EW Miniature Ball Pein Hammer @ Tools, Equipment & Painting online store

Lightweight 460 Ford Long Block - This engine will never run, but it sure makes a great display and works well for anyone setting up a street rod or race car chassis for motor and transmission mounts, steering and header clearances, and more. This authentic plastic reproduction weighs less than24 lbs. Think of the time you'll save using this lightweight compared to a cast iron original! This long block (with heads attached) incorporates metal threaded inserts to bolt on headers, intakes, valve covers, timing cover, water pump, engine mounts and oil pan.
SKU: 46203
Category: Performance & Tune-Up Drivetrain Engine Tools

"Really tough! Injection molded from high density polyethylene, these big bins have extra heavy, double-thick walls that allow you to stack up to 200 pounds of tools, merchandise, parts and other cargo. Hopper front allows easy access. Bins can withstand temps ranging from -40°F to +250°F. Not affected by water, chemicals or solvents. U.S.A. Bin Size 19 3/4in. x 12 3/8in. x 11 7/8in. Yellow"
Manufacturer: Quantum
SKU: 178402Y
Category: Storage

"Truxedo is an all-climate, soft roll-up tonneau cover for pickups. Black vinyl-coated, leather-grain fabric is the strongest in theindustry. Kits are preassembled and easily installed in about 20 minutes. Side rails mount to the inside lip of the truck b"
Manufacturer: Truxedo
SKU: 359601
Category: Automotive

"For connecting generator output receptacles and either Reliance Raintight™ power inlet box or transfer switches with appropriate power inlets. Fourconductor 120/240 Volt. Sturdy, all–weather construction. UL listed. 5–year limited warranty. U.S.A. 40 ft. length20 Amps5000 Generator Watt L14–20 Twistlock plug/connector"
Manufacturer: Reliance Controls
SKU: 100013
Category: Generators

Standardwith EPDM gaskets. Interchangeable with other couplings and adapters. Manufactured from glass reinforced polypropylene. 1 1/4 in. x 1 in.
Manufacturer: Norwesco
SKU: 56720
Category: Water Pumps

"Replace worn-out corrugated bins permanently with these tough, durable, high density plastic bins. Quantum Shelf Bins are the industry standard for quality. These durable polyethylene bins feature a molded in label holder, built-in rear hanglock which allows bins totilt out for complete access. A wide hopper front allows complete access to contents. Edges are reinforced for added strength. They are designed for 12in., 18in. and 24in. deep shelf units, racks or standard shelves. Bins are waterproof, impervious to most chemicals and unaffected by grease or oil. Sold in cartons only. U.S.A. 17 7/8in. x 6 5/8in. x 4in. Ivory"
Manufacturer: Quantum
SKU: 278506I
Category: Storage

"Light charges during the day and gives 8 hours of colorful light at night. Perfect for pools, ponds or tables. Powered by a rechargeable battery. 5.9in. round x3.6in. high. Amber"
Manufacturer: Northern Tool and Equipment
SKU: 25700
Category: Clearance

"7/8in. x 3 5/32in.; 3/8in.-24 tapped end Recoil start 8in. approx. mounting base dimensions Aluminum cylinder bore Magnetron® electronic ignition Muffler and exhaust manifold included Model 123K02-0015-E190-day commercial, 2-year consumer limited warranty; U.S.A."
Manufacturer: Briggs & Stratton
SKU: 7065
Category: Engines

"2 in 1 air tool. Head rotates 360° for ease of operation. 1) Crimp 7340;flange) up to 14 gauge material together, then turn the head 180° to: 2) Punch a clean 3/16in. hole for your welding operation or sheet metal fasteners. 10in. long, 2in. diameter. 90 PS."
Manufacturer: Northern Industrial Air Tools
SKU: 15826
Category: Air Tools

"Ideal for cutting ferrous metals 3/16in. or less. Rake angle designed to reduce vibration for smooth, fast, quietcuts while reducing heat and sparks plus prolongs blade life. 14in. blade with 72 TPICarbide-tipped metal"
Manufacturer: Milwaukee
SKU: M0514
Category: Power Tools

"Nylon glove is made with a suede palm for better grip. Has mesh backfor comfort and breathability. Matching color protective padding on the back. Yellow, size Medium."
Manufacturer: Northern Tool and Equipment
SKU: 135922
Category: Gloves + Apparel

"Each set of leaf springs includes: two 1 3/4in. wide springs with 9/16in. double eyelets. 27in. eye center. When using one axle, order one set of springs to the correct capacity and one shackle set. With tandem axles, order two sets of correct capacity springs and one tandem shackle set. Always replace springs inpairs. U.S.A. Capacity/pr.: 1500 Lbs. Leaves: 3 Leaf Thickness: .323in."
Manufacturer: Northern Tool and Equipment
SKU: 12521
Category: Trailers + Trailer Parts

Adapts JIC 37 degree tube to SAE straight thread O-ring boss-style fittings. U.S.A. Size: 1/4in. M JIC37 x 3/8in. M STOR
Manufacturer: Buyers
SKU: 51GSM046
Category: Hydraulics

"Fits Ramsey Patriot 9500 (#s 144190, 144192), Patriot 15,000 (#s144191 and 144193), REP 8000e (#14415), REP 5000 (#14410), REP 8000 (#14413), REP 9000 (#14406), QuickMount 5000 (#143160) and QuickMount 8000 (#143506) series winches. Sierra WraparoundSleek “European” design contours to shape of vehicleMounts to vehicle frame without removingbumperWraparound styling offers full grille and headlight protectionInstallation rating: 3*Model 295937*The lower the number(1–5), the easier it is to install"
Manufacturer: Ramsey Winch
SKU: 149117
Category: Winches

Hilliard Extreme Duty Clutches Designed for up to 8 HP Engines. Thermodynamic Clutch Shoe design increasesthe clutch’s capacity to absorb heat and provide a longer service life. Made in USA.
Manufacturer: Hilliard
SKU: 13792
Category: "Go-Karts, Mini-Bikes + Scooters"

"Premium CAT direct drive pump. Magnetek single-phase motor. Adjustable temperature up to 250°F steam. Pressure washers come with safety relief valve, thermal protection and 50ft. of yellow, non-marking hose for extra reach. Tires are12in. pneumatic. Truck Ship. U.S.A. Pressure (PSI): 1000Temp: 250°F SteamFlow (GPM): 2.0Motor: 1.5 HPPower: 115 Volt, draws 20 AmpsPump: Cat 2SFDrive: DirectGun: Industrial rear entry 4000 PSINozzle Type: Dual lance with quick connect 0°,15°,25°,40° steam nozzleHose: 3/8in. x 50ft. quick couplers, non-marking rubberCart: Upright with wheelsExtras: Adjustable pressure, Chemical Injector, Thermal protector, Adjustable Temp, 8.25 gallon diesel tank"
Manufacturer: NorthStar
SKU: 157322
Category: Pressure Washers

Black Heavy Duty Anti Rust is the same rust stopping formulation as our original amber 16018Z Heavy Duty Anti Rust. Black Heavy Duty Anti Rust produces a satin black waxey oiley finish that looks great on frame and suspension parts. One 13.5 oz. net wt. includesa fan and spot spray nozzle and 3" extension.
SKU: 16031 Z
Category: Rust Treatment Rust Prevention Bare Metal Coatings

"Quality chrome vanadium steel with dipped handles. Set of 6 1/2in. pliers includes long nose, diagonal cutter, end nipper and bent nose.Limited lifetime warranty. Includes storage case."
Manufacturer: Northern Industrial Tools
SKU: 56250
Category: Hand Tools

"Production bender with horizontal and vertical positions allows accurate offset bends. One shoe bends 1/2in. to 2in. steel, 1/2in. to 2in. stainless steel and aluminum Rigid, IMC and EMT conduit. Also bends 1/2in. to 1 1/4in. PVC coated conduit. Fits all conduit sizes up to 2in. with no loose parts. Features automatic shut off forvoltage fluctuation protection and resetting circuit breaker. Hook attachment on pendant control frees hands while working. 47in. H x 33in. W x 43in. L. Truck ship. U.S.A."
Manufacturer: Northern Tool and Equipment
SKU: 967780
Category: Metal Fabrication

"Norton diamond blades offer many times the life expectancy and much faster cutting performance than standard abrasive blades, resulting in less downtime and overall cost savings. Blades feature laser welded diamond segments for long life and durability. Chopper brand is rated at 60 to 70 times the life expectancy of abrasive blades. Asphalt cutting blade 18in diameter; .125kerf Chopper blade type Wet blade"
Manufacturer: Norton
SKU: 169940
Category: Abrasives

Cotton twill cap has a built–in light beamthat angles in two positions. Operates on 2 AAA batteries (included). Size adjusts with hook and loop strap.
Manufacturer: Mossy Oak
SKU: 65000
Category: Gloves + Apparel

"5.5 HP OHV Honda engine with electronic ignition and oil alert. Recoil start for durable use. 2 7/16in. x 3/4in. horizontal shaft and 5/16in.-24 tapped end. Common applications are air compressors, generators, pumps, pressure washers, reel-type lawn mowers, go-karts, agricultural equipment, chipper/shredders, concrete saws, and small construction equipment.Model GX160K1QXC95.5 HPLow oil alertRecoil startTransistor ignitioncyclone air cleaner3.88 qt. fuel tank capacityHorizontal shaft3/4 x 2 7/16 shaft, 5/16-24 tapped end, 1/4 keywayApproximate mounting base dimensions of 6.38 in. x3.15 to 3.35" Flange mount bolt circle 3-5/8""
Manufacturer: Honda Engines
SKU: 60597
Category: Engines

"King Kutters single row “C” tine cultivator is the perfect cultivation tool fo the small farm orbackyard garden. Truck ship. U.S.A. High-quality spring steel “C” tinesReversible, heat-treated pointsAdjustable row widthsHeavy-duty angle frameCategory 1 hitchTruck shipU.S.A.Model CV-1-C"
Manufacturer: King Kutter
SKU: 256015
Category: Ag Equipment + Excavating

"Durable air pump with Geolast diaphragms and polypropylene manifolds, valve seats andelbow for transferring nonaggressive liquids, water-based liquids and slurries, windshield washer fluid, petroleum-based oil and ATF. Aluminum casing. Not recommended for synthetic motor oils. Pump has dry lift capacity of 15 feet. U.S.A. Aluminum casingAdjustable flow capacity: 0–17 GPMAir port inlet: 1/4in. FNPTAir port outlet:3/8in. FNPTFluid port width: 1/2in. NPSFMaximum solids: 1/8in.Dimensions: 11in. x 7 3/8in.D x 8 11/32in.HU.S.A."
Manufacturer: Lubeq Corp.
SKU: 1095714
Category: Fuel Transfer + Lubrication

"LowVib reduces vibrations and lowers fatigue. Strong, braided wire cable drive with lifetime warranty. Comes with easy loading T25 tap advance head. The E-TECH II engine combines high torque, reduced emissions and low noise with a superior power/weight ratio. Low weight and curved shaft for superiorcontrol. Air purge designed for very easy starting. Transparent fuel tank for easy fuel level control. The easy adjusting loop handle can be adjusted without tools. Engine: 28cc, 1.1 HPCut Width: 16in.Line Feed: Bump feedShaft Style: CurvedAttachment Compatible: NoVibration Reduction: LowVib TechnologyAdditional Features: Loop handle and solid trigger designWeight: 13 lbs.Model 125CU.S.A."
Manufacturer: Husqvarna
SKU: 195898
Category: Grounds Maintenance

20in. Loop Size 70 DriveLinks Chain Type 72DP 3/8in. Pitch .050 Gauge 7/32in. File Size
Manufacturer: Oregon
SKU: 72DP70
Category: Logging

18.4cubic foot container folds down for easy storage. 39in.L x 32in.W x 34in.H. Ships UPS and RPS.
Manufacturer: Northern Tool and Equipment
SKU: 143810
Category: Storage

"Dual 1/4in. SAE & 1/2in. Acme tee fitting for Freon® or R-134A cans. Works with any R-12 or R-134Amanifold set. 3-in-1 can tap: R-12, R-134A and oil can. Includes 2 can inserts: 1 for R-12 Freon 12-oz. cans, 1 for R-134A 2-oz. oil change cans. Fits US-made cans only. Refrigerant not included. U.S.A."
Manufacturer: CPS
SKU: 338502
Category: Automotive

Get a trailer mount in your favorite camo pattern. 4in. drop mountfeatures Mossy Oak New Breakup.
Manufacturer: Curt Manufacturing
SKU: 33087
Category: Towing

"Pick racks WITH bins, priced low! Rear “V” locks enables bins to be hung from shelf above when in use. Gray baked enamel finish steel racks will not rust or corrode. Parts bins aretough, yellow plastic. Large shelf bin units have a 350-lb. capacity per shelf. 22-gauge steel construction. Order 50-pack of dividers #178600 separately. U.S.A. Factory shipped. 36 Bins Bin Size 11 7/8in. x 11 1/8in. x 4in. Rack Size 12in. D x 36in. W x 75in.H Red"
Manufacturer: Quantum
SKU: 178497RED
Category: Storage

"Powered by a 5 HP Honda GC160 engine and features an 11 GPM, 2-stage Barnes pump delivering 3000 maximum PSI. Extra heavy-duty I-beam construction for maximum performance. Direct drive with flexible couplings. 4in. bore, 24in. stroke and automatic return valve. Quick 14 second cycle time. Comes fully assembledwith hydraulic oil. Truck ship. U.S.A."
Manufacturer: NorthStar
SKU: 1104
Category: Logging

"Designed for ultimate comfort and ideal for support in heavy–duty, dry industrial and commercial settings. PVC diamond–plate surface is chemical resistant and enhances traction. Thesponge base has a dense molecular structure that adds long–lasting ergonomic support and less strain on ankles, legs and back. Protects floors while shielding falling tools from damage. Mat is 9/16 in. thick, black with yellow borders and has all 4 sides beveled to reduce tripping hazards. U.S.A. Factory shipped. 75 ft.L x 3 ft.W"
Manufacturer: Northern Tool and Equipment
SKU: 171308
Category: Shop Supplies

"High-tech synthetic materials offer increased protection without losing dexterity. Ironclad gloves mold to your hands and wonÜt ever lose their shape, even after washing. Breathable anddurable, Ironclad gloves come in task-specific models to meet any challenge. All feature hook and loop cuff closures except for Cold Condition©, which has a high-performance neoprene cuff. Black/GraySize X-Large"
Manufacturer: Ironclad
SKU: 170500
Category: Gloves + Apparel

"Tie rod construction, double acting, heavy duty, high strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 2500 and bursting PSI is 5000. These name brand cylinders carry a 3 year warranty. Seal kits are available also. The 2in., 3in., 3 1/2in., 4in. and 4 1/2in. bore cylinders have 1/2in. working ports and 1in. pins. One exception is 909708 which has 1 1/4in. pins. The 5in.bore cylinders have 1 1/4in. pins which are included and 3/4in. working ports. Bore: 4in. Stroke: 10in. Closed Pin Center Distance: 20 1/4in. Shaft: 1 3/4in."
Manufacturer: Prince
SKU: 909410
Category: Hydraulics

Pack of 15 corrugatedbins to be used with our corrugated shelf bin units. U.S.A.
Manufacturer: Northern Tool and Equipment
SKU: 188505
Category: Storage

"With powerful Briggs & Stratton 5 HP engine Pumps up to 7200GPH, 200 head, 88 PSI max. Vertical lift 18 feet Self priming pump has 2in. NPT suction and discharge ports. Aluminum closed impeller; cast aluminum housing. Cast iron volute for long life. Built-in check valve; strainer eliminates clogging. EPDM gaskets and seals. U.S.A."
Manufacturer: Northern Tool and Equipment
SKU: 10998
Category: Water Pumps

Aerosol Spray Can Shelf - Constructed from heavy.090" brushed aluminum this 32-1/2"wall mounted rack provides a neat way to store up to 12 commonly used aerosols while lending a professional look to your garage or workshop. Made in the USA. For 8 can shelf, enter 43422 insearch box.
SKU: 43423
Category: Tools & Equipment Shop Equipment Storage

"Heavy duty ball mount fits a 2in. receiver. 1in. ball hole. Gross load 7500 lbs., tongue load 750 lbs.U.S.A. Maximum Lift 4 3/4in. Maximum Drop 6in. Shank Length 6 1/2in."
Manufacturer: Northern Tool and Equipment
SKU: 330433
Category: Towing

"Keep garage, shop or basement floors looking like new. Protective mat features rib construction to channel water and debris out and away from work area. Large 9ft. x 20ft. size. Durable nonslip material stays in place and wont absorb oil or antifreeze. Cleans easily with soap and water.In Brick Red. U.S.A."
Manufacturer: Northern Tool and Equipment
SKU: 67923BR
Category: Shop Supplies

"Includes 6in., 8in., 10in., 12in. and 16in.water pump pliers. Dipped handles for a secure grip. Lifetime limited warranty."
Manufacturer: Northern Industrial Tools
SKU: 111050
Category: Hand Tools

"Tool-box size grease gun is perfect for hard-to-reach places. Pistol-grip design allows for easy one-hand operation. Includes grease gun with rigid pipe and coupler, and one3-oz. multipurpose grease cartridge."
Manufacturer: Plews
SKU: 4036
Category: Fuel Transfer + Lubrication

"Cover features triple-layer polypropylene top and rugged polypropylene sides. Fullheight zippered access panels allow complete access todoor, sides and rear. Adjustable front and rear tension panels provide a custom fit. Air vents reduce wind lofting and inside moisture. Includes storage bag, rear ladder cap and tie-down rope. Elasticized corners for fast and easy fitting. 3-layer polypropylene top repels rain and snow, yet vents inside water vapor out. Prevents mold, mildew and ice buildup. 3-year limited warranty. Fits 22ft. to 24ft. travel trailerTriple-layer polypropylene top and polypropylene sidesFullheight zippered access panelsElasticized cornersAir ventsIncludes storage bag, rear ladder cap and tie-down rope"
Manufacturer: Classic
SKU: 453042
Category: Tarps + Covers

"Includes 14 industrial-quality metric DEEP WELL sockets in sizes 10 through 19mmplus 21, 22, 26 and 27mm. Metal box."
Manufacturer: Ingersoll Rand
SKU: 158444
Category: Air Tools

"Diamond Sof–Tred floor mats have a revolutionary PVC sponge compound that reduces fatigue and discomfort from standing for extended periods. Tough Dyna–Shield barrier resists wear, extending service life. Protects floors while shielding falling tools from damage. Diamond–plate design mat is 1/2 in. thick, black with yellow borders and has all 4 sides beveled and sealed. For dry, medium–duty work areas.U.S.A. Factory shipped. 3 ft.L x 2 ft.W"
Manufacturer: Northern Tool and Equipment
SKU: 171303
Category: Shop Supplies

DC 12V 21W with magnet base; cigarette plugin. Dimensions: 5.51in. x 4.72in. Amp Draw: 1.8 Removable Lens
Manufacturer: Northern Industrial Tools
SKU: 188111
Category: Safety

Fits bayonet and threaded filler necks on radiators and header tanks. Includes 4double ended cap adaptors to test 8 different caps, inflatable bladder to seal neck diameters found on most cars and commercial vehicles, pressure pump with 0-30 psi (0-207 kPa) gauge, air supply hose, drain hose, spare bladder, 3 extensions and complete instructions in a durable molded case. Made in Australia. 6 month limited manufacturer's warranty.
SKU: 46262
Category: Performance & Tune-Up Electrical & Diagnostic Diagnostic Testers

"Easily remove and install brake camshaft bushings and seals on heavy duty diesel applications. 7-pc. kit comes with two bushing washers (sized 1.6in. and 1.86mm. in dia.), one seal washer (2.125mm. in dia.), three bushing cylinders (sized 1.25mm., 1.5mm. and 1.625mm. dia.) and one driver/handle. Fits the six most popular sizes from Eaton,Rockwell, Spicer/Dana, Standard Forge and more"
Manufacturer: ESCO
SKU: 1459603
Category: Automotive

Six-ton hydraulic ram with bottle jack. Arbor platesand welded steel head 15 1/2 in L x 13 in. W x 29 9/16 in. H overall
Manufacturer: Northern Industrial Tools
SKU: 145882
Category: Metal Fabrication

"Axial pump with stainless steel industrial check valves and ball bearing transmission for long life and reliability. Features a 35ft. long hose 5/16in. diameter and ball bearing transmission. Also comes with a 15ft. GFCI cord, industrial strength gun and 1.5 gallon diesel tank. Truck Ship. U.S.A. Pressure (PSI): 1015Temp: 180°FFlow (GPM): 3.5Motor:1.5 HPPower: 115 Volt, draws 15 AmpsPump: Comet AxialDrive: DirectGun: Industrial rear entry 4000 PSINozzle Type: 15° fan, low pressureHose: 5/16in. x 35ft. 22mm thread-on coupler, rubberCart: 4 wheelExtras: Chemical Injector, 1.5 gallon diesel tank"
Manufacturer: NorthStar
SKU: 157394
Category: Pressure Washers

1/2in. drive chrome vanadium 15/16in. SAE standard socket.
Manufacturer: Northern Industrial Tools
SKU: 558143
Category: Hand Tools

"Reduces install time of our #3317875, 3317876 and3317877 car starters. Plugs into vehicleÜs wiring harness under dash. Fits GM models:BONNEVILLE; 87–99CENTURY; 91–96CONCOURS; 95–98CUTLASS SUPREME; 94–97DE VILLE; 91–99EIGHTY EIGHT; 93–99ELDORADO; 98–99GRAND PRIX; 94–96,LESABRE; 89–99LSS; 97–99LUMINA; 94–99MONTE CARLO; 90–98NINETY–EIGHT; 93–96PARK AVENUE; 96REGAL; 94–96REGENCY; 97–99SEVILLE; 95TORNADO; 89"
Manufacturer: Bulldog Security
SKU: 331758
Category: Safety

Stay safe with these DOT-approved helmets forGo-Kart fun.
Manufacturer: Northern Tool and Equipment
SKU: 135831
Category: "Go-Karts, Mini-Bikes + Scooters"

Water Temperature 60-210deg F Gauge comes with senderand wiring harness.
SKU: 74679
Category: Performance & Tune-Up AutoMeter Ultra-Lite

"Four 1/2in.–3/4in. replacement die cutter heads for ElectricPipe Threader, Item# 89134."
Manufacturer: Northern Industrial Tools
SKU: 891343
Category: Metal Fabrication

"Fan-forced wall heater is great for areas with space restrictions and room additions. Two-stage thermostat automatically switches from 750 to 1500 Watts when needed. Ribbon-type heating element. 60-minute timer. Quiet 2-speed fan. May be recessed in wall or surface-mounted. 120 Volt cord, can also behardwired. CSA/US approved. 13 3/16in.W x 4in.D x 16 1/2in.H. 5-year limited warranty on element."
Manufacturer: Ouellet
SKU: 173007
Category: Heaters + Stoves

"For use with 11, 13.6 and 16 GPM two stage pumps and single stage Parker pumps. D-Series single stage Use with 11, 13.6 and 16 GPM two stage pumps. Base to Center: 4 1/2in."
Manufacturer: Northern Tool and Equipment
SKU: 3050
Category: Hydraulics

Get a trailer mount in your favorite camo pattern. 6in. drop mount features Mossy Oak New Breakup.
Manufacturer: Curt Manufacturing
SKU: 33089
Category: Towing

"Suspension travels 4 3/4 inches! Adjusts for operator weight from 110 to 265 lbs. Seat tilt adjusts 2 1/2in. or 13 and26(degrees). Horizontal slide travel 8 3/4in.. Waterproof black vinyl covered seat is designed for ag, forklift and construction equipment. 19 5/16in.W x 22in.D x 19 3/16in.H."
Manufacturer: Northern Tool and Equipment
SKU: 17492
Category: Ag Equipment + Excavating

"This Husqvarna tractor features the popular Briggs & Stratton engine and convenient fender shift transaxles. Husqvarnariding mowers are known for their rugged quality and long-lasting service. You get great features on one of the toughest tractors out there — with all the creature comforts available today. The 6-position cutting height adjustment, comfortable seats and electric PTO clutch help make mowing easy. Truck ship. Engine: 24 HP Briggs & Stratton Twin Cylinder IntekTransmission: HydrostaticCutting Width: 48in. cutting pathHour and Amp Meter: Amp meter onlyMulch/Bag/Discharge: Mulch Deck/Bag/Side DischargeFront Axle: Cast IronGrease Fittings: YesWheel Size: 15in. x 6in. Front Wheels; 20in. x 10-8in. Rear WheelsTank Size: 4-gallon fuel tankBeverage Holder: YesModel YTH2448U.S.A."
Manufacturer: Husqvarna
SKU: 195604
Category: Grounds Maintenance

"King Kutters XB Rotary Tiller is designed for use with sub-compact tractors up to 25 HP. Adjustable shoes control cutting depth while rear shield controls soil mix. This tiller is a must for vegetable orhobby farmers, landscape contractors, nurseries and much more. Truck ship. U.S.A. 48in. cutting widthMaximum tilling depth of 5in.4 tines per flangeSlip-clutch protected drive lineCast iron center gear boxChain drive side gear boxLimited Category 1 hitchTruck shipU.S.A.Model TC-48-XB"
Manufacturer: King Kutter
SKU: 256012
Category: Ag Equipment + Excavating

"Constructed from select kiln-dried hardwoods, this tough dolly features non-marking, polyolefin swivel hard-rubber casters. PlatformType 16in. x 24in Size 900lb. Capacity Caster Size 3in. Platform: 4 1/2in.–5in. Off Floor"
Manufacturer: Northern Tool and Equipment
SKU: 00189
Category: Material Handling

"Powerful air cooled, 4-cycle, single cylinder, 5 HP Robin diesel engine runs 3600 RPM. 1.19 gal. fuel tank capacity. Rolled-steel frame provides protection. Mechanical seal, cast iron impeller, volute casing and galvanized steel hose couplings for long-lasting, low maintenance operation. 4ft. NPT male suction port. Rubber cushion protects against stress and wear due to vibration. 30 5/16in. x 20 11/16in. x 26in. overall. Truck Ship. Handles Solids up to 1 1/4in. Dia.Heavy dutypump delivers 75ft. max. headThis item will ship to you straight from the manufacturerPlease allow 2 to 3 weeks for delivery"
Manufacturer: Northern Tool and Equipment
SKU: 109301
Category: Water Pumps