"Milwaukee Wrench, Screw, and Clamp Kit — Model# 49-22-5012" @ Tools, Equipment & Painting online store

Emblem lights up when you apply the brake. Plugs into standard 4-wire flat trailer connector. Includes installation instructions. U.S.A. Emblem: GMC Fitsa 2in. square receiver
Manufacturer: Northern Tool and Equipment
SKU: 331920
Category: Towing

Use one sizelarger than hose to prevent restriction. Not for use on the suction line of our 2-stage pumps. Size: 1/4in.
Manufacturer: Buyers
SKU: 50C4W
Category: Hydraulics

"Whisper, our patented trimmer line, reduces noise levels by 50%. Comes with easy loading T25 tap advance head. The E-TECH II engine combines reduced emissions and low noise with a superior power/weight ratio. Hard chromium plated cylinder bore provide increased durability and extended product life. Wrought connecting rod - Forged connecting rod and three-piece crankshaft for extended product life. Air purge designed for very easy starting. Straight shaft for extended reach. Transparent fuel tank for easy fuel level control. The easy adjusting loop handle can be adjusted without tools. Engine: 31cc, 1.5 HPCut Width: 18in.Line Feed: Bump feedShaft Style: StraightSolidAttachment Compatible: YesVibration Reduction: YesAdditional Features: Lightweaight and easy load head.Weight: 13 lbs.Model 232LU.S.A."
Manufacturer: Husqvarna
SKU: 195918
Category: Grounds Maintenance

2 1/16" 73E/8-12F Traditional Chrome fuelgauge(E)
SKU: 74295
Category: Auto Accessories and Gifts

Features soft comfort grip and double-ground blades.Right or left handed.
Manufacturer: Northern Tool and Equipment
SKU: 1501507
Category: Hand Tools

"A compact, hand-held transmitteremits a distinct tone in any unenergized wire or cable. This tone is picked up by the receiver, an inductive tracer that identifies wires without piercing insulation. Audible feature differentiates transmitter signal from other signals. Can be used on: RJ-11 jacks Coaxial/BNC jacks Automotive fuse sockets Electrical wires Receiver has adjustable sensitivity control and LED indicator Includes 2 alligator clips, batteries and belt clip 5-year warranty."
Manufacturer: Gardner Bender
SKU: 967797
Category: Electrical

"Lufkin 1in. x 25ft. tape measure has a heavy-duty quint hook that lasts up to 10X longer than comparable brands. The heavy-duty blade is specially coated for wear resistance and durability. The Wiss snip has a textured grip and tough, molybdenum steel serrated jaws. Cuts both straight and curved lines, making it ideal forhome craftsmen to cut screening, carpeting, synthetic shingles, tile gutters and downspouts. Limited lifetime warranty. U.S.A."
Manufacturer: Lufkin
SKU: 154524
Category: Hand Tools

"This jack offers the industrys strongest bolt-thru, patented swivel mount system. U.S.A. 1000lb. lift capacitySide windA-frame mount -- bolt on or weld on7in. retracted21.5in. extended1.88in. tube housing dimension6 in. wheel dia.Mounting hardware notincluded"
Manufacturer: Bulldog
SKU: 128480
Category: Trailers + Trailer Parts

"Nylon gloveis made with a suede palm for better grip. Has mesh back for comfort and breathability. Matching color protective padding on the back. Green, size Large."
Manufacturer: Northern Tool and Equipment
SKU: 135914
Category: Gloves + Apparel

"Keep garage, shop or basement floors looking like new. Protective mat features ribconstruction to channel water and debris out and away from work area. Durable non-slip material stays in place and wont absorb oil or antifreeze. Cleans easily with soap and water. Truck Ship. U.S.A. Size: 9 ft. x 20 ft.Rib Thickness: 7/64 in.Valley Thickness: 1/16 in.Color: GreyRib Width: 1/8 in.Valley Width: 3/8 in."
Manufacturer: Northern Tool and Equipment
SKU: 67910
Category: Shop Supplies

"Ratchet binder does not include handle; the handle is removable and is sold separately (Item# 152979). A separate handle prevents theft or loss since binder cant be removed from load. Plus, a removable handle reduces cost (one handle fits all ratchets of similar size) and overall weight (no needfor additional handles). Binder has 3/8in. chain with up to 8in. take up. 5400 lbs. working load. U.S.A."
Manufacturer: Dixie Industries
SKU: 152978
Category: Material Handling

Component fortractor three-point hitch system. This Stabilizer Part is built to ASAE specifications. Fits all models under SD91130in. overall length3/4in. first hitch pin hole5/8in. second hitch pin holeWidth of 2in.Thickness of 1in.
Manufacturer: Northern Tool and Equipment
SKU: 2501925
Category: Ag Equipment + Excavating

Get in Tight With These Buffs. THese unique buffs will help you reach into deep recessed areas on your project. Great touse when the area is too large for a felt bob. Like the larger mushroom buff above, they feature 1/4" hex shafts and plastic ferrules. Max. rpm 10,000.
SKU: 13173
Category: Metal Buffing & Finishing Buffing Buffs

Receiver tube winch mount for 2in. tube.U.S.A.
Manufacturer: Curt Manufacturing
SKU: 142701
Category: Winches

Get That Show Perfect Finish We've taken 10of our most popular Eastwood colors and put them in convenient touch up pens. you can touch up any nicks or chips on your prize winning vehicle, great for small detail work too! Quality enamel paints withstand temperatures up to 300 degrees F and dries to the touch in 20 minutes. Great for last minute detailing at the car show!
SKU: 10234 Z
Category: Specialty Coatings Painting Paint Prep / Touch Up

"Cast iron pump features new Enbloc design, 15,000+ hour pump life, high-efficiency stainless steel reed valves with backstops, deep cast cooling fins, interstage coolers and directional airflow pattern. Industrial-grade pistonassembly. Oversized roller main bearings. Provides maximum compressed air cooling at 100% continuous-duty operation. Extended 2-year warranty when you use start-up kit Item# 1592149 (sold separately). Truck ship. U.S.A. 5 HP80-gallon vertical tank25 CFM @ 175 PSI maximum230 Volts1 phase2 stageMaintenance kit: 1592152Truck shipU.S.A.Model TS7N7.5"
Manufacturer: Ingersoll Rand
SKU: 1592133A
Category: Air Compressors

16–gauge galvanized steel1000–lb. load capacity per pairSold individually; must buy tow to make apairLegs angle in two directions; spring–loaded locking pinsNonskid nylon feet
Manufacturer: StableMate
SKU: 906043
Category: Shop Supplies

10 Dividers per package Dimensions (W x H x D): 6¬inW x 5¬inH x 4¬inD
Manufacturer: Stack-On
SKU: 178061
Category: Storage

"Drill Doctor® is as easy to use as a pencil sharpener!Sharpening time: 30-90 seconds depending on bit size and amount of wearSharpens high speedsteel, cobalt and carbide bits at 118° and 135°Splits points for self-centering drill bitsReplaceable diamond wheel lasts through up to 500 sharpeningsPowerful 120 Volt motor6 ft. power cordU.S.A.3.0 Amp Motor18000 RPMIncludes two chucks: 3/32in. to 1/2in. and 1/2in. to 3/4in."
Manufacturer: Drill Doctor
SKU: 156093
Category: Power Tools

Divider model RD-575 has adjustable orifice. Priority flow divider separates one input flow into two output flows. 0-30 GPM capacity. Priority flow is adjustable. One flow is constant and unaffected by input flow variations or load changes. The other port is an excess flow that can provide anothercircuit. 3/4in. ports.
Manufacturer: Prince
SKU: 2049
Category: Hydraulics

"Watertight agricultural thermostat precisely and automatically controls your heating, cooling or ventilation systems from 30° to 110°F. Accepts 120V or208/240V AC. Must be hardwired. U.S.A. Temperature differential of approximately 3.5 degrees16.0 full load amps @120V9.2 full load amps @ 208V8.0 full load amps @ 240V"
Manufacturer: Northern Tool and Equipment
SKU: 162570
Category: Heaters + Stoves

"Makitas AN922 pneumatic framing nailer is a lightweight (only 8.4 lbs.) yet sturdy framing nailer, firing 2in. to 3 1/2in., 22° plastic or wire collated round- head nails. The easy-load, rugged aluminum magazine is as simple as inserting the nails and pulling backon the pusher rod. A built-in ceramic air filter system prevents debris from entering the tool, extending tool life and reducing down time. The 9 quick-dial depth adjustment settings give you precise control of nail depth. Nose piece with sure-grip spikes prevents slipping. 65–120 PSI operating pressureErgonomic handle with rubber grip for operator comfort3–mode selector switch for “bump”, “sequential” or “Off” operationModel AN922"
Manufacturer: Makita
SKU: 1591910
Category: Air Tools

Durable commercial grade oversized canopy provides shelter and protection for your vehicles and equipment. Strong 2in. diameter steel frame. Durable white UV stabilized polyethylene canopy. House style. House style20 Ft.L x 18 Ft.W x 11 Ft.HDurableUV stabilized polyethylene canopyWhite2in. diameter frame8 legsSlip and pin connections for durability and easy assembly
Manufacturer: Canopy Factory
SKU: 252387
Category: Tarps + Covers

"Model 202432-0035-E18 HPHorizontal shaft; dimensions: 1in. x 3-21/32in., threaded 1in.-14 with 1in. tapped lengthApproximate mounting base dimensions: 7.69in.x 3.37in.Flange mount bolt circle diameter: 3-5/8in., 5in., 6-1/2in.Overall engine dimensions: 12.4in.D x 16in.W x 17in.HDual-clean air cleaner with foam precleaner ensures maximum protection for extended engine lifeRecoil start Dura-Bore™ cast iron cylinder sleeveMagnetron® electronic ignition Muffler and exhaust manifold includedExternally threaded PTO shaft for use on pumps; U.S.A.Overhead valve design (OHV) for cooler operation and longer valve lifeLow oil sensor2 year limited warranty"
Manufacturer: Briggs & Stratton
SKU: 60885
Category: Engines

"Features 5° sweep offset design, push-button quickrelease and ergonomic handles. Limited lifetime warranty."
Manufacturer: Titan
SKU: 909104
Category: Hand Tools

"Never shovel your sidewalk or driveway again! Powered by a reliable 5 HP, 2-cycle Tecumseh engine and comes with a Clean-Sweep auger. Remote chute rotates a full 190°. Snow intake height is 10 1/4in. Shipsvirtually fully assembled."
Manufacturer: NorthStar
SKU: 26021
Category: Snow + Ice Removal

Four-bolt low speed hub. 3/4in. bore with ball bearings. Zerk grease fitting. For front or free wheeling rear wheel. Fits #1340 thru #1342 rims. Set of two. 2.75 Bolt Circle 3.75 O.D. Overall Length: 2.5in. Outside Bearing to Outside Bearing: 2.5in.Use For Free Wheeling Axles
Manufacturer: Northern Tool and Equipment
SKU: 13830
Category: "Go-Karts, Mini-Bikes + Scooters"

"Filter regulator has two 3/8in.NPTF ports, poly- carbonated bowl and 150 PSI inlet, 125F. Sintered bronze 50 micron filter element, manual drain. Model 06E21A13. U.S.A."
Manufacturer: Northern Tool and Equipment
SKU: 156405
Category: Air Tools

Fabricate most tubingrestoration projects with these three high quality tools: Double/Single Flare Kit (49001), Tubing Cutter (49003), and Tubing Bender General Purpose (49002).
SKU: 49000
Category: Performance and Tune-Up Brakes & Suspension Brake Tools

The Deep Reach Extension solves the access problem associated with many bigblock engines.
SKU: 46048 A
Category: Performance & Tune-Up Drivetrain Engine Tools

"For use with HondaEU2000i generators. Hook up 2 Honda EU2000i generators to supply up to 30 Amps of combined power through an RV-style receptacle (included with kit). 5-year limited warranty. U.S.A. Hooks up 2 Honda EU2000i generatorsRV-style receptacle included with kitFeatures a weather-resistant stainless steel cabinet with foam-padded baseFastens securely to your generator with a wide hook & loop strapPlug in 2 power cables, attach the ground terminal and installation is complete5-year limited warrantyU.S.A.Model HPK2000/ul"
Manufacturer: Reliance Controls
SKU: 100171
Category: Generators

"Super Tuff Drawers are available in nine sizes and four colors and are designed for efficient organization of heavy parts,supplies, tools or equipment. Super Tuff Euro Drawers are injection molded from a virgin grade high impact polystyrene and are virtually unbreakable. With a full 12- gauge wall thickness, these heavy duty bins can be used on QuantumÜs open and closed shelf units and pick racks. Sold in cartons only. U.S.A. Bin Size 11 5/8in. x 5 9/16in. x 4 5/8in. Gray"
Manufacturer: Quantum
SKU: 278550G
Category: Storage

"A single person can easily align a tow vehicle with a trailer hitch without jumping in and out of the vehicle. Get Hitched consists of two telescoping rods with magnetic bases and 2 1/2 in. day–glo balls on top. One rod is place behind the tow vehicleÜs hitch ball and the other on the trailer hitch. With the balls adjusted to the same height, the driver can “line up” the two balls through the rear window. When the two balls touch, the ball and hitch are in alignment. Useful for aligning boat trailers, utility trailers, horse trailers, RVsand more."
Manufacturer: Northern Tool and Equipment
SKU: 330479
Category: Towing

Vinyl-coated fiberglass stick is splinterproof for years ofuse. 55in. long. Standard tip and grip. U.S.A.
Manufacturer: Northern Tool and Equipment
SKU: 25432
Category: Ag Equipment + Excavating

"Heavy duty vinyl-coated nylon fabric keeps the elements out so you stay warm and dry. Door slips on in seconds! Tough 40-mil. clear vinyl windows on all four sides and roof. Heavy gauge nylon thread lockstitching. Easy to install-only 4 holes to drill! Includes S-hooks and velcro fasteners. U.S.A. Fits: BOBCAT® G Series 540, 640, 740, 553, 751, 753, 763, 773, 863, 873, 963, S175, S185, T190 and 840 Series"
Manufacturer: Northern Tool and Equipment
SKU: 1038607
Category: Ag Equipment + Excavating

Good for tandem axles. Smooth with ends curved down. Sold as single unit. U.S.A. Length:66in.Width: 9in.Height: 9in.Fits Wheel: 14–15in.
Manufacturer: Shipshape
SKU: 12660
Category: Trailers + Trailer Parts

"Includes 3 units, aromatic lure and cotton balls. Deer are attracted to posts by the lure scent, then harmlessly shocked tocause them to flee. Covers approx. 1200 sq. ft. area. Each unit requires 2 AA batteries (6 total; not included). One set of batteries lasts about a year. Easy to assemble and install."
Manufacturer: Havahart
SKU: 168909
Category: Grounds Maintenance

Maximize the Shine! You've spent alot of time and money prepping and painting your car. Don't ruin the final results with improper color sanding and buffing techniques. This 60 minute VHS format video shows step-by-step how to eliminate runs and other surface defects along with proper sandingand buffing techniques.
SKU: 34130
Category: Metal Buffing & Finishing Buffing Books & Videos

Aluminum Constructed of tough .080 marine-grade mill-finish aluminum One-piece main tub designed for greater strength Stainless steel ROTARY latch design Fully braced lid design Light comes on automatically when the lid is opened Completely protected connectingrod for trouble-free life Dual gas struts Heavy-duty steel parts tray Small parts storage at each end 2 screwdriver holders for up to 10 screwdrivers Includes full box liner and our patented grip-rite no-drill mount kit Black truck boxes finished with durable enamel powder coat 7-year limited warranty; U.S.A.
Manufacturer: Northern Industrial Profesional Series Truck Boxes
SKU: 348179
Category: Automotive

For use with MetalAce® 22B English Wheel. Measures 18 in.L x 21 in.W x 27 in.H. Assemblyinstructions included. U.S.A.
Manufacturer: MetalAce
SKU: 144452
Category: Metal Fabrication

"D-handle power and a right angle drive head make this drill package perfect forstud and joist drilling. Powerful 7 amp motors and three speed ranges make this a versatile tool that will handle a wide range of applications. 1/2in. capacity in steel; handles up to 29/16in. selfeed bit Powerful 7 Amp motor For drilling holes in studs, joists and hard-to-reach areas Two speeds: 335 RPM and 750 RPM Head and handle swivel 360°, tight-locking in any position Includes chuck key and holder, side handle, steel carrying case, and accessories for installing/removing right angle head Model 3102-6 U.S.A."
Manufacturer: Milwaukee
SKU: M0071
Category: Power Tools

"100% polyesterjersey wicks away moisture and features a doubleknit collar and tapered cuffs. Top-stitched shoulder seams, collar and cuffs for additional seam strength. Design and logo printed for a seamless fit. Choose from 5 colors in sizes Small, Medium, Large or X-Large. YellowSize large"
Manufacturer: Mossi
SKU: 135909
Category: "Go-Karts, Mini-Bikes + Scooters"

"Brass movement with C shaped Bourdon tube up to 600 PSI. Helical over 600 PSI. 1/8 NPT male connection. For use with air, gas, oil orwater. Black enameled aluminum pointer, white aluminum dial and temperature compensating polycarbonate window. Glycerin filled to dampen pulse and vibration. Accuracy: ASME/ANSI B40.1 Grade A (2-1-2%) Range PSI: 0-300"
Manufacturer: Northern Tool and Equipment
SKU: 53658
Category: Gauges

Tired of Wearing Out Your Taps and Dies? Most economical tap and die sets don't last, because they're made from carbon steel. Our Tap and Die set is made from long lasting Tungsten steel. 60 pieces cover most commonly used SAE sizes from 10-32 to 1/2"-13 and Metric sizesfrom M3 x.05 to M12 x 1.75. Professional grade tap handle and die stock securely holds tooling to help make smooth, accurate threads. Blow-molded case keeps everything organized. Drill chart included. Limited Lifetime manufacturer's Warranty. Imported.
SKU: 43257
Category: Performance & Tune-Up Drivetrain Engine Tools

"Set contains sizes 3/8 in., 7/16 in., 1/2 in., 9/16 in., 5/8 in.,11/16 in., 3/4 in. and 7/8 in. With clip rail storage.Limited lifetime warranty."
Manufacturer: Northern Industrial Tools
SKU: 558318
Category: Hand Tools

"Dont lug that heavy propane tank anymore! ; Tank Taxi™ is designed for easy transport of 20-lb. propane tanks, 5-gallon water bottles or bags of fertilizer. Rolls easily on poly wheels. Fold-away handle snaplocks open when in use. Rugged double wall construction wont chip or rust. Propane tank not included. U.S.A."
Manufacturer: Northern Tool and Equipment
SKU: 173751
Category: Material Handling

"TheSuperGrip pipe clamp combines the adjustability of the sliding jaw of screw clamps with the conventional–grip pliers design, eliminating the need to adjust the jaws for different tasks. The (cradle) jaw aligns and holds pipe firmly in pla"
Manufacturer: Bessey
SKU: 15101020
Category: Hand Tools

"New! High-quality hoses from Northern! Anew line of hoses in response to the demand for a greater selection of longer, more durable hoses with higher-quality hose fittings. Reinforced yellow PVC3/8 in. x 50 ft."
Manufacturer: Northern Industrial Tools
SKU: 1586656
Category: Air Tools

100-lb. load rating.1/2in. bore. Size 6in. x 1.5in.. U.S.A.
Manufacturer: Northern Tool and Equipment
SKU: 12314
Category: Tires + Wheels

Purple Metallic is a hybred Epoxy/Polyester blend with a bonded metallic additive to assure a uniform finish. Cures at 400 degrees F (204 degrees C) for 20 minutes after flow-out (that transition from dry powder to a liquid look) occurs. Produces a smooth 80-90% high gloss finish. May be topcoated with (10093) Gloss Clear or (10286) Super Gloss Clear for improved UV resistance, gloss and increaseddepth.
SKU: 10338
Category: HotCoat Powder Coating Powders Specialty Colors

This is the aerosol product not powder. Here's a paint that almost looks like plating! Reflective enough to faintly see yourself init. High distinctiveness of image. Normal gloss readings do not apply. Approximately 30% as reflective as a mirror. Great on underhood and chassis hardware, small brackets. Contains zinc for corrosion resistance. Withstands temperatures up to 300 degrees F. One 12 ounce net wt. can covers about 6 square feet. Metallic Enamel formulation.
SKU: 10352 Z
Category: Specialty Coatings Detail Coatings Metal Finishes

"Versatile bins help you organize your work and storage areas for greater efficiency. Heavy-duty polypropylene with color molded right in. Virtually unbreakable, they are unaffected by weak acids and alkaline solutions. Waterproof and rustproof. Steam cleanable up to 250øF. 6 colors let you color code parts and tools. Optional dividers increase storage options. Optional windows maximize storage capacity, prevent spillage and protect parts from dust and dirt. Sold in cartons only. U.S.A. 10-7/8in. x 4-1/8in. x 4in. BlackQty. 12"
Manufacturer: Quantum
SKU: 278518BK
Category: Storage

Chip Repair Express - No buffing or sanding required! This new system from Langka repairs small scratches and chips faster and better than any other system we've seen. And since no surface conditioning is used, the repair more closely resembles the factory texture of the surrounding paint. Includes enough product totreat up to 30 chips, all you need to add is the touch-up paint, t-shirt material and a few minutes of your time.
SKU: 31277
Category: Specialty Coatings Painting Paint Prep / Touch Up

"Unique enclosed design virtually eliminates warping or torquing. Requires no brackets or adjustable torsion rods, making cleaning fast and easy. 6in base allows Screed King to float in any slump of concrete while the curl edges help roll excess concrete back to the rakers. The MAGFLO boards are constructed of light magnesium that doesnt react with concrete like aluminum screed bars. Threaded mounting studs stay with the board for quick coupling to Screed King power head. Truck ship. Factoryshipped. 12ft wide"
Manufacturer: Crown Construction Equipment
SKU: 999627
Category: Construction

"Versatile bins help you organize your work and storage areas for greater efficiency. Heavy-duty polypropylene with color molded right in. Virtually unbreakable, theyare unaffected by weak acids and alkaline solutions. Waterproof and rustproof. Steam cleanable up to 250øF. 6 colors let you color code parts and tools. Optional dividers increase storage options. Optional windows maximize storage capacity, prevent spillage and protect parts from dust and dirt. Sold in cartons only. U.S.A. 11in. x 8-1/4in. x 7in. Green Qty. 6"
Manufacturer: Quantum
SKU: 278523GN
Category: Storage

Clevis pin hitch replaces handle on #143600 or #143700 wagon. 1/2in.diameter.
Manufacturer: Northern Tool and Equipment
SKU: 143702
Category: Grounds Maintenance

"Economical modified sine wave AC power from your batteries anytime, anywhere. Superior surge capability tostart almost any load, including small air conditioning units. Offers seamless transfer between inverter and shore or generator power so that electronics will not suffer a sudden loss in power. Includes battery charger to provide fast and safe charging. 2000 Watt inverter100 Amp charger"
Manufacturer: Xantrex
SKU: 45625
Category: Generators

"With high quality, glide action pressure pump. Powerful jack makes big loads easy to lift. Minimum heightis 9 1/4in., lifting height is 4 3/4in. Handle included."
Manufacturer: Torin
SKU: 144896
Category: Automotive

"Ideal for stripping solid or stranded wire. Automatic jaw–loaded wirestripper self adjusts to strip wire. Crimps insulated, non–insulated and ignition terminals. #10–#26 AWG."
Manufacturer: Gardner Bender
SKU: 96751
Category: Hand Tools

Provides protection when logging or using achain saw. Navy blue.
Manufacturer: Husqvarna
SKU: 195931
Category: Logging

"Fast cutting action on mufflers and tailpipes, body panels and general repairs.401in. chisel shank2 5/8in. strokeAlloy steel barrel, heat-treated piston, coil spring retainer3500 BPM15 CFM@ load1/4in. air inlet, 3/8in. minimum hoseChisels include edger, cutter, straight and cutting chisels, punch andplastic pouchModel IR116K"
Manufacturer: Ingersoll Rand
SKU: 154130
Category: Air Tools

Double-ball race swivels. Exclusive Lockweld construction. 1 3/4in. x2 7/8in. to 3in. bolt hole spacing. Polyurethane Wheels. Wheel Size: 4in. x 1 1/4in. Mount Height: 5in. Capacity: 300 Lbs. Wheel Type: Swivel
Manufacturer: Fairbanks
SKU: 189118
Category: Casters

Original style powdercoated ChevelleSS style Wheel. Quality accurate reproduction of the original. Wheel size is 15"x7" with 4-1/4" backspace. Configuration is 5-lug with a 4.75 inch bolt pattern. This wheel requires trim rings. Made in the USA.
SKU: 62193
Category: Styling, Care & Custom Specialty Wheels

"Strong & functional. Adjustable temples. Lens can be angle–adjusted to suit specifictasks. DX™ anti–fog hard coat. 99.9% UV protection. Meets ANSI Z87.1 and CSA Z94.3. U.S.A. American red, white, blue frameGray lens"
Manufacturer: AO Safety
SKU: 174711
Category: Safety

1/2in.hitch pin fits 1 1/4in. receiver tube. Zinc plated steel. Includes hair pin cotter.
Manufacturer: Buyers
SKU: 330560
Category: Towing