EW Detail Gray Paint Quart @ Tools, Equipment & Painting online store

Holds most any type frame making painting much easier. Frame is held by the neck on a heavy duty precision lead screw to allow all parts of the frame tobe exposed. Rotates 90 degrees each way for easy access to every part of the frame. Stand raises 22 inches to a convenient standing or sitting height. Constructed of 2 inch square welded steel tubing. Two year manufacturer's warrenty. Made in the USA.
SKU: 28338
Category: Tools & Equipment Shop Tools Body & Fender Tools

"Project designs onto anything and outline or stencil them in minutes! Enlarge up to 400% or reduce to 70% vertically on included baseboard. Or swivel the head to project up to 2500% (up to 12ft. x 12ft.) onto walls or vertical surfaces. Twin 250 Watt bulbs deliver a bright, sharp image. U.S.A. Enlarge up to 400% or reduce to 70% verticallySwivel the head to project up to 2500% (up to 12ft. x 12ft.) onto walls or vertical surfacesSimply place your design (max. 6in. x 6in.) into the projector and enlarge and focus the projected imageCan project at any angle for vehicle hoods and fenders as well as flat surfacesTwin 250 Watt bulbs provide a bright, sharp projected imageFan protects original design from overheatingIncludes 14in. x20in. baseboard5-year limited warrantyU.S.A."
Manufacturer: Northern Tool and Equipment
SKU: 456100
Category: Painting

"Works from upto 50ft. away... and it works through walls, too! Produces 5 disgusting fart sounds! Requires 4 AAA batteries, not included. Remote control includes battery."
Manufacturer: Northern Tool and Equipment
SKU: 45140
Category: Sporting Goods + Toys

"Really tough! Injection molded from high density polyethylene, these big bins have extra heavy, double-thick wallsthat allow you to stack up to 200 pounds of tools, merchandise, parts and other cargo. Hopper front allows easy access. Bins can withstand temps ranging from -40°F to +250°F. Not affected by water, chemicals or solvents. U.S.A. Bin Size 19 3/4in. x 12 3/8in. x 11 7/8in. Blue"
Manufacturer: Quantum
SKU: 178402B
Category: Storage

"Clean and non-corrosive performance — perfect solution for combatting areas where rust andcorrosion thrive. Combines 300 PSI 50ft. self-retracting 3/8in. air hose reel with 50ft. 12 gauge electric cord reel with quad outlet. Attachments operate independently of each other. U.S.A. 300 PSI 50ft. self-retracting 3/8in. air hose reel50ft. 12 gauge electric cord reel with quad outletHeavy-gauge, powder-coated steel frame and reel construction15 1/2in. x 18 1/4in. x 17 1/4in."
Manufacturer: Coxreels
SKU: 100095
Category: Air Tools

"1/2in. x 4 1/4in.roller shaft is used to support bow and keel rollers. Hardened steel, zinc plated for corrosion resistance. Includes 2 pal nuts. U.S.A."
Manufacturer: Tie Down
SKU: 451038
Category: Trailers + Trailer Parts

"Cool–Tech ID Plus measures non–condensable gases (air) in the refrigerant and gives you the option of purging it directly from the tank or system. Displays the actual percentage of R–12, R–134a, R–22 and air. Hydrocarbon alarm sounds if flammable substances are detected. Features an on–board printer port to print copies of testing results. 115V powersource (configurable to 220V). 9in.W x 4 1¬2in.D x 11in.H; U.S.A."
Manufacturer: Robinair
SKU: 338706
Category: Automotive

"Maintenance kit contains allthe items necessary to perform required engine maintenance. The benefits of performing preventative on your Briggs & Stratton engine include extending the life of the engine, keeping the engine running powerfully, protecting the engineÜs warranty coverage, and helping to reduce costly repairs. Kit includes oil, air filter, sparkplug(s) and fuel stabilizer"
Manufacturer: Briggs & Stratton
SKU: 705109
Category: Engines

Features malleable iron jaws forsuperior strength and durability. Ideal for sandy soil. Fully assembled.
Manufacturer: Victor
SKU: 168908
Category: Grounds Maintenance

Want in-dash instruments that live up to the brutal standards of any style of racing? Hardcore Sport Comp instruments are precision engineered for accurate, fast-action response. Electric 3 3/8" tach features an easyto read black face with white numbers and yellow accents and looks at home in any vehicle. Operates on 4, 6, and 8 cyl. engines with standard, electronic, and most high performance racing ignitions with 12v power.
SKU: 74788
Category: Performance & Tune-Up AutoMeter Pro-Comp

Tubeless pneumatic tires are kind to the turf. 4-bolt hub. Item 1354 is pictured on theright . Tire Size: 18 x 800 x 8 Tire O.D.: 18.5in. Tread: Turf Weight Capacity: 515 Lbs. Inflate To 10 PSI Center Mount Hub Inside Diameter of Center Hole: 2 5/8in.
Manufacturer: Northern Tool and Equipment
SKU: 1354
Category: Tires + Wheels

Pearlized Colors may be used alone for fantastic pearlescent finishes, or use as follows: Mix with 4200 Series Transparent Graphic Colors for custom pearlescent blends. Use as a base coatfor the 4600 Series Candy Colors. For custom pearlescent blends, or candied type effects apply 2-6 light coats of 4200 Series Transparent Colors over Series 4300 Pearlized Colors.
SKU: 34422 001
Category: Auto Body Pinstriping / Airbrushing Airbrushing

"Full-featured crate has top, side and front entry. Folds flat or sets up in just. seconds. Sturdy steel frame and hinges with 600 denier washable nylon shell. Rounded corners protect auto and home interiors. Top storage includes fiber-filled pad with cool nylon face for warm weather, and fleece reverse for cold weather. Includes toy andtreat bag, plus pet name tag sleeve. Toy and treat bag strap converts to a temporary leash when needed. 36in. x 24in. x 27in. Sky Blue color."
Manufacturer: Northern Tool and Equipment
SKU: 35913
Category: Outdoors

Original style all chrome Chevy Rallye style Wheel. Quality accurate reproduction of the original. Wheel size is 15"x6" with 3-1/2" backspace. Configuration is 5-lug with a 4.75 inch bolt pattern. Compatible with disc brake applications.Made in the USA.
SKU: 62177
Category: Styling, Care & Custom Specialty Wheels Chevy Wheels

The Radiator Fin Rake has 4 different rakes. Includes 16, 18, 20, and 22 fins per inch. Simply draw the rake through the fins to straighten and clean. For more widely spaced fins use the (43473) Large Fin Rake(fits 8, 10, 12, and 14 fins per inch).
SKU: 43474
Category: Specialty Coatings Underhood Coatings Radiator Paint

Sparklescent- Uniqueblends of multiple effects colors that create single stage "candied" custom finish color. Apply over a white base.
SKU: 34517 001
Category: Auto Body Water Based Paint

Budget Gravity Feed HVLP Spray Gun - Here's a budget priced gun that delivers 65% or better transfer efficiency with a 1 year manufacturers warranty. This full size economy Gravity Feed HVLP Spray Gun includes a 1.4mm nozzle for spraying most finishes and a2.0mm nozzle for priming. Requires 9.5-14.8 cfm at 15-50 psi. Includes 1/4" air inlet, regulator, and a one quart capacity aluminum cup. Imported.
SKU: 34272
Category: Auto Body Painting Paint Guns

"These heavy-duty, tough and dependable stack-and-nest totes are the ultimate reusable container for storage and transporting your valuable items in any application. Theseproven containers are available in nine sizes and three colors for efficiency and inventory control. U.S.A Bin size 23 1/2in x 15 1/2in x 12in Capacity 1.70 Cu. Ft. Gray"
Manufacturer: Quantum
SKU: 278597G
Category: Storage

Adds 3 nylon mesh screen walls and one double-zipper nylon mesh screendoor to canopy. For use with Item# 55424 and 55425 10 ft. x 20 ft. heavy-duty canopies. Includes bungee cords.
Manufacturer: Canopy Factory
SKU: 55429
Category: Tarps + Covers

Chameleon Flair Colors are specialty effect pigment colors with angle- dependent, color traveling effects. Chameleon Flair Colors have a soft flowing transition fromone color into another. Color travel is viewable under even subtle lighting and is further intensified on curved objects with sharp contoursChameleon Flair Tint Bronze and Violet are tinting bases containing only the chameleon pigment and binder.Each is intended for application against a black background to enhance their effects.
SKU: 34458 001
Category: Auto Body Water Based Paint

"For use with Husqvarna and Poulanchain saws. 16in. bar length, 3/8in. chain pitch."
Manufacturer: Oregon
SKU: 193065
Category: Logging

"Master Lock trailer couplerlock adjusts to fit most makes and models of trailer couplers. Made of chrome–plated, die–cast zinc. Fits 1¬in. and 2in. couplers. Limited lifetime warranty."
Manufacturer: Master Lock
SKU: 178542
Category: Towing

Considered to be the finest quality tool storage solution for serious enthusiasts, this two drawer mobile storage unit can be used independantly or stacked in combination. Constructed entirely of 16ga powder coated steel, the unit features 120lb drawerslides, lockable 935lb sealed castors, welded side handles, secure cam lock system locks all drawers and cabinet doors, Industrial quality welding throughout.Includes drawer liners. Dimensions: 30"w (762mm) x 32"H (851mm) x 26"D (660mm)
SKU: 11151
Category: Tools & Equipment Shop Equipment Storage

8mm chrome vanadium combination wrenchwith mirror finish.
Manufacturer: Northern Industrial Tools
SKU: 558243
Category: Hand Tools

"A complete, step-by-step procedure ofconstruction including DOT-approved lighting/wiring schematic and bill of materials. Features welding procedures along with tips and tricks. Copyrighted, engineer-approved drawings are 1:20 scale on 24in. x 36in. sheets. U.S.A. Blueprint description: 18ft x 6ft.8in.Tandem Car CarrierTrailer capacity: 10,400 lbs.Trailer plans are non-returnable"
Manufacturer: Northern Tool and Equipment
SKU: 128549
Category: Trailers + Trailer Parts

Kosmic Kolor urethane enamel Kandys may be applied over any of our SHIMRIN Universal Base Coats. Kosmic Kolor urethane enamel solid colors are mixed 2 parts paint to 1 part catalyst (8525ZP 001 PT) to 1 part RU series reducer (example: 8529ZP 001 QT). For extra flow-out add3-6 oz additional reducer per mixed quart.
SKU: 8518ZP 006 QT
Category: Auto Body Painting House of Kolor Paints

Quikly convert any floor jack that has a 1-1/8 inch post style removable saddle to a transmission jack with this convenient adapter head. Features a full 750lb capacity, and the completely adjustable saddle even has spring loaded corner brackets to make fitting a snap. This is the quick, safe and convenient way to remove andinstall transmissions, transaxles and differentials without investing in a dedicated jack.
SKU: 10239
Category: Tools & Equipment Shop Tools Unique Tools

"Equips your skid steer loader to quickly plow snow or gravel to either side. Attaches quickly when you order the Skid-SteerAdapter Kit #103914. Manual type has 3 angle positions. Power angle model has six-way hydraulics, with up-down, left-right and down pressure. Industrial strength, 10 gauge moldboard plow is 24in. high. Has a high carbon, reversible steel cutting edge. Two heavy duty trip springs. Truck Ship. Description: Adapter Kit"
Manufacturer: Curtis
SKU: 103914
Category: Snow + Ice Removal

Polypropylene allows air to circulate! Water-resistant cover is sewn with tough interlocking seams for years of reliable service. Full-circumference shock cord along the bottom. Includes tie down cord and storage bag. Fits: 28ft. to 30ft. RV 2 Year WarrantyDimensions: 108in.H x 372in.L x 105in.W
Manufacturer: Classic
SKU: 45063
Category: Tarps + Covers

Includes1/8" NPT sender, 3/8" and 1/2" NPT fittings.
SKU: 74576
Category: Performance & Tune-Up AutoMeter Lunar

For chain pitches 1/4in., .325 and 90series
Manufacturer: Oregon
SKU: 193041
Category: Logging

Auto Meter's new selection of 1 1/2" fuel ressure gauges mount conveniently in the engine compartment for easy adjustments on fuel system, regulators, and carburetors. The gauges are availible in 0-1, 0-60, and 0-100 PSI ranges and can be mounted into anyfuel pressure regulator, line, or connector with a 1/8" NPT pressure port. Availible with either a black or silver dial face to match favorite line of Auto Meter High Performance gauges, these fuel pressure gauge will show your flow with precision!
SKU: 74159
Category: Performance & Tune-Up AutoMeter

Heavy duty tread for maximum stability and improved cleanout. Unique lug gives superior traction in any soil. Reinforced sidewall protects rim and preventstears and punctures. Type: 27 x 8.5-15 8PR Load Range: 4140 Lbs.
Manufacturer: Northern Tool and Equipment
SKU: 122639
Category: Tires + Wheels

Any "true hot-rodder" who has access to an IBM-compatible computer will love this engine simulation package. Run your engine specs (up to 1,000 cu.in.) on the software to verify and maximize performance gains. See on-screen which modifications will return the best rewards! Save time and money over actual changes.Version 2.0.7,for DOS or Windows. Accompanying book (soft- bound, 125 pages) provides instructions, background, and engine theory. By Larry Atherton
SKU: 46032
Category: Performance & Tune-Up Electrical & Diagnostic Books & Videos

Quills for professional quality work. Made of fine squirrel hair. Brown is softer than gray.Brushes come in plastic storage tubes. Imported.
SKU: 37020 A
Category: Auto Body Pinstriping / Airbrushing Pinstriping Brushes

"3/8 in. ratchet wrench with 8–pc. socket set1/2 in. impact wrench1/4 in. die grinder150mm air hammer with round chisel set10–pc. 25mm bit set10–pc. shank stone set5–pc. sanding paper setHand wrenches, polish wheel,blow gun, hex key, adapters, nozzles and other accessoriesIncludes blow–molded case"
Manufacturer: Northern Industrial Air Tools
SKU: 158121
Category: Air Tools

Guide kit with flags. Replaces OEM numberWestern® 59700.
Manufacturer: Northern Tool and Equipment
SKU: 105013
Category: Snow + Ice Removal

"Moves firewood, black dirt, gravel, patio rock, lumber, building materials andmore off the back of your truck with ease! Crank pulls the heavy duty bed liner into the tailgate roller. Commercial gradeFits all full-size pickups, wide beds 65in. plusMax Load Capacity 3000lbs"
Manufacturer: Northern Tool and Equipment
SKU: 352
Category: Material Handling

"The small ratcheting box end design allows access to tight spots where a ratchet and socket or a conventional racheting box end will not fit. The GearWrench™ moves a fastener along any length threaded rod without ever having to remove the wrench from the fastener. Surface Drive box end virtually eliminates the rounding of fasteners. Limited lifetime warranty. 1/4in. standard combination GearWrenchAll metal constructionFully hardened with nickel-chrome plated mirror finishMeets or exceeds ANSI, DIN and federal torque specificationsGearWrench needs as little as 5° to move a fastener, a standard 12 point wrench requires 30° or six times theroomLimited lifetime warranty"
Manufacturer: GearWrench
SKU: 558000
Category: Hand Tools

10,000 RPM Electric Tachometer Operates on 4, 6, or 8 cylinder engineswith standard, electronic, and most high performance racing ignitions with 12 volt power.
SKU: 74699
Category: Auto Accessories and Gifts

Original stylePontiac Rallye-2 all chrome Wheel. Quality accurate reproduction of the original. Wheel size is 16"x7" with 4-1/4" backspace. Configuration is 5-lug with a 4.75 inch bolt pattern. Compatible with disc brake applications. This is a special order wheel and is non-returnable. Made in the USA.
SKU: 62136
Category: Styling, Care & Custom Specialty Wheels Pontiac Wheels

"Qualitypadlocks from the worlds largest padlock manufacturer. All Master Lock padlocks are individually tested for strength and durability, and each offers a limited lifetime guarantee. 3 1/2in. long hard wrought steel bodyHardened steel staples resist cutting and sawingHardened steel locking eyes for strong cut resistanceTamper proof hinges help resist pryingAccepts shackle diameter up to 11/32in.Limited lifetime warrantyU.S.A.Model 703D"
Manufacturer: Master Lock
SKU: 178563
Category: Safety

Want in-dash instruments that live up to the brutal standards of any style of racing? Hardcore Sport Comp instruments are precision engineered for accurate, fast-action response. Mechanical 3 3/8" 160 MPH speedometer features trip odometer and retains mileage after recalibration.Easy to read black face with white numbers and yellow accents looks at home in any vehicle. Operates on 4, and 8 cyl. engines with standard, electronic, and most high performance racing ignitions with 12v power.
SKU: 74784
Category: Auto Accessories and Gifts

"This item is notfor sale in the state of California. Customers are responsible for checking local codes and regulations in their specific area. Model HM100-159486V10 HPHorizontal shaft; dimensions: 1in. x 2-7/8in., end tapped 3/8in.-24, 1/4in. keywayApproximate mounting base dimensions: 6.38in. x 3.12in.3.62in. bolt circle diameter for PTO connectionOverall engine dimensions: 11.11in.D x 17.89in.W x 14.55in.HCast Iron SleeveRecoil startElectronic ignition2 year consumer limited warranty"
Manufacturer: Tecumseh
SKU: 6010
Category: Engines

2-1/16" Dual Pod Nissan 300 ZX1990-96 (RHD)
SKU: 75427
Category: Performance & Tune-Up AutoMeter Pods

"To maintain that perfect landscape, our Troy-Bilt 2-cycle trimmers provide easy use and consistent dependable power. And they are easy to start, withSpring Assist starting for up to 55% easier pull-starting. Great for residential trimming jobs. Starts fast with a slow and steady pull. Adjustable D handle can be used right or left-handed. Engine: 21cc 2-cycleCut Width: 17in.Line Feed: Bump headShaft Style: CurvedAttachment Compatible: YesVibration Reduction: NoAdditional Features: Spring assist and EZ start features, adjustable D handleWeight: 17 lbs.Model TB25CSU.S.A."
Manufacturer: Troy-Bilt
SKU: 263191
Category: Grounds Maintenance

"Steel insert bends to fit your gears size for a tight, secure fit. Designed to hold shovels, axes, rifles, bows, weed whackers, rakes, gear and more — with no tools needed for adjustments! Rotates to any angle for a unique,custom fit. Air Ride suspension along with soft rubber fins cushion and protect gear from jarring bounces during your ride. Universal mounting system for handlebar, tubular and composite racks. You wont find a rack that holds your gear better than Air Ride Form Fit. Limited lifetime warranty. U.S.A."
Manufacturer: IPI
SKU: 46627
Category: Sporting Goods + Toys

Bring fine art to your deck or patio with a bench featuring a sculpted cast iron farm scene. The art is powder-coated in bronze with hand-painted highlights to giveit its own style and make it unique. The seat is constructed of quality hardwood and coated with weather-resistant outdoor sealant. 49 3/5in.L x 25 3/5in.W x 30 1/8in.H. Assembly required. Can be shipped UPS.
Manufacturer: Painted Sky Designs
SKU: 253601
Category: Outdoors

These 270deg "full sweep" gauges feature a quality engineered bourdon tube design and durable, performance grade movements for unsurpassed accuracy under the most demanding conditions. Includes -4 fittings and requires -4 braided stainless steelline.
SKU: 74941
Category: Performance & Tune-Up AutoMeter Phantom

Here's a laser-cut freehand airbrush template to expand your repertoire of custom graphic effects. Made from a solventproof flexible plastic for easy use on flat or curved surfaces likefenders, motorcycle tanks, and helmets. This Kustom FX Template "Tiki-Madness" (FH KFX-1SP) by Craig Fraser provides another dimension for your next work of art. See our website www.eastwood.com for this and other template images.
SKU: 37303
Category: Auto Body Pinstriping / Airbrushing Airbrushing Stencils & Templates

Save the Knees with RACATAC - Work on brakes, detail wheels, stripe and apply graphics in greater comfort than you thought possible. The unique design of the RACATAC supports the back while taking pressure off knees, ankles and toes. Weighs only 8 lbs. but supports up to 300 lbs. Uses 5 polyurethane ball bearing casters. Curved frame is constructed from 1/8"thick aluminum. Bicycle style seat adjusts from 11-1/2" to 15-1/2" tall, 3" horizontally and tilts. A 7" by 15" removable tray provides handy storage for tools and parts. One year manufacturer's warranty. Please allow 10 days for delivery.
SKU: 43346
Category: Tools & Equipment Shop Equipment Dollies & Creepers

Boost/Vac Mech. 30 In.Hg.-Vac/15 PSI Includes 6ft nylon tubing, with 1/8" & 1/4" NPT fittings.
SKU: 74041
Category: Performance & Tune-Up AutoMeter Street Rod

Original style all chrome Oldsmobile SS-2 and SS-3 Wheel. Quality accurate reproduction of the original. Wheel size is 15"x8" with 4-1/2" backspace. Configuration is 5-lug with a 4.75 inch bolt pattern. This is a special order wheel andis not returnable.Compatible with disc brake applications. Made in the USA.
SKU: 62155
Category: Styling, Care & Custom Specialty Wheels Oldsmobile Wheels

"A Kitty Mac Fresh Air Screen® is the easiest way to enclose your garage so you can enjoy the fresh air without bugs and mosquitoes. 16 ft. x 7 ft. screen fits most double–wide garage doors. Easy to install with durable hook–and–loop mounting, usually done in fewer than 30 minutes. Garage door opens and closes without removingscreen. Includes fiberglass screen with heavy–duty zippers on both sides, plus hook–and–loop material for attaching to garage door frame. A heavy–duty vinyl pouch at the base accepts 3/4 in. PVC piping (not included) for added rigidity and to roll up for vehicle access in or out of your garage. Built–in straps let you store the screen on your garage door frame without removing screen."
Manufacturer: Northern Tool and Equipment
SKU: 65519
Category: Tarps + Covers

The easy way to restore that showroom appearance toold or neglected cast iron manifolds, these kits are used with your high-speed die grinder to level rusted, pitted surfaces. The Standard Kit consists of twenty 80 grit abrasive cylinders and ten each of grit tapers, 120 grit cylinders and 120 grit tapers. Two mandrels are also included. THe Deluxe kit adds a carbide bead burr for faster cutting, to remove casting flash or shape the metal for a custom look. After the metal is smoothed, apply one of our high temperature coatings: your rust-prone manifold will keep that brand new look for years! Instructions incl.
SKU: 46078
Category: Styling, Care & Custom Styling Engine

For tachometers with remote memory plate. Will work with new recessed switch design.NOTE: Switch assembly only, mounting plate not included.
SKU: 74805
Category: Auto Accessories and Gifts

Auto Air Iridescent Colors may be used alone for a subtle iridescent effect with some color shift as light is reflected or use as follows: Use as a base for 4200 Series Transparent Graphic Colors for custom blends. Uses a base for the 4600 Series Candy Colors. For custom iridescent blends, apply 2-6 light coats of 4200 Series Transparent Colors over IridescentColors.
SKU: 34447 001
Category: Auto Body Pinstriping / Airbrushing Pinstriping Paints

Here's a laser-cut freehand airbrush templateto expand your repertoire of custom graphic effects. Made from a solventproof flexible plastic for easy use on flat or curved surfaces like fenders, motorcycle tanks, and helmets. This Kustom FX Template "Cloud-9" (FH KFX-5SP) by Craig Fraser provides another dimension for your next work of art. See our website www.eastwood.com for this and other template images.
SKU: 37307
Category: Auto Body Pinstriping / Airbrushing Airbrushing Stencils & Templates

Includes Model VL Double-action Airbrush, 3 nozzles (1,3,5), 3 needles, 1/4 oz. color cup, one 3 oz. and two 1 oz. paint bottles, 6' of compressor-matched air hose, and a copy of22 lesson airbrush guide.
SKU: 37073
Category: Auto Body Pinstriping / Airbrushing Airbrushing

"8 TPI, high speed steel construction7/32in. wideUniversal shankFor clean cutting in wood5blades per packageModel 48–42–0240U.S.A."
Manufacturer: Milwaukee
SKU: M0413
Category: Power Tools

"This IRWIN 1/2in. reduced shank Silver & Deming High Speed Steel Drill Bit is used to create large holes, heavy-duty metal drilling, automotive, body shop and metal fabrication. Bit is constructed of M-7 high speed steel for high resistance to abrasion during tough drilling applicationsThree-flatted shank design provides better chuck grip and reduces slippageIdeal for use in keyless chucksAll Silver & Deming bits are 6in. long and feature 1/2in. reduced shank that fits all 1/2in.drills.Standard 118° point for use in wood, metal and plasticModel 91136"
Manufacturer: Irwin
SKU: 962298
Category: Power Tools

"General utility, low carbon steel chain is ideal for pulling stumps, lashing cargo, pipeline installations, logging, tow chains, mooring use and truck tailgates. Popular DIY security chain and for simple tie–down applications. Zinc–plated and proof tested to ensure compliance with published specifications. Not for use for overhead lifting. U.S.A. Trade size: 3/16 in.Material size: .217 in.Nominal inside link length: .950in.Nominal inside link width: .405 in.800 lbs. maximum working load150 ft. per pail"
Manufacturer: Peerless
SKU: 335600
Category: Material Handling

Harmless Pry Tools. Made of glass filled nylon, these tools are tough enough to pry, but not hard enough to damage most surfaces. Use to removeclipped and glued on exterior trim, moldings and emblems. Also perfect for dash and interior disassembly as well as switch and connector removal. Excellent for scraping paint and powdercoating that has been softened with stripper or for use with solvents. Heavy glass filled construction is highly resistant to wear.
SKU: 11253
Category: Tools & Equipment Shop Tools Engine Tools

Operates on 4, 6, or8 cylinder engines with standard, electronic, and most high performance racing ignitions with 12 volt power.
SKU: 74542
Category: Performance & Tune-Up AutoMeter Silver

Specially designed drill-bit easily makes 1/2" hole so hardto reach areas can be more easily accessed.
SKU: 16003 B
Category: Tools & Equipment Shop Tools Metal Working Tools

"Brass movement with C shaped Bourdon tube up to 600 PSI. Helical over 600 PSI. 1/8 NPT male connection. For use with air, gas, oil or water. Black enameled aluminum pointer, white aluminum dial and temperature compensating polycarbonate window. Glycerin filled todampen pulse and vibration. Accuracy: ASME/ANSI B40.1 Grade A (2-1-2%) Range PSI: 0-30"
Manufacturer: Northern Tool and Equipment
SKU: 53720
Category: Gauges