National Diamond Wet Cutting Diamond Core — 5in. dia. @ Tools, Equipment & Painting online store

Hardened stainless steel orifice nozzles last up to 5 times longer than ordinary nozzles. 1/8in.NPT male thread. 2.0 nozzle size15° spray pattern
Manufacturer: General Pump
SKU: 228840
Category: Pressure Washers

"Drop-forged heavy duty tow hooks. Item#s 12896 and 12898 are sold as pairs of right and left hand hook patterns, and use 5/8in. and 3/4in. bolts.Bolts not included. U.S.A. Plain Finish 44,600 lbs. Capacity 9in. L x 2.9in. W Dimensions"
Manufacturer: Buyers
SKU: 12898
Category: Towing

"Steel industrial pallet racking is ideal for home, garage or business. U.S.A. Beams and decking sold separately. High-capacity rack frameMeasures 42in.D x 144in.H5028-lb. capacity per beam level20,000 lbs. total frame capacityTeardrop-style slots forquick, easy assemblyU.S.A.Model AK-F20-42144000GV"
Manufacturer: USP
SKU: 1143974
Category: Storage

"Make that resting place for your garden,lawn or patio. Attractive, weatherproof and easy. Durable polyethelyne. Pair of bench ends. U.S.A. Build chair or bench from 28in. to 7ft. long in minutes Uses standard 2x4 lumber (not included)"
Manufacturer: Northern Tool and Equipment
SKU: 18353
Category: Outdoors

"The powerful 3.6 Amp motor delivers 4500 RPM for fast, efficient sanding. The design places the motor directly over the padfor better balance and control, and the tool is lightweight for easy handling. 3.6 Amp Motor4500 RPMLightweight for easy operationBall and needle bearings for long lifeLock–on button for continuous operation Double insulatedIncludes #80 abrasive pad, plastic pad, side handle and hex wrenchModel GV5000"
Manufacturer: Makita
SKU: 1591937
Category: Power Tools

Componentfor tractor three-point hitch system. This Lift Arm is built to ASAE specifications. LH Stub
Manufacturer: Northern Tool and Equipment
SKU: 2501907
Category: Ag Equipment + Excavating

"Great for drywall, wood, plaster and more. Perfect for plumbers and electricians. 12 blades, in sizes 3/4in., 7/8in., 1in., 1 1/4in., 1 1/2in., 1 3/4in., 2in., 2 1/2in., 3in., 3 1/2in., 4in. and 5in. diameter. Includes 3/8in. mandrel,drive plate, hex wrench and blow molded storage case."
Manufacturer: Northern Tool and Equipment
SKU: 158852
Category: Power Tools

Full-polished combination wrench set in SAE sizes 1/4in. to 3/4in. Stores in plastic rack case with hand grip. Limited lifetime warranty. 10-pc. SAE wrench set includes: 1/4in. (Item# 558226); 5/16in. (Item# 558227); 11/32in. (Item# N/A); 3/8in. (Item# 558228); 7/16in. (Item# 558229); 1/2in. (Item# 558230); 9/16in. (Item# 558231); 5/8in. (Item# 558232);11/16in. (Item# 558233); 3/4in. (Item# 558234)
Manufacturer: Northern Industrial Tools
SKU: 558285
Category: Hand Tools

Fractional/Number/Letter size drill set. 118° point high speed steel. Fractional: 1/16in. to 1/2in. by 64ths. Numbers 1 to 60.Letters A to Z. Set comes complete with deluxe metal index.
Manufacturer: Northern Tool and Equipment
SKU: 15131
Category: Power Tools

"Construction-Grade Truck Box comes with tote for your your tools and gear, plus plenty of storage space for power tools, equipment, everything you need for the job. Rugged design and durable construction means you&;ll have your truck box for a long time.Constructed of tough .063 aluminum diamondplate One-piecemain tub designed for greater strength Unique foam-filled single lid is incredibly strong and rigid Fully welded seams Dual 40-lb. gas struts Hidden paddle latch rod increases usable space Deep heavy-duty molded five-section tray Storage at each end for assorted tools 2 Removable racks for up to 10 screwdrivers Includes mounting J-Hooks and nonskid mat 3-year limited warranty; Truck Ship. U.S.A. Measures 20in. W x 13in. H x 72in L Fits Dodge Ram, Ford F250 and F350 Pickups"
Manufacturer: Northern Industrial Tools
SKU: 348124
Category: Automotive

"Large casters and Safe-Lock features. Steps and platforms are made of slip-resistant, expanded metal. Durable gray enamel finish. Constructed with 1in. O.D. steel tubing to meet or exceed all OSHA standards. Truck Ship. U.S.A. 7steps Handrails 70in. platform height Base Dimensions: 30in. x 53in."
Manufacturer: Cotterman
SKU: 143926
Category: Shop Supplies

Budget–priced helmet has flip front and ratchet-action head gearto adjust head size. 2in. x 4 1/4in. viewing area with #10 shade filter. Impact–resistant polypropylene materialMeets ANSI Z87.1 standards
Manufacturer: Hobart
SKU: 1648512
Category: Welding

"The Judge" Eastwood's exclusive panel gap gauge allows precise and accurate alignment of hood, doors, fenders, decklids, etc., during final assembly or component replacement. Made from Nylon, the "fender gauge"blades will not scratch or mar painted surfaces. Contains 8 blades; 4 @ 1/32", 3 @ 1/16", and 1 @ 1/8". A must-have for the detail enthusiast!
SKU: 31129
Category: Auto Body Body & Fender Body Tools & Accessories

"This is the most versatile demo hammer in its class. Works for both vertical and horizontal applications. Handles demanding jobs, yet maintains low vibration level (16 meters/second) and low noise level of only 130dB. Powerful 13 Amp motor delivers 1450 BPM and 27.5 joules of impact energyBit type 1-1/8in. hexLightweight with enlarged rubberized grip for comfort control and less fatigueLock-on button for continuous operationRugged side handle swivels 360° and adjusts to severaldifferent positionsModel HM1304BStandard EquipmentSteel tool case (183598-3)"
Manufacturer: Makita
SKU: 151863
Category: Power Tools

"Keep garage, shop orbasement floors looking like new. Protective mat features rib construction to channel water and debris out and away from work area. Large 9ft. x 20ft. size. Durable nonslip material stays in place and wont absorb oil or antifreeze. Cleans easily with soap and water. In Midnight Black. U.S.A."
Manufacturer: Northern Tool and Equipment
SKU: 67923MB
Category: Shop Supplies

22mm chrome vanadiumcombination wrench with mirror finish.
Manufacturer: Northern Industrial Tools
SKU: 558257
Category: Hand Tools

"Includes a #5 spline 6in. extended anvilIdeal for truck tire service using spline driveModel# IR285AS-6100-1000 ft.-lbs. working torqueMax. 1450 ft.-lbs. 5000 RPM @ free speed750 BPM10 CFM average air consumption37 CFM@ load1/2in. straight air inlet, 1/2in. hose size1 1/4 in. standard bolt capacity20in. overall length"
Manufacturer: Ingersoll Rand
SKU: 154164
Category: Air Tools

Add the brilliance of these to quality enamel paints to your vehicle's design. They can be applied by airbrush, roller, or brush. The choice paint of professionals for pinstriping and lettering because oftheir excellent flow
SKU: 105 37088Z
Category: Auto Body Pinstriping / Airbrushing Pinstriping Paints

Free speed 150 RPM 50 ft.-lbs. torque 4 CFM; 90 PSI; 1/4in. air inlet Drop forged housing Ball and needle bearing constructionPlanetarygear system
Manufacturer: Northern Industrial Air Tools
SKU: 15742
Category: Air Tools

"Use a flex coupling to mount your engine to pump. Synthetic rubber inserts between the coupling halves. When ordering, get one to fit the motor and one to fit the pump shaft diameter. Order two halves plus insert for complete coupling. Fits model LO 99 and L 100 series up to23 HP at 3600 RPM. Made for 2 bolt brackets. Size: 1in. Keyway: 1/4 x 1/8 O.D.: 2 1/2in."
Manufacturer: Northern Tool and Equipment
SKU: 3017
Category: Hydraulics

Utility service carts are indispensible in the shop or garage as a place to keep tools and equipment that are needed to move from job to job or location to location. This cart features 5inswivel casters with a full 500lb capacity. Top tray measures 36 X 24 inches and is overall 33 inches in height.
SKU: 10353
Category: Tools & Equipment Shop Tools Unique Tools

Duplicate or restore the OEM finish on exterior black-trim surfaces. Thissemi-gloss paint adheres to steel,stainless,aluminum, and even chrome surfaces.
SKU: 10023 Z
Category: Specialty Coatings Detail Coatings Trim Painting / Touch Up

For inline mounted pumps that pump used oil. Foruse with items #109540 thru #109542 inline rather than on a barrel or tank.
Manufacturer: PBL
SKU: 109545
Category: Fuel Transfer + Lubrication

"This versatile, lightweight, welded chain has a variety of applications. From swing sets and tailgates to farming and boating. Zinc plated finish resists rust. Not to be used foroverhead lifting. U.S.A. Trade size: 4/0Wire diameter: .218 in.Approx. links per foot: 8 670 lbs. maximum working load200 ft. per pail"
Manufacturer: Peerless
SKU: 335610
Category: Material Handling

"Really tough! Injection molded from high density polyethylene, these big bins have extra heavy, double-thick walls that allow you to stack up to 200 pounds of tools, merchandise, parts and other cargo. Hopper front allows easy access. Bins can withstand temps ranging from -40øF to +250øF. Not affected by water, chemicals or solvents. The 29in.L bins have a spread bar foradded strength. U.S.A. 29in x 18 3/8in x 11 7/8in Yellow"
Manufacturer: Quantum
SKU: 178404R
Category: Storage

"Dolly mount fan has a belt drive 115V/7.3 Amp motor. 2-speed, 1/2 HP motor features heavy duty tube frame and a 4 blademaximum CFM of 14,445. Fan tilts up or down 90° and also features positive locktilt control. 9,950 maximum RPM. Truck Ship. U.S.A."
Manufacturer: Northern Tool and Equipment
SKU: 250697
Category: Shop Supplies

"Replacement top for canopy is made of fire-retardant, UV treated 6-oz. polyethylene. Replaces top for Item#s 55420 and 55428. Replacement canopy for Item#s 55420 and 55428BlueFire-retardant, UV treated 6-oz. polyethyleneFits20ft.L x 10ft.W canopy (1 3/8in. pipe frame)"
Manufacturer: Canopy Factory
SKU: 654202
Category: Tarps + Covers

"Make two into onewith this easy connector, attaching quickly without tools. Offered in a variety of sizes, these threaded links can match almost anything. Use with chain of equal or lower working load limit. 5/16 in. wire diameter2.31 in. inside length.69 in. inside width2.94 in. overall length.38 in. opening"
Manufacturer: Peerless
SKU: 336759
Category: Material Handling

Match size with pillow blockwhen ordering. Size: 1 1/2in. Type: 2-Bolt
Manufacturer: Northern Tool and Equipment
SKU: 18316
Category: Hydraulics

Category 0 hitch. U.S.A. Factory shipped.
Manufacturer: Groundhog
SKU: 2500993
Category: Ag Equipment + Excavating

Kwikure Epoxy Primer is a hi-solids catalyzed primer that meets all current air regulations. It is a National Rule and SCAQMD Rule 1151 compliant primer. This primer is designed to be the first primer applied to bare steel, aluminum, fiberglass,magnesium and galvanized surfaces. It's tenaciousadhesion, hi-build,and excellent durability, water and corrosion resistance makes it a logical choice for the basis of a long lasting paint job. May be reduced up to 10% with RU-300 (8529ZP 004 QT) for improved flow out and sprayability.
SKU: 8501ZP 001 GAL
Category: Auto Body Painting House of Kolor Paints

"RB-OT Series Blades are designed for road grading and maintenance, landscaping, snow removal and more. Truck ship. U.S.A 84in. blade width5 forward and 5 reverse settingsSpecial formed, fixed moldboardReversible high carbon, heat-treated steel cutting edgeReinforced 3-pt. wraparound frame for extrastrengthOffset left or right up to 12in.Tilts to approx. 30°Truck shipU.S.A."
Manufacturer: King Kutter
SKU: 256023
Category: Grounds Maintenance

"Designed for industrial-duty performance. 20ft. lift height. Compact in size but big in features with a multiple disc motor brake, overload clutch and chain end stop for safety. Lifetime limited warranty. 575 Volt three phase, 60 HzLimit switches are adjustable to regulate upper and lower load travelBrass nuts improve repeatability and chain positioningOil bath transmission for longer, quieter operationNEMA 3R push button station fits operators hand for thumb two-handed operation24 Volt control foroperator safetyCompact aluminum housing frameHardened load chain for consistency and long wearLimited lifetime warrantyModel ELC-07554W"
SKU: 152946
Category: Automotive

Recommended by many high performance engine rebuilding books, Glyptal seals the tiny ports left in metal after bead blasting and leaves the engine block interiors smooth. Helps keep the oil clean andflowing freely. Acid and oil resistant. Used on generator and alternator armatures. Glyptal has great electrical insulating properties too!
SKU: 46000 Z
Category: Performance & Tune-Up Drivetrain Chemicals & Additives

Working pressure of 4500 PSI. 3/8in. pipe thread. Length: 18in. Bursting Pressure: 16000 PSI
Manufacturer: Northern Tool and Equipment
SKU: 50250
Category: Hydraulics

Great storage forsupplies and equipment. Made of durable polypropylene with heavy–duty “Cam–Lock” latches recessed to prevent snags. Weathertight gasket seals out dust and debris. Rhino Rib™ reinforcement on body for extra durability. Accepts standard locks. 32¬inL x 15inW x 8¬inH. U.S.A.
Manufacturer: Kolpin
SKU: 48810
Category: Sporting Goods + Toys

Keep Your Shop Neat - Here's a place for all those Eastwood Paints and Coatings. Convenientrack holds 6 aerosol cans. Made from durable powder coated steel for years of use.
SKU: 10206
Category: Tools & Equipment Shop Equipment Storage

Fuel Level (0 ohm empty/ 30ohm full)- For most GM vehicles before 1965.
SKU: 74438
Category: Auto Accessories and Gifts

"Interior rear view mirrors feature auto dimming, compass and temperature display. Temperature readout shows Fahrenheit and Celsius measurements. Displays either indoor or outdoor temperature depending on where the temperature probe is placed. Self calibrating electronic compass and sleek design. Easy installation. 10in.L x 1in. W x 3in. H. U.S.A."
Manufacturer: CIPA Mirrors
SKU: 330387
Category: Towing

"Includes lugbolts, ductcap, bearings and seals. Sold as a single side, not a pair. Size: 12in. Description: 8 Hole Drum and Hub"
Manufacturer: Reliable
SKU: 124998
Category: Trailers + Trailer Parts

"26 Watts has comparable output to a 125 Watt incandescent light. Includes 2 cool-running 13 Watt, 10,000-hour fluorescent bulbswith independent on/off switches for full- or half-power light output. Clear polycarbonate lamp protector, high-gloss reflector, convenient hang hook and tool hook. Electronic ballast for instant no-flicker, cold-weather starts. 6ft., 16/3 SJT cord with 12 Amp grounded receptacle."
Manufacturer: Wel-Bilt
SKU: 160938
Category: Lighting

"Replace worn-out corrugated bins permanently with these tough, durable, high density plastic bins. Quantum Shelf Bins are the industry standard for quality. These durable polyethylene bins feature a molded in label holder, built-in rear hanglock which allows bins to tilt out for complete access. A wide hopper front allows complete access to contents. Edges are reinforced for added strength. They are designed for 12in., 18in. and 24in. deep shelf units, racks or standard shelves. Bins are waterproof, impervious to most chemicals and unaffected by grease or oil. Sold in cartons only. U.S.A. 11 7/8in. x 23/4in. x 4in. Red"
Manufacturer: Quantum
SKU: 278500R
Category: Storage

Sounds an 85dB alarm when aleak is detected. Requires one 9–Volt battery.
Manufacturer: Northern Tool and Equipment
SKU: 55915
Category: Water Pumps

BRAKE LIGHT SWITCH - PUSH BUTTON #80172 - Pedal/linkage activatedswitch.
SKU: 60310
Category: Performance & Tune-Up Electrical & Diagnostic Switch Controls

Hardened stainless steel nozzles. Nozzle Size: 4.0Spray Pattern: 40°
Manufacturer: GP General Pump
SKU: 253024
Category: Pressure Washers

"4000-lb. capacity forks are 1 1/2in. x 4in. Easy, convenient and quick to use. High quality forklift forks comply with all ITA requirements. Truck ship.U.S.A."
Manufacturer: Atlas
SKU: 103974
Category: Material Handling

"Bicarbonate, non–hazardous and environmentally–friendly. Medias large, jagged, irregular shapemakes it extra aggressive. U.S.A. Factory shipped."
Manufacturer: Ace
SKU: 155405
Category: Sandblasters

Wires directly to 120VAC StrongArm winch models. Pendant features "In/Off/Out" switch.
Manufacturer: StrongArm
SKU: 14001
Category: Winches

"Brass movement with C shaped Bourdon tube up to 600 PSI. Helical over 600 PSI. 1/8 NPT male connection. For use with air, gas,oil or water. Black enameled aluminum pointer, white aluminum dial and temperature compensating polycarbonate window. Glycerin filled to dampen pulse and vibration. Accuracy: ASME/ANSI B40.1 Grade A (2-1-2%) Range PSI: 0-60"
Manufacturer: Northern Tool and Equipment
SKU: 53721
Category: Gauges

Long-lasting zirconia abrasive discs take the place of resin fiber discs and grinding wheels. Help make weld joints almost undetectable and reduces need for final filler. Flap design runs cooler to reduce panel warping and won't gouge metallike ordinary grinding discs. Each flap disc will out last approximately 15 resin discs. Order 1-2 grits coarser than resin fiber discs. Use on your high-speed grinders.
SKU: 19057
Category: Metal Shop Fabrication Prep & Finishing

"Protanium™ steel with Proguard™ corrosion resistant finish. 22 tool S.A.E. L-wrench and GorillaGrip™ set. You get the S.A.E. L-wrench set with 13 BALLDRIVER® sizes. U.S.A. Bondhus Balldriver sizes: .050, 1/16in., 5/64in., 3/32in., 7/64in., 1/8in., 9/64in., 5/32in., 3/16in., 7/32in., 1/4in., 5/16in. and 3/8in. GorillaGrip® unit with 9 swing-out HEX tools, sizes5/64in. thru 1/4in."
Manufacturer: Bondhus
SKU: 156492
Category: Hand Tools

"Pump has a thermally protected, 115 Volt, oil–filled motor and a durable, cast ironhousing with protective epoxy coating for corrosion resistance. Pumps up to 80 GPM (4800 GPH) @ 5ft. Maximum lift of 18ft. 2in. discharge with 2in. solids handling. Stainless steel screws and fasteners. Nylon, glass–filled, vortex–style impeller. Piggyback mechanical float switch with an (On) level range of 9in.–14""; (Off) level range of 2in.–6in. Includes 15ft. power cord. UL and CSA listed."
Manufacturer: Little Giant
SKU: 108809
Category: Water Pumps

Top-quality multicolor moving pad has a unique polyester/cotton woven topside in blue and green.The bottom side is constructed of nonwoven material. Pad has 4 finished corners and is sewn with a zigzag lockstitch configuration. 72in. x 80in.
Manufacturer: Northern Tool and Equipment
SKU: 142211
Category: Tarps + Covers

Stay safewith these DOT-approved helmets for Go-Kart fun.
Manufacturer: Northern Tool and Equipment
SKU: 135821
Category: "Go-Karts, Mini-Bikes + Scooters"

30–ft. loop. Fits all standard trimmerheads. U.S.A.
Manufacturer: Unifit
SKU: 80293
Category: Grounds Maintenance

230V heavy-duty Franklin motor. Stainless steel motor shell. 1in. NPT discharge. 3-wire.Requires control box. U.S.A. 1 HP Franklin motorPumps up to 823 GPHDraws water from 275 feetU.S.A.Model T100S10-2
Manufacturer: Wayne
SKU: 109267
Category: Water Pumps

"Built to give you many years of dependable pumping service. Capacitor-start, overload-protected motor turns at 3450 RPM. Ceramic/carbon-facedseal for long life. Stainless steel shaft will not rust or corrode. 2 in. suction; 1 1/2 in. discharge NPT female connections. One year warranty.2 HP, 5250 GPH Lawn Sprinkler PumpDelivers 5250 GPH at 0ft. lift and 20 PSI discharge pressure, 3420 GPH at 30 PSI with 25ft. suction lift. 50 PSI max. 230V. U.S.A. Designed to operate underground sprinkling systemsDraws water from well, lake or ponds for watering, pool filling, or any other applications where high water volume is neededHigh effeciency square flange motor is thermally protected to prevent over-heating"
Manufacturer: Wayne
SKU: 10805
Category: Water Pumps

"5.6in. LCD monitor allows for 2-camera viewing in full color. Comes with weather-resistant color camera, mounting brackets, two 30-ft. cables and installation hardware. Factory shipped. Mirror image function gives you true back viewVideo output for recordingDC 12V allows system to be installedin any vehicleApplications: Garbage trucks for backup; Waste management vehicles to monitor hopper area; School buses to monitor back and side doors; Animal transportation vehicles to monitor livestock; Recreation vehicles to see dead spots"
Manufacturer: First Alert
SKU: 971943
Category: Safety

1–lb.donut. Fits all standard trimmer heads. U.S.A.
Manufacturer: Unifit
SKU: 80305
Category: Grounds Maintenance

Replace your trailers drum brakes with ventedrotor disc brakes for faster stopping power. Kit comes with everything you need. GalvX-coated rotors resist corrosion. Bearings are 1 3/8in. (inner) and 1 1/16in. (outer(Seal is packed in
Manufacturer: Tie Down
SKU: 124968
Category: Trailers + Trailer Parts

"John Deere POWERTECH diesel engines are the standard in the industry. This is a complete package from front to back, including radiator, muffler with rain cap, engine block heater, battery rack and cables,control panel with hour meter, volt meter, ammete"
Manufacturer: Stateline Power
SKU: 162305
Category: Generators

"Ideal forcooling motors in electrical components, compressors, heaters and more. Amperage and CFM may vary. Used in good-to-excellent condition. 12V40 CFM3 1/2 in. square1 in. deep"
Manufacturer: Northern Tool and Equipment
SKU: 07815
Category: Shop Supplies

"Youll keep discovering uses for this amazing tool. 31in. aluminum Grab-It has spring-loaded, suction-cup jaws that spreada full 4in. wide to pluck large and small items off high shelves. Jaws close so precisely you can reach down and snatch a tiny hex nut right off the driveway under your car...or grab a throw pillow thats fallen behind the couch. All without bending, stretching, stooping or straining. A real necessity for people with arthritis or restricted movement. Quick way to pick up around the shop or around the yard after a get-together, too."
Manufacturer: Northern Tool and Equipment
SKU: 25172
Category: Shop Supplies

Two drawers organize tools while upper cabinet provides room for oversized toolsand supplies. Steel and plastic construction. Medium drawer is 2 in. H and large is 4 in. H. Overall dimensions 27 1/4 in. W x 32 in. H x 13 1/2 in. D. Red and gray.
Manufacturer: Stack-On
SKU: 178070
Category: Storage

Polished high-carbon drop-forged steel. Heat treated to hold its edge. Useful crushingarea. Channellock Blue comfort grips. U.S.A.
Manufacturer: Channellock
SKU: 558655
Category: Hand Tools