National Diamond Diamond Grinding Cup — 4in. dia. @ Tools, Equipment & Painting online store

Hardened stainless steel nozzles. Nozzle Size: 3.5SprayPattern: 25°
Manufacturer: GP General Pump
SKU: 253016
Category: Pressure Washers

"Powerful, compact design! Smashes down used filters by 75% and removes over 95% of residual oil. Just insert a filter up to 6 in. in diameter and close the door. Aluminum frame cabinet prevents oil leakage. Takes a space just 12 3/4 in. x 12 3/4 in.. 10-ton unit is 28 1/2 in. high, 15-ton is 40 in. H. Each requires at least 25 CFM and 75 PSI. Truck Ship. U.S.A. Filters up to: 13 in.Crushing Force: 15 tons"
Manufacturer: JohnDow
SKU: 128351
Category: Fuel Transfer + Lubrication

This Kit includes the following 8" wheels: one Sisal, two Spirals& one Loose; and one each of the following Compounds: Emery, Tripoli, Stainless, & White Rouge; and Buffing instructions.
SKU: 13112
Category: Metal Buffing & Finishing Buffing Buffing Kits

Single-phase motor withcapacitor start. UL recognized/CSA certified. U.S.A. 115/208-230 Volts8.7 Amps @ 230V2 HPTotally enclosed with fan coolingC-face with rigid baseOperates at 3600 RPMNEMA 56C frameManual overload protection5/8" shaft Unit can be wired either clockwise or counter clockwise.UL recognized/CSA certifiedU.S.A.Model 116509
Manufacturer: Leeson Electric Motors
SKU: 162477
Category: Pressure Washers

Rugged and durable yet lightweight creeper is able to handle a 300-lb. capacity. 3-pc. center roller system allows for 360° turning (Zero Turning Radius) for optimum maneuverability. 2 base grips on the bottom help hold creeper securely in place to prevent unwanted rolling when torque is required or when getting up. U.S.A. Ergonomic design fits body contours while providing lumbar supportLow-profile(4in. high) means easier access and more room under vehiclesBuilt-in handles for portabilityPolypropylene wheelsU.S.AModel 11925
Manufacturer: Blitz
SKU: 63020
Category: Automotive

"Fast, easy way to clean buildings, large trucks, signs and other big equipment in half the time... and from the safety of the ground! Innovative design retracts to a more manageable size and allows for easier field maintenance. Heavy-duty screw connectors and innovative clamping system for the gun and lance increase strength and durability. New higher-flow spray gun allows for low pressure chemical applications*. Nozzle holderaccepts standard quick-couple spray nozzles (nozzles not included). Includes gun with a 3/8ijn. female NPT inlet and 3/8in. male plug x 22mm male screw-type connector. Length range: 6ft. – 12ft.3500 PSI max. pressure8 max. GPM"
Manufacturer: General Pump
SKU: 22812
Category: Pressure Washers

Heavy duty tread formaximum stability and improved cleanout. Unique lug gives superior traction in any soil. Reinforced sidewall protects rim and prevents tears and punctures. Type: 12 x 16.5 10PR Load Range: 5620 Lbs.
Manufacturer: Northern Tool and Equipment
SKU: 122635
Category: Tires + Wheels

Heavy–duty cast iron vise mounts to any drill press with a slotted base and is used for precision drilling of any material. Serrated replaceable4in. steel jaws. Chrome swivel crank handle for easy tightening. Jaws open to 4in. and bottom groove at fixed jaw accepts round stock up to 1/2in. diameter.
Manufacturer: Northern Industrial Vises
SKU: 153810
Category: Hand Tools

Onepair of 9/16in. diameter spring bushings. Nylon Length: 1 3/4in. Width: 3/4in. OD: 3/4in. ID of bushing: 5/8in.
Manufacturer: Northern Tool and Equipment
SKU: 125363W
Category: Trailers + Trailer Parts

"Matrix II high–speed steel teeth with 8% cobalt10/14 teeth per inchFor cutting all woods, nail embedded woods, composition material, plastic, light gauge non–ferrous metals and aluminum5/8in. width for higher flexibilityTough bi–metal design for fast–cutting, long–lasting bladelife1/2in. universal blade tang fits all SawzallsBlade reversible in clamp5 blades per packModel 48–00–5193U.S.A."
Manufacturer: Milwaukee
SKU: M0347
Category: Power Tools

Armature operates in oil system so impact is cushioned and noise is reduced. Seal wear is eliminated for longer valve life. Moisture and dirt-resistant molded coils. Complete with bolt kit and electrical junction box. Spool Style: 3-PositionSpring Center Open Size: D03 GPM: 31 12V DC
Manufacturer: Northern Tool and Equipment
SKU: 202503
Category: Hydraulics

"Delivers 20% more air volume (78 cfm) than competitive modelsUtilizes 18V batteryBattery and charger sold separatelyCan be used as a blower or as a vacuum with dust bag attachedUp to 9.5 minutes of continuous operation from a single charge at high speedHigh performance “Makita” motorMaximum air velocity 179 MPHVariablespeed (0-18,000 RPM) for controlled operationCompact and well balanced with an ergonomic handle for easy and comfortable handling Long nozzle for directional air flowWeighs only 4.6 lbs. (with battery)20 7/8in. overall lengthIncludes nozzle and dust bagModel UB181DZ"
Manufacturer: Makita
SKU: 151841
Category: Grounds Maintenance

"1 each of 0°, 15° and40° nozzles4GPM/4000 PSI"
Manufacturer: GP General Pump
SKU: 26454
Category: Pressure Washers

Telescopinghandle can be stored underneath your dolly while not in use. Handle measures 29 1/2in. long. 660-lb. load capacity.
Manufacturer: Northern Tool and Equipment
SKU: 00199
Category: Material Handling

"Great way to secure your valuable cargo! CAM-style tie-downs each have a minimum break-rated capacity of 1200 lbs. Pull strap end to tighten. Press cam to release. Tough blue nylon webbing is 66in. long x 1in. wide. Black vinyl-coated steel S-hooks on each end are 45/8in. long, have 1in. radius. Made in the U.S.A."
Manufacturer: S-Line
SKU: 11067
Category: Towing

3/8in. drivechrome vanadium 20mm standard socket.
Manufacturer: Northern Industrial Tools
SKU: 558087
Category: Hand Tools

Apply liquids, degreasers, lubricants, rust preventatives, and paints with the Pre-Valve Aerosol Sprayer. Fill the 6 oz. container 2/3 full, screw on the 2.1 oz. pressurized propellant can and spray. One propellant can will spray upto 16 fluid ozs.
SKU: 10387 Z
Category: Tools & Equipment Shop Tools Unique Tools

Here's a laser-cut freehand airbrush template to expand your repertoire of custom graphic effects. Made from a solventproof flexible plastic for easy use on flat or curved surfaces like fenders, motorcycle tanks, and helmets. Similar stencils to this Skullmaster "Petting Zoo" (FH SK10 SP)by Craig Fraser are referenced in Craig's (37342) Mastering Skullmaster video. Work this popular graphic into your next work of art. See our website www.eastwood.com for this and other template images.
SKU: 37304
Category: Auto Body Pinstriping / Airbrushing Airbrushing Stencils & Templates

Fits over most personal eyewear. Lightweight clear polycarbonate lens with clear built–in–sideshields. 99.9% UV protection.Meets ANSI Z87.1–1989 and CSA Z94.3. U.S.A.
Manufacturer: AO Safety
SKU: 174635
Category: Safety

"A non–metallic blend used to permanently color the surface of freshly placed concrete using the shake–on or broadcast method. Formulated to produce uniform, consistent color. Designed to be used alone or with BonWay True Color Release Agent when imprinting concrete with texture mats. Available in a 5–gallon pail that contains 63 lbs. of material. Coverage requirements vary according to the color selected and intended use. Hardener should be applied at a rate of 60 lbs. per 100 sq. ft.Lighter or pastel colors may require as a much as 100 lbs. per 100 sq. ft. U.S.A. Factory shipped. Autumn Brown"
Manufacturer: BonWay
SKU: 999821
Category: Construction

FPT x FPT with black nylon handle. The nickleplating is perfect for chemical applications.
Manufacturer: Northern Tool and Equipment
SKU: 53761
Category: Hydraulics

Great for lifting and moving long objects or large pallets. Tough welded steelconstruction for durable use. OSHA requires that extensions do not exceed length of forks on which they are installed by more 50%. Truck ship. U.S.A.
Manufacturer: Atlas
SKU: 103985
Category: Material Handling

IRWIN Vise-Grip locking pliers — The Worlds Most Versatile Hand Tool The 18DR has a jaw adjustment of 0in. - 8in. (0 - 200mm) with a throat depth of 9 1/2in. (241mm)Wide-opening jaws provide greater versatility in clamping a variety of shapesTurn screw to adjust pressure and fit workStays adjusted for repetitiveuseConstructed of high-grade heat-treated alloy steel for maximum toughness and durabilityGuarded release trigger quickly unlocks and protects from accidental release.Model 211
Manufacturer: Irwin Vise Grip
SKU: 159205
Category: Welding

"Keep your crossover toolbox neat and tools organized with this rugged organizer. Two 55 1/2in. L x 8in. H black high-impact polystyrene panels fit along the side walls of the truckbox. Recessed slots in the panels accept four dividers (included), which allowyou to separate tools, hardware and supplies. Organizer kit fits single-lid, gullwing and C-channel truckboxes between 17 3/8in. to 17 3/4in. wide and at least 56in. long. U.S.A."
Manufacturer: Northern Industrial Tools
SKU: 3490200
Category: Automotive

You get two ceramic nozzles and one washer. ALCNozzle Size: 5/32in. CFM@ 80 PSI: 25
Manufacturer: Northern Tool and Equipment
SKU: 155517
Category: Sandblasters

These 270deg "full sweep" gauges feature a quality engineered bourdon tube design and durable, performance grade movements for unsurpassed accuracy under the most demanding conditions. Includes 6 ft.nylon tubing and universal T-fitting.
SKU: 74961
Category: Performance & Tune-Up AutoMeter Phantom

"Efficient, clean way to transfer bulk oil and hydraulic fluids. 1/2 HP pumpsfluids at 4 gallons per minute. Features self-priming, positive displacement design that mounts directly on barrel with supplied adaptor. Built-in bypass valve and on/off switch. 3/4in. inlet port; 1in. outlet port. Comes with 35in. suction pipe. 8in.L x 3/4in.D hose, nozzle and bung adaptor. 112 Volt DC, 4.25 GPM output. U.S.A."
Manufacturer: PBL
SKU: 109541
Category: Fuel Transfer + Lubrication

"Powerful 3-speed 3/4 HP fan blasts out up to 3200 CFM, moving air under and over carpets to dry them fast— up to 4 times faster than ordinary blowers! Portable squirrel-cage blower also dries out wet floors and area rugs. Helps control temperatures in remote rooms temporarily without heating or cooling. 110 Volt, 3/4 HP motor draws 9 AmpsSwitch selects 2200, 2700 or 3200 CFM (plus OFF)25-ft. cord19in.L x 18in.W x 19in.HModel 3SPEED-3/4HP"
Manufacturer: Namco
SKU: 173100
Category: Shop Supplies

"LED X mini lightbar features an extruded aluminum frame with a clearpolycarbonate lens. Lens stays clear until activated. Low power needs, yet long–lasting: 100,000 hours of use — up to 100 times the life of ordinary lights! 12 Volt DC and low amp draw. SAE J845/595, Class II approved. Measures 22.5in.L x 12.25in.W x 2.1in.H. Magnetic mounts include lighter plug. 5–year limited warranty or 100,000 hours. U.S.A. 4–corner, 1 fromt/1 back"
Manufacturer: PSE Amber
SKU: 1635633
Category: Safety

Add the brilliance of these top qualityenamel paints to your vehicle's design. They can be applied by airbrush, roller, or brush. They have excellent flow, a nd a durable, long-lasting finish.
SKU: 105 37127Z
Category: Auto Body Pinstriping / Airbrushing Pinstriping Paints

"3-way flashlight includes powerful Krypton beam, 3 LED area lightsand CCFL fluorescent area and power failure light. Rechargeable unit includes Ni-Cad batteries and charger. RechargeableBright Xenon flashlight beam3-LED long-lasting area lightCCL fluorescent area and power failure light3-position pushbutton light selectorRubber grip and bezel guard10 1/2in. longIncludes 4 AA rechargeable Ni-Cad batteries and 110/120 Volt AC dock mount wall charger"
Manufacturer: Vector
SKU: 160551
Category: Lighting

Contains 20 popular sizes ofsprings. Plastic case.
Manufacturer: Performance Tool
SKU: 178211
Category: Shop Supplies

"Hardened high-grade steel construction and heat treated to withstand rough use andhard pounding. Includes 3/4in. x 3/16in. standard flip socket, 19mm x 21mm metric flip socket and 3in. extension. Model IR7400SMFE. For use with 2 in. extended anvil tools; Item#s 15408, 1540312 & 15418"
Manufacturer: Ingersoll Rand
SKU: 154187
Category: Automotive

Flakes may be added to any of our SHIMRIN Universal Bases, Kandys, Clears or Kustom Bases. Built from ultra thin polyester, our flakes are the lightest and easiest to use. Ultra Mini Flakes are easy to apply and smooth out with topcoats. These flakeshave the brilliance of a much larger flake, combining the ultimate in a flake look and ease of use.
SKU: 8544 001 3OZ
Category: Auto Body Painting House of Kolor Paints

"Swivel base bench 4in. vise with replaceable jaws, large anvil area. Dimensions: 14in.L x 6in.W x 7 1/2in.H Opening: 5 1/2in. Mounting holes are 6 7/8in. apart if adjacent and 97/8in. apart if opposite."
Manufacturer: Northern Tool and Equipment
SKU: 15301
Category: Hand Tools

"New! High–quality hoses from Northern! A new lineof hoses in response to the demand for a greater selection of longer, more durable hoses with higher–quality hose fittings. New longer sizes: 35 ft. (instead of 25 ft.). Heavy–duty red rubber3/8 in. x 35 ft."
Manufacturer: Northern Industrial Tools
SKU: 1586651
Category: Air Tools

"A non–metallic blend used to permanently color the surface of freshly placed concrete using the shake–on or broadcast method. Formulated to produce uniform, consistent color. Designed to be used alone or with BonWay True Color Release Agent when imprinting concrete with texture mats. Available in a 5–gallon pail that contains 63 lbs. of material. Coverage requirements vary according to the color selected and intended use. Hardener should be applied at arate of 60 lbs. per 100 sq. ft. Lighter or pastel colors may require as a much as 100 lbs. per 100 sq. ft. U.S.A. Factory shipped. Jet Black"
Manufacturer: BonWay
SKU: 999831
Category: Construction

5in.–long die–cast metal frame with 1in. capacity by .0005in. Ratchet stopand spindle lockout to hold measurement. Adjustable realignment to “0”.
Manufacturer: Northern Tool and Equipment
SKU: 558468
Category: Measuring Tools

"Ideal for exhaust, suspension, and other underhoist work. Features a low height of 60in. and a raised height of 79in. Large 12in. diameterbase provides stability. ACME rod allows precise height adjustment."
Manufacturer: Southern Equipment
SKU: 145912
Category: Automotive

"This aluminum tank is designed specifically for transferring diesel fuel from the bed of a pickup truck to remote or heavy equipment. L-shaped design works with your crossover box. Tank comeswith a 2in. filler tube, 2in. female pipe thread coupling for m"
Manufacturer: Northern Industrial Tools
SKU: 3490144
Category: Fuel Transfer + Lubrication

"The Gerber® Harsey Air Ranger series of knives feature lightweight yet durable materials, including surgical steel blades and checkered aluminum handles. Thumbstuds for easy one-hand opening and stainless steel pocket clip for easy access. Blades are 3 1/4in. L with serratededges. Designed by custom knife designer William Harsey, Jr. Limited lifetime warranty. Blue"
Manufacturer: Gerber
SKU: 179013
Category: Sporting Goods + Toys

Original style Pontiac Rallye-2 all chrome Wheel. Quality accurate reproduction of the original. Wheel size is 16"x8" with 4-1/2" backspace. Configuration is 5-lug with a 4.75 inch bolt pattern. Compatible withdisc brake applications. This is a special order wheel and is non-returnable. Made in the USA.
SKU: 62137
Category: Styling, Care & Custom Specialty Wheels Pontiac Wheels

"Powerful 7.4 Amp motor provides power for a hard–hitting 2.5ft.–lbs. of energy per blowVariable speed: 0–980 RPM; 0–4200 BPM11/8in. solid bit capacity, 31/2in. thin wall core bit capacity in concrete or 4in.capacity in masonry blockTool can be used for drilling in steel, wood or concreteThree modes of operation: rotation with hammering, hammer–only and rotation–onlySpeed control switch allows operator controlled starts for less bit walk resulting in more accurate hole positioningSlip clutch stops rotary action when a bit jams, protecting mechanism from overloadD–style rear handle provides a secure, comfortable gripTwo–finger speed control trigger switchGrounded, 3–wire cordLightweight, compact 14in. length and well–balanced designIncludes impact resistant carrying case, side handle, and depth gaugeModel 5359–21U.S.A."
Manufacturer: Milwaukee
SKU: M0133
Category: Power Tools

"Special tractor-treaddesign resists slide-out. Improves bite stability and handling in snow, mud and sand. Tubeless. 4-ply nylon resists punctures and abrasions. Size: 25 x 13-9 Maximum Load: 415 Lbs."
Manufacturer: Tireco
SKU: 13507
Category: Tires + Wheels

"Super-duty segmented blade with a hard bond is designed for cutting asphalt,green concrete, lightweight block and other soft abrasive materials. 12in. dia. x .125W x 1in.-20mm arborUse this quality blade with low HP walk-behind saws, cutoff saws and table saws"
Manufacturer: National Diamond
SKU: 1555863
Category: Abrasives

"Magnesium frame, noseplate and handles make truck extremely lightweight. Fully welded frame and handles provide maximum strength and durability. Hasauto–rewind ratchet system with 2–pc. belt, continuous belt stair climber and 6in. x 2in aluminum wheels with mold–on rubber tires. Measures 24in.W x 59in.H. U.S.A."
Manufacturer: Wesco
SKU: 144322
Category: Material Handling

VibratoryTumblers offer thorough, gentle cleaning - Automatically - Now you can thoroughly clean and polish small pieces and hardware without the risk of getting them "launched" by a wire wheel. Gentle vibratory tumbling action with the Green Rust Cutting Media removes rust from nuts and bolts without rounding edges. Simply stop the tumbler when parts are de-rusted. A brilliant luster can then be achieved by using the Dry Shine Media. The vibratory action works more quickly than a rotating tumbler. The Vibratory Tumbler System includes 8 & 10" bowls, 2# of each media and detailed instructs.
SKU: 43204
Category: Metal Buffing & Finishing Buffing Motors / Accessories

"Designed for use with any medium not corrosive to stainless steel. Stainless steel movement with 316 stainless steel Bourdon tube. 1/4 MNPT 316 stainless connection. 304 stainless steel case. Grade B accuracy. Black enameled aluminum pointer, whitealuminum dial and polycarbonate window. Glycerin filled. Range (PSI) 0-10,000"
Manufacturer: Valley Instruments
SKU: 53788
Category: Gauges

"Hobarts STICKMATE models are the top performers in their class. The LX 235 AC has up to 235amps output. With the Accu-Set infinite amperage control, weld time increases up to 100% with decreased output. 3-year limited warranty. 1/2 in. weld thic"
Manufacturer: Hobart
SKU: 164668
Category: Welding

"King Kutters XB Finish Mower is built with the quality and features that will make your lawn the envy of the neighborhood. Mowing has never been easier because of the free-floating flex hitch system, which allows the mower to follow the contourof the ground, mowing evenly on uneven terrain. Truck ship. U.S.A. Unique free-floating flex hitch system allows mower to follow the contour of the ground3/16in. reinforced steel deckHeavy-duty 40 HP cast iron gearboxSingle belt with EZ adjustment system4-ply pneumatic turf tiresShielded PTO shaft with shear pinAntiscalp roller; fully baffled deck1/4in. thick heat-treated bladesEasy height adjustmentTruck shipU.S.A.Model FM-48-XB"
Manufacturer: King Kutter
SKU: 256006
Category: Ag Equipment + Excavating

"The perfect clamp where multiple clamps need to be set up and taken down quickly, and where vibration causes conventional clamps to (walk.) The Rapid Action Lever Clamp stays firmly inplace when using power tools. Ideal for high–volume produ"
Manufacturer: Bessey
SKU: 15101016
Category: Hand Tools

"Quick plug trailer light connectors are easy to install. Heavy duty connectors convert from round to flat, pin to flator round to round. U.S.A. Adapts From: 7-Way Round Adapts To: 4-Wire Flat"
Manufacturer: Northern Tool and Equipment
SKU: 637355
Category: Trailers + Trailer Parts

"For 1 3/4in. widesprings. You get 4 U-bolts, nuts and 2 spring plates. For Axle Weight: 3500 Lbs. Fits Axle: 2 3/8in."
Manufacturer: Reliable
SKU: 12581
Category: Trailers + Trailer Parts

Sparklescent- Unique blends of multiple effects colors that createsingle stage "candied" custom finish color. Apply over a white base.
SKU: 34516 001
Category: Auto Body Water Based Paint

"Waterproof, seamless molded seat has water drainage for all-weather use.Lever release lets you adjust seat forward or backward. Fold-up armrests, too. Seat is excellent for most industrial, commercial and farm equipment applications. Dimensions: A=20 inch W, B=22 3/4 inch D and C=21 3/4 inch H. Mounting patterns: 8 inch x 11 1/2Þ and 11 1/4 inch x 11 1/2 inch. Black. Made in U.S.A. Outside Diameter of Arm Rests: 24in."
Manufacturer: Northern Tool and Equipment
SKU: 1753
Category: Ag Equipment + Excavating

"Narrow width over the forks handles small pallets easily. Excellent 180° turning angle. Safety bypass valve helps protect against overload. Die-cast oil pump body decreases leak possibility. Non-marking, quiet PU steering wheels. 5500-lb. lift capacity. 3in. lowered fork height. 7 1/2in. totallift height. 21 5/8in. width over the forks. 45 1/4in. fork length. Truck ship."
Manufacturer: Northern Tool and Equipment
SKU: 143851
Category: Material Handling

"Increase your ATVs hauling capability with this 200–lb. capacity hitch hauler. Fits easily into a 2in. receiver hitch and features a mounting arm designed to provide extra ground clearance. Constructed of rust–resistant, black powder–coated square tubing with multiplewelded hooks for securing bungee cords. Can also be used with other vehicles with a 2in. receiver hitch."
Manufacturer: Northern Tool and Equipment
SKU: 47002
Category: Sporting Goods + Toys

"Super-soft, multi-color cloth cover is padded with heavy 32-oz. 100% cotton filler. Tough polypropylene bindingis double-stitched for long service. Size: 66in. x 76in."
Manufacturer: Northern Tool and Equipment
SKU: 14331
Category: Tarps + Covers

"Hose, wand and gun kit for pressure washers to 3000 PSI. Rear-entry pressure-washing gun has a 36in. wand thats insulated for your working comfort. U.S.A. Hi-lo nozzle holder Hardened stainless steel nozzle 3000 PSI hose has swivels and bend restrictors Quick-coupler for attaching to pump One year limited warranty"
Manufacturer: NorthStar
SKU: 15719721
Category: Pressure Washers

These silver face Liquid Filled gauges contain dampening fluid to ensure that the pointer stays put when the vehicle is pushed to the limit. Each gauge features the preferred 270deg "full sweep"dial design for enhanced visibility. Gauges include 1/8" & 1/4" NPT fittings, 6 ft. nylon tubing.
SKU: 74717
Category: Auto Accessories and Gifts

"Ideal outdoor protection for horses or livestock. Resistant to fire, termites and rot. 2in. x 3in. galvanized steel framing goes up quickly using patented “Slip-Fit” connections. Red siding, White roof and trim. Package includes framing system, steel roof and wall sheeting, trim, hardware andinstructions. Interior wood kick panels recommended (not included). Truck ship. U.S.A."
Manufacturer: VersaTube
SKU: 65465R
Category: Tarps + Covers

Protect your auto and help maintain its resale value with this custommolded third seat guards from Highland®. Durable thermoplastic is unaffected by most liquids such as gasoline and oil. Easy to install and remove for cleaning. Feature non-skid padding. U.S.A.
Manufacturer: Highland
SKU: 335913
Category: Automotive

"Low voltage, vacuum system protects up to 1/2 acre. Propane gas and air generate heat, moisture and carbon dioxide; combines with a special scent released through a time–released Octenol cartridge to attract annoying biting insectsHelps protect against infectious diseases carried by mosquitoesProtects up to 1/2 acrePowerful vacuum draws the pests into a convenient, removable catch tray where they dehydrate and dieExclusive catalytic converter uses a platinum catalyst that is safe, flameless and neverneeds replacingIncludes one Octenol cartridge, 36in. 2–section post mount, propane hose and regulator (20–lb. propane tank not included)14in.L x 10in.W x 14in.H; U.S.A."
Manufacturer: Flowtron
SKU: 168453
Category: Grounds Maintenance

"1/2 inch air impact wrench: 5CFM@90PSI3/8 inch air drill turns at 2500 RPM: 4CFM@90PSIHigh speed sander: 5CFM@60PSIDual action sander with 6 inch pad, 2 sanding discs and 3 backup flex discs: 5CFM@90PSIAir hammer has 4 chisels:4CFM@90PSIDie grinder: 5CFM@90PSIMolded case"
Manufacturer: Northern Industrial Tools
SKU: 158319
Category: Air Tools