3/8in. Dia. x 10ft. Hose with Molded Elbow @ Tools, Equipment & Painting online store

When split seconds count you only have a fraction of that time to monitor your instruments. Ultra-Lite Full Sweep electric gauges are designed for the professional racer. 270 degree dial face provides the ultimate in clear visibility when you need it most. Gauges have thefinest in high-end sending units for unsurpassed accuracy and dependability. They stand up to the pressure and you stay cool! Includes 1/8" NPT sender and 8' wiring harness.
SKU: 74670
Category: Performance & Tune-Up AutoMeter Ultra-Lite

All are specially formulated for top performance. All NorthStar©chemicals are biodegradable. Description: Dry Detergent Size: 7Lb. Bucket Feature: USDA Approved Makes Up To: 560 Gallons
Manufacturer: Northern Tool and Equipment
SKU: 22210
Category: Pressure Washers

"Tough instrument has heavy-duty extruded aluminum frame, V-groove edge and powerful full-length magnetic edge. 4 vials (plumb, level, 45°, vari-pitch) with 2 top-read windows. Lifetime limited warranty.U.S.A."
Manufacturer: Empire True Blue
SKU: 558685
Category: Measuring Tools

"Built tough for agricultural and industrial applications. 3000 PSI model is designed to withstand shock loads of up to 6000 PSI. Durable ductile iron cast components. 90 durometer O-ring seals with antiextrusion rings forpositive sealing throughout the cylinder. High tensile steel shaft is precision ground, polished and hard chrome-plated. Cylinder can be single or double acting. Attach one port for single and both ports for double acting. 30-month limited warranty. 3000 PSI2in. bore24in. stroke34 1/4in. closed pin center distance1 1/8in. shaft30-month limited warranty"
Manufacturer: Lion 3000
SKU: 992025
Category: Hydraulics

The Replacement Deflector for the HotCoat PRO gun can be turned tochange from verticle to a horizontal fan.
SKU: 58103
Category: HotCoat Powder Coating Powder Coating Equipment Powder Coating Accessories

"This powerful 8.0 amp drill has the construction and performance to eliminate any other 1/2in. drill in its category. This heavy duty Magnum® drill is built for industrial/construction applications. It features raw power with a Milwaukee built 5.5 amp motor, 0-850 rpm. Another exclusive feature is the brush cartridge system, with a set of spare brushes, that allows you to change brushes in less than one minute. Use this tool to drill into wood, metal, plastics and composites. Powerful 8.0 Amp Milwaukee motorAll metal Grip-Lok™ single-sleeve chuckVariablespeed control; 0-850 RPMAll metal gear case and diaphragm 8ft. 3-wire Quik-Lok® rubber cord360° locking side handleComfortable tactile grip and 2-finger triggerModel 0302-20U.S.A."
Manufacturer: Milwaukee
SKU: M0018
Category: Power Tools

Straight-handle style with point tip for precise soldering. 4 1/2-ft. cord with 3-prong plug. Metal stand holds ironwhen not in use. 110 Volts; UL approved.
Manufacturer: Northern Industrial Tools
SKU: 110700
Category: Welding

"Package includes: Marco® 6.0 cu. ft. BlastMachine with remotes installedDurable powder-coated finishASME code pressure vessel4in. fill port for loading of abrasiveHeavy-duty handle for moving ease1 1/2 in. I.D. pusher lineLifting eyesMuffler - easy to clean out/repairDurable 16in. tires and rim setLarge footprint for stability50ft. of 1in. coupled blast hose#5 nozzleMB30 Media Blast Abrasive Blasting Respirator, waist length nylon cape and 50 ft. of breathing line2-outlet airline filterMoisture separator with fittingsU.S.A.Factory shipped"
Manufacturer: Marco
SKU: 155361
Category: Sandblasters

This unique liquid polish really removes haziness, halos, discoloration from UV damage and hairline scratches from plastic rear windows on convertibles. Contains no fillers or cover-ups that cause yellowing.The 8 oz. bottle of concentrated formula contains sufficient polish to do several jobs. Use with a natural wool buffing pad on your drill, polisher or power buffer at 2,400 to 3,500 rpm.
SKU: 40000
Category: Styling, Care & Custom Car Care & Protection Cleaning & Polishing

"Polyvinyl 3in. “V” bow stop is long lasting, fade resistant and will not mark or mar yourboat. Black. U.S.A."
Manufacturer: Tie Down
SKU: 451047
Category: Trailers + Trailer Parts

"Powerful 10 Amp motor18,000 RPM no loadAll ball–bearing constructionPlunging action for greater versatility2 1¬2in plunge distanceClear–view shielddepth adjustmentAccepts 3bit shank sizes"
Manufacturer: Northern Tool and Equipment
SKU: 189639
Category: Clearance

Heavy duty industrial/ag jack capacity. Rolled acme threads and steel anti-friction thrust bearings provide smooth cranking and long jack life. Zinc plated construction resists corrosion. No painting needed. U.S.A. Lift (Travel): 12in.Capacity: 1000 Lbs.High strength triangular steel mounting brackets provide easy weld on or bolt on mounting7in. retracted21.5in. extended1.88in. O.D. tube diameterHoles in triangular mounting are 3in. apartHeight whenclosed: 20in.Handle length: 6in.Mounting hardware and jack foot not includedJack is a weld on.
Manufacturer: Bulldog
SKU: 12732
Category: Automotive

"Easy, convenient and quick to use. 1 1/4in. x 4in. high quality forkliftforks comply with all ITA requirements. Truck ship. U.S.A."
Manufacturer: Atlas
SKU: 103972
Category: Material Handling

"The Lift–Mate is designed to be used with HI–LIFT 3 1¬2–ton mechanical jacks, Item#s 1442 and 14421. Plasticbumpers are no longer a problem — the Lift–Mate gives you a lift point directly from the wheel, reducing the amount of travel up the jack bar needed to lift wheel to a safe height or to position a jack stand beneath the chassis. Can be used with almost any truck or SUV. 5000–lb. lifting capacity. A rubber pad eliminates scratches and scrapes to the wheel and tire. Rubber–coated hooks protect the wheel. U.S.A."
Manufacturer: Hi-Lift
SKU: 144215
Category: Automotive

"Machine can be offset to either side or centered. A-frame extended for smooth operation. 2 disc torque limiter protects tractor and implement. Removable tine shaft. Heavy duty all gear drive, adjustable skid shoes, suggested use with 25-50 HP. 540 RPM at PTO shaft, 75 HP gear box. 28 13 1/4 in. L by 5/16 in. x 2 1/2 in. W blades,rotor speed of 210 RPM. Digs 7 in. to 10 in. deep. Works with category 1 tractors. Truck Ship. U.S.A. A-frame and gearbox assembly can be reversed54 inches3-PointClutch, side shift28 blades"
Manufacturer: Howse
SKU: 250188
Category: Ag Equipment + Excavating

Sold in cartons of 48. U.S.A. 3 1/4in. x 1 3/4in.x 3in. Blue
Manufacturer: Quantum
SKU: 278513B
Category: Storage

"Discs ideal for cleaning, conditioning, light deburring, blending and more. Speedlok feature - also compatible with 3M Roloc™. Can also be used to remove light rust, oxidation and scratches. U.S.A. Size: 3in. Grit: CoarseQuantity: 5"
Manufacturer: Norton
SKU: 1599763
Category: Abrasives

"Portable system is ideal for servicing equipment in the field. Perfect for contractors, landscapers, rental equipment operators andfarmers. Built-in baffle controls splashing when moving on rough terrain. Portable gas containers are for ground use only. Not transportable for refilling. Comes with a 4ft. 1/2in. discharge hose. U.S.A."
Manufacturer: Todd
SKU: 33648
Category: Fuel Transfer + Lubrication

Two 6 3/8in. and two 11in. C-clamps adjust from 0 to 2in. or 0 to 3 3/4in. PLUS straight-jaw 10in.locking pliers. One year limited warranty.
Manufacturer: American Tool
SKU: 15235
Category: Welding

"Low-maintenance diesel engine is compact, lightweight, durable, fuel-efficient and extremely quiet. Features electric starting, dry-type air cleaner, serviceable muffler and tip-over leak protection. Model 1B30XES-9904Horizontal 1in. x 2.84in. shaft3/16in. keyway7 HP dieselAir cooled, 1-cylinder, 4-stroke, direct injection engineDie cast forged crankcaseLight alloy cylinder headLight alloy pistonPressurized lubricationUses 50% less fuel than comparable gas enginesDry air filter and oil drain on bothsides of engineElectric start with recoil backupExcellent cold start performance1.32 gal. fuel tank2-year limited warrantyTruck ship"
Manufacturer: Hatz Diesel
SKU: 606720
Category: Engines

"Powerful multi-purpose suction lifter Great for carrying marble or other smooth construction materialsDual fix grip structure, high density aluminum alloy"
Manufacturer: Northern Tool and Equipment
SKU: 144760
Category: Automotive

This kit is for a 1969 Charger 500 and contains Bumble BeeStripe Kit (with '500' cutout), squeegee and instructions. Decal color is black.
SKU: 10799 001
Category: Styling, Care & Custom Phoenix Graphix Dodge

"Can be used in workshops, cubicals, workstations, anywhere space islimited. 90° tilt offers optimum air flow. All-metal construction."
Manufacturer: FlowPro
SKU: 250683
Category: Shop Supplies

All tires come with ball bearings and white finished wheels. Hub Bore: 5/8in. Hub Size: 3in. Tire Size: 480 x 8 O.D.: 15.5in.
Manufacturer: Northern Tool and Equipment
SKU: 12100
Category: Tires + Wheels

"Sturdily manufactured from high carbon steel, these heavy-duty tongs are designed to grab hold of poles and logs for skidding and dragging operations.5/8in. ring size. 4 1/2in. to 25in. jaw opening width."
Manufacturer: Northern Industrial Tools
SKU: 19795
Category: Logging

"This system features four individual panels filled with tip out bins. Two are fixed to the back side of thesystem and two slide easily from left to right allowing free access to all four panels. Manufactured of tough 14-gauge steel with a powder-coat finish, the overall unit measures 16in. D x 48in. W x 67in. H. Bins are available. U.S.A. Number of Bins 56 Gray"
Manufacturer: Quantum
SKU: 278580G
Category: Storage

"National Pipe Tapered Thread fittings for fuels. Rated up to 10,000 PSI. U.S.A. Size: 1/4in. FNPTF"
Manufacturer: Buyers
SKU: 51CTF004
Category: Hydraulics

Sealed inside this heavy duty bowl is a 44 Watt heating element that keeps food or water warm for your 4-footed friend. Rugged polypropylenebowl is 12in. x 12in. x 4 3/8in.H. Holds 6 quarts. Will not rust. Automatic thermostat runs heater only when necessary. Anti-chew spring guard helps protect the 5-ft. supply cord and your pet.
Manufacturer: Northern Tool and Equipment
SKU: 3468
Category: Outdoors

This is the Stand for the Machinists benchlathe which takes just 37 1/2in. x 19 3/4in. of floor space.
Manufacturer: Northern Tool and Equipment
SKU: 143359
Category: Metal Fabrication

Save time, money and materials with "PDR" - Paintless Dent Repair. Minor dents and hail damage are easily removed. This 4 piece kit will get you started making your own repairs. Requires special light source to "read" surface irregularities like the Dentool Shop Lighting System (31238). This4 piece set includes 1 rod, 1 tweaker, 2 hand tools. set of hooks, and set of punches. Made in the USA. Limited lifetime manufacturer's warranty.
SKU: 31236
Category: Auto Body Body & Fender Dent Repair Kits

Aerator with black float ring produces a crown of foam at the surface while generating oxygen. Includes a 50–ft. power cord and two 50–ft. blackanchoring ropes. 2–year limited warranty. U.S.A. Factory shipped. 3/4 HP6.7 Amps @ 120V2.2lb. oxygen transfer per hour
Manufacturer: Kasco
SKU: 108704
Category: Outdoors

All HotCoat Powders are exclusively formulated for the HotCoat System. They are optimized to promote static charge for uniform coverage and finish. All are UV and fuel resistant. Packed in 8 oz. net wt.cans.
SKU: 10092
Category: HotCoat Powder Coating Powders Hi-Tech Colors

"Molded poly fenders are incredibly durable. Uneffected by temperature extremes. Wont rust, ever. Step pads on tpp and both sides hold up to 300 Lbs. Insideskirt keeps dirt and debris away from trailer. Built-in mounting slots for easy installation. White. U.S.A. Tire Size: 12in.L x W x H: 33 1/2in. x 7 1/2in. x 8 3/4in."
Manufacturer: Wesbar
SKU: 12603
Category: Trailers + Trailer Parts

"Powerful, long-lasting GeneracOHVI® engine packs an 22,500 Watt surge and delivers 15,000 continuous Watts for hours thanks to a 16-gallon tank. Air-cooled engine features electric start, full-pressure lubrication, spin-style oil filter and life rated for 3000+ hours. 2 year limited warranty. EPA and CARB certified. Designed for industrial, commercial or residential use 125 Amps at 120 Volts 62.5 Amps at 240 Volts 2 120 Volt 20 Amp outlets with GFCI 2 120 Volt 20 Amp outlets 2 120 Volt 30 Amp Twistlock outlets 1 120/240 Volt 30 Amp Twistlock outlet 1 240 Volt 50 Amp outlet 1 12 Volt dc 10 Amp outlet Battery Pneumatic wheel kit"
Manufacturer: Generac Power Systems
SKU: 168198
Category: Generators

Interchangeable with other couplings and adapters. Manufactured from glass reinforced polypropylene.1in.
Manufacturer: Northern Tool and Equipment
SKU: 5630
Category: Water Pumps

Precisely measuring the ability of an engine cylinder to hold air pressure supplements the compression gauge as a diagnostic tool and allow for pinpointing of bad valves, worn rings, cracked cylinder walls, and blown head gaskets. Includes dual impact-protected gauges, precision regulator with a M14 and M18 adaptor and a 26" hose assembly. Supplied in hinged storage case.One year manufacturers' warranty. Made in USA.
SKU: 46265
Category: Performance & Tune-Up Electrical & Diagnostic Diagnostic Testers

"Not for lifting applications.Weld on to your application. U.S.A. 1in. Ring Diameter 2 1/8in. x 3/8in. Bracket Size Ring I.D. 3in. x 3in. Working Capacity 15,586lbs."
Manufacturer: Buyers
SKU: 127288
Category: Trailers + Trailer Parts

"Cover features triple-layer polypropylene top and rugged polypropylene sides. Fullheight zippered access panels allow complete access to door, sides and rear. Adjustable front and rear tension panels provide a custom fit. Air vents reduce wind lofting and inside moisture. Includes storage bag, rear ladder cap and tie-down rope. Elasticized corners for fast and easy fitting. 3-layer polypropylenetop repels rain and snow, yet vents inside water vapor out. Prevents mold, mildew and ice buildup. 3-year limited warranty. Fits 18ft. to 20ft. RVTriple-layer polypropylene top and polypropylene sidesFullheight zippered access panelsElasticized cornersAir ventsIncludes storage bag, rear ladder cap and tie-down rope"
Manufacturer: Classic
SKU: 453026
Category: Tarps + Covers

"Air drill features a lightweight, compact aluminum housing and reversible motor with quick-release lever. Variable-speed trigger for precise speed control. 1/2in. keyless chuck4 CFM air consumption500 RPM1/4"" air inlet99.1dBnoise levelModel IR7803RAKC"
Manufacturer: Ingersoll Rand
SKU: 154405
Category: Air Tools

"Attaches to our telescoping wands Item#’s 22812,22818,22824 and 227024 for quick and easy cleaning of walls, roofs, pool decks, trailer walls and more. Maximum temperature150°F. Includes two 15° nozzles. Telescoping wand not included. Clean faster and save time! For use with maximum 3000 PSI, 2.6 GPM pressure washers"
Manufacturer: NorthStar
SKU: 157623
Category: Pressure Washers

Features large 30in. turntable with 40in. working height. All stainlees steel cabinet. Includes high volume 3HP pump with stainless steelimpeller. 9.0 KW heater with 0-60 minute cycle timer and stainless steel gasket free front door. 85 gallon capacity. 11 1/2in. stainless steel disk skimmer with 500lb. capacity. Low liquid sensor deactivates heaters to avoid damage. Durable friction turntable wont break if a small part gets lodged. KT model#9600SS Uses our water based solvent Item# 3874. Truck Ship.
Manufacturer: Kleentec
SKU: 38797
Category: Parts Washers

"A non–metallic blend used to permanently color the surface of freshly placed concrete usingthe shake–on or broadcast method. Formulated to produce uniform, consistent color. Designed to be used alone or with BonWay True Color Release Agent when imprinting concrete with texture mats. Available in a 5–gallon pail that contains 63 lbs. of material. Coverage requirements vary according to the color selected and intended use. Hardener should be applied at a rate of 60 lbs. per 100 sq. ft. Lighter or pastel colors may require as a much as 100 lbs. per 100 sq. ft. U.S.A. Factory shipped. Slate Green"
Manufacturer: BonWay
SKU: 999823
Category: Construction

"Ruggedtextile garage boxes organize any garage. Handy organizer system folds down, stores items, then folds down when not needed. 2 small storage boxes Four fit on one shelfWorks with (Item#s 79500, 79501 and 79502)Measures 6.5in. x 6.5in. x 13in."
Manufacturer: Classic
SKU: 79503
Category: Storage

Fluid level gauge mounts on side wall of reservoirs upto «in. wall thickness. Metal cover protects gauge from damage. Includes thermometer. Mounts with hollow «in.-13 bolts on 5in. centers. 6.5in.H x 1.5in.W x 2.2in.D.
Manufacturer: Buyers
SKU: 4066
Category: Hydraulics

"Totally forgedfor excellent grain structure without the built-in stress. Black powder-coated finish. Pins are yellow zinc dichromate plated. U.S.A. Twisted Type Pin Size 3/4in. x 1/2in. Working Load 12,000 lbs."
Manufacturer: Northern Tool and Equipment
SKU: 318016
Category: Towing

"Steel caster has a 2in. urethane wheel. 5/16in. diameter, 1/2in. post is threaded 18 per inch.Creeper connector nut included. Capacity: 150 Lb."
Manufacturer: Fairbanks
SKU: 18899
Category: Casters

Ideal for health and foodservice industries. Extremely corrosion-resistant wheels are easy to clean and non-marking. 1 3/4in. and 2 7/8in. to 3in. bolt holespacing. U.S.A. Wheel Size: 3in. x 1 1/4in. Mount Height: 4 3/8in. Capacity: 150 Lbs. Bolt Pattern: 1 3/4in. x 2 7/8in. Wheel Type: Rigid Thermoplastic/Rubber Wheels
Manufacturer: Fairbanks
SKU: 189600
Category: Casters

"Model OHH50-68115F5 HPHorizontal shaft; dimensions: 3/4in. x 2-3/8in. end tapped 5/16in.-24 with 3/16in. keyway, #2 extended camApproximate mounting base dimensions:6-3/8in. x 3-1/8in.Flange mount bolt circle diameter: 3-5/8in.Overall engine dimensions: 12.3in.D x 15.7in.W x 14.5in.HCarb side exhaust; muffler guardDurable cast iron cylinder sleeve and flywheelRecoil start; solid state ignition Mechanical governor; float carburetorRemote throttle controlApplication: tillersNote: This engine is not a replacement engine for snow throwers2 year limited warranty"
Manufacturer: Tecumseh
SKU: 60517
Category: Engines

New High-Tech Titanium Finish: TiCoat47 adds a hi-tech look. Dress up engine, suspension, transmission, and brake components. TiCoat47 is an acrylic enamel formulated to offer durablity with fuel and heat resistant to 300 degrees F. Suitable for most underhoodcomponents except exhaust manifolds and headers. Natural 20-30% gloss Satin Finish resembles pure titanium metal. One 12 oz net wt. can covers 6 sq.ft.
SKU: 34127Z
Category: Specialty Coatings Detail Coatings Metal Finishes

Open & box endsfrom 1/4in. to 1 1/4in. by 16ths. Includes Plastic Pouch 12 Point
Manufacturer: Northern Tool and Equipment
SKU: 150252
Category: Hand Tools

Special galvanizing process allows paint toadhere to these 16-gauge steel fenders. High quality flat-top round style in popular sizes. U.S.A. Fits Wheel: 14 and 15in. Length: 31in. Width: 9in. Height: 13in.
Manufacturer: Shipshape
SKU: 1268
Category: Trailers + Trailer Parts

"Exclusive auto grip lock automatically locks the grip jaws closed. Even over rough terrain, the drum handler maintains a positive lock.Ergonomic design allows drums to be raised to 20in. above the floor. Swivel casters for maneuverability and floor lock for safe use. 37in. L x 41in. W with legs extended and 34.5in. L x 36in. W with legs retracted. 48in. H. Truck ship. U.S.A."
Manufacturer: Wesco
SKU: 144176
Category: Material Handling

Use on the suction sideof the pump to protect the impellers. Strainer Size: 2in.
Manufacturer: Pacer
SKU: 10886
Category: Water Pumps

Auto gage(R) puts the power of performance in your dash with these bold 270deg "full sweep" instruments, giving you maximum visibility under the most demanding conditions. All of the individual gauges include an optional chrome plated bezel that snapson to add sparkle if desired. The Voltmeter reads from 10-16 volts (Electric).
SKU: 74221
Category: Performance & Tune-Up AutoMeter Auto Gauge

"Heavy–duty, water–resistant fabric protects against sun damage, rain/snow, dirt, dust, tree sap and birds; will not shrink or stretch. Elastic shock cord in bottom hem for a quick, custom–like fit. Click–it closure on back foreasy removal. Handy integrated stuff sack. Fits models up to 33 gallonsBlack"
Manufacturer: Classic
SKU: 45910
Category: Tarps + Covers

Mag Wheel Tapered Buff with Mandrel - This 2" wide by 2" long tapered mag wheel/goblet buff includes it's own attached 1/4" mandrel. Commonly used with Tripoli (13135), Stainless (13136) or White Rouge(13001) compound.
SKU: 13208
Category: Metal Buffing & Finishing Buffing Buffs

Standard Cobra Torch Kit - Welds Like a TIG, Cuts Like a Plasma Cutter - With the Henrob 2000 from Cobra Torches just change the tip and you can do either. This oxy-acetylene is the best of both worlds. From the most delicate aluminum to plate steel over 1/2" thick, while operating at only 4 psi. Used and recommended by many of the most renowned metal workers andfabricators. Includes case and instructional video. Lifetime manufacturer's warranty. Made in the USA.
SKU: 19128
Category: Metal Shop Welding Welders

"Now you can reach those awkward spots with your impact wrench to get the job done faster! Extra heavy dutyimpact sockets swivel on universal joints. Rugged, heavy duty treated black chrome vanadium steel with tough industrial finish. Standard 6-point design. Sizes: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 and 13/16in.. With steel case."
Manufacturer: Northern Industrial Tools
SKU: 14679
Category: Air Tools

"1/2in. impact wrench with composite housing (Model IR2310)9500 RPM free speed600 ft.-lbs.torque4.4 CFM average air consumptionForward and reverse capabilityMultiposition power management5-pc. SAE socket set: 1/2in., 9/16in., 5/8in., 3/4in. and 7/8in.Pair IR mechanics glovesHeavy-duty impact-resistant carry caseModel 2310K"
Manufacturer: Ingersoll Rand
SKU: 158370
Category: Air Tools

Kit contains 1 Front header panel stripe, 2 Front fender front stripes, 2 Front fender rear stripes, 2 Door stripes,2 Rear quarter panel front stripes, 2 Rear quarter panel rear stripes, squeegee and instructions. Decal color is black.
SKU: 10715 001
Category: Styling, Care & Custom Phoenix Graphix Chevrolet

"Send and receive crisp video and stereo audio with any of your existing audio/video devices: camera, DVD, VCR,cable, CD player, speakers, etc. Up to 300 feet of wireless transmission. Three separate channels allow for three transmitters and an unlimited number of receivers. Infrared sensors allow for use of your remote control devices. Includes power adapters and RCA cable."
Manufacturer: First Alert
SKU: 971940
Category: Safety

"Brass movement with C shaped Bourdon tube up to 600 PSI. Helical over 600 PSI. 1/8 NPT male connection. For use with air, gas, oil or water. Black enameled aluminum pointer, white aluminum dial and temperature compensating polycarbonate window. Glycerin filled to dampen pulse and vibration. Accuracy: ASME/ANSI B40.1 Grade A (2-1-2%) Range PSI: 0-600"
Manufacturer: Northern Tool and Equipment
SKU: 53727
Category: Gauges

Mount these 13in. rubber rollers on top or beneath the frame for added adjustment. Hot-dip galvanized mounting brackets adjust forwidths up to 13in. on each side and fit frames up to 3in. x 4in. Sold in pairs. Includes hardware. U.S.A.
Manufacturer: Tie Down
SKU: 451037
Category: Trailers + Trailer Parts

12 pt. SuperKrome® wrenches 8-22mm. Includes SureGrip® wrench rack. SK 86265 U.S.A.
SKU: 1517210
Category: Hand Tools