Instant Garage 6-Pk. of Auger Anchors with Clamps @ Tools, Equipment & Painting online store

2 3/4" x 17 1/2" sheets (50 sheets perpack)
SKU: 31099
Category: Auto Body Body & Fender Cleaning & Stripping

CylinderHead Temp. 140³-340³F - Includes electric 1/8" NPT sender. May be necessary to drill and tap threads into cylinder head.
SKU: 74452
Category: Performance & Tune-Up AutoMeter Sport-Comp

"Communicate with your dog up to 100yards, using the hand-held transmitter to signal receiver collar. Sends negative tone or static stimulation. 10 levels of stimulation, easily adjusted with transmitter thumb knob. For dogs under 40 lbs. Great for obedience trainingCan stop unwanted behavior like digging, chewing, jumping on guests or barkingWaterproof receiverBatteries includedLifetime limited warranty"
Manufacturer: Northern Tool and Equipment
SKU: 35518
Category: Outdoors

"5.5 HP four-stroke JD engine does NOT require gas/oil premix! This rugged bike floats on low-pressure 19in. knobby off-road tires. Hydraulic front shocks for added comfort. Large banana seat, all-time safety light and metal fenders. Approved for sale in California.Not available for sale in Texas.5.5 HP OHV engine with alt. recoil startCentrifugal clutchHand activated rear band brakeFront head lightFront hydraulic suspensionLarge banana type seat19in. knobby tiresMetal front & rear fenders10in. steel rimsTool kitDouble down tube frameEasily assembled"
Manufacturer: Northern Tool and Equipment
SKU: 13174
Category: "Go-Karts, Mini-Bikes + Scooters"

Handor Ratchet Extension Sets - These locking extensions with handles can be used by their hand grips allowing you to start threads by hand and tighten with a ratchet or air tool without even removing your socket from the fastener. Also has a unique socket lock with a pull sleeve for release. Includes 6" & 10" lengths. Imported.
SKU: 11130
Category: Tools & Equipment Shop Tools General Hand Tools

House of Kolors post sanding prep is a water based cleaner that removes sanding residue as well as dirt,grease,wax,and adhesives. This product is designed for both initial and final surface prep.
SKU: 85001
Category: Auto Body Painting House of Kolor Paints

"Socketset comes with 1/8, 5/32, 3/16, 7/32, 1/4, 5/16 and 3/8in. sockets all stored on an easy-access metal rail. Model# SK19751. U.S.A."
SKU: 1517286
Category: Hand Tools

With this economical and easy-to-usekit, you can carry out a wide variety of auto body repairs even if you don't have access to a welder. This comprehens- ive package provides the tools and materials needed to install metal repair panels securely-without welding. Panels are first flanged, then bonded with structural adhesive, and flush riveted. The result is a flat, repair surface requiring little or no filler. The panel adhesive eliminates any corrosion at the joint. No-weld panel repair kit contains dimpling pliers, 1" panel flanger, compression pliers, 20 panel holders, adhesive, and instr. Caulk gun required.
SKU: 31102
Category: Auto Body Panel Repair & Prep Panel Prep Tools & Accessories

Handle loads easily with 230° steering. Reinforced forks are 27in. W x 43 1/2in. L. Lifts from 3ft. to 7 1/2ft. Rolls smoothly on 7in. rear nylon wheelsand 3in. nylon front rollers. Truck Ship.
Manufacturer: Northern Industrial Tools
SKU: 143018
Category: Material Handling

"Choice of styles. Half finger models keep finger tips free for action or fine work. Gray, wool blend gloves have rib knitto block out wind. Style: Half Finger with Mitten Pullover Size: X–Large Construction: 85*#37; Wool/15% Nylon 3M Thinsulate®"
Manufacturer: Wells Lamont
SKU: 1701821
Category: Gloves + Apparel

Got the Sagging Headliner Blues? Temporary repairs of worn-out headliners with contact cement and tacks are either short-lived or look terrible. Achieve a professional looking repair with the Heads-Up Headliner Kit. This kit includes 1/8" foambacked headliner material measuring 4' 5" wide by 6' long (enough for most cars), 2 dome light clips, and instructions on the box. Headliner can be modified to accommodate sunroof equipted vehicals.
SKU: 52221
Category: Styling, Care & Custom Styling Custom Interior

"Opens most chucks on tools by: Skil, Milwaukee, Makita, Ingersoll-Rand, Chicago Pneumatic, Delta, Craftsman, Porter Cable, Black & Decker, Jacobs, Cooper, Craftsman, Rockwell, Ridgid andmore! High-quality steel. 3in. x 3in.. 1 year warranty."
Manufacturer: Northern Tool and Equipment
SKU: 15396
Category: Power Tools

Pack of 2 Replacement Fiberglass Refills for theFiberglass Rust Brush (34119).
SKU: 34119A
Category: Specialty Coatings Painting Paint Prep / Touch Up

"Model CV18S-6155518 HP twin cylinder air-cooled engineVertical shaft: 1.125in.diameter x 4.46in., end tapped 7/16-20in. with CCW rotation Approximate base mounting dimensions: 10in. bolt circleFlange mount bolt circle diameter: 10in.Overall engine dimensions: 19.4in.D. x 16.7in.W. x 14.1in.H.Overhead valvesCast iron sleeveFull pressure lubrication with oil filterHydraulic valve lifters624cc displacementElectric startElectronic ignitionRemote governor control with top speed of 3600 RPMFor front-engine riders, garden tractors, ZTR mowers, wide area walk-behind mowers and commercial equipmentMade in U.S.A.2 year limited warranty"
Manufacturer: Kohler
SKU: 701700
Category: Engines

2-1/16" Triple Pillar Mustang1987-93
SKU: 75144
Category: Performance & Tune-Up AutoMeter Pods

Easily converts Freon R-12 manifold for R-134A systems by changing old R-12 brass manifolds to R-134A. Many A/C injectors use this quick-connect snap stylefor the low side dye/oil application. 90ø snap set is a push-on style with ad84 vacuum pump/tank adapter (included). Meets EPA snap rule. Hoses not included
Manufacturer: CPS
SKU: 338503
Category: Automotive

Perfect Detailers. Stop using match sticks! Disposable micro-brusheswith non-linting, non-absorbing tips are perfect touch-up tools. Reach into the tightest spots.
SKU: 34112
Category: Specialty Coatings Painting Paint Prep / Touch Up

"3/4 in. keyed, 5/16 in.-24 tapped endMuffler guard, RV throttle controlModel OH195EA-71237GU.S.A. Easy-pull recoil starterPaper air filtrationFine meshin-line fuel filterLareg, non-rusting polyethylene fuel tankClimate Guard® prevents carburetor icingCast iron sleeve21 fluid ounce oil capacity"
Manufacturer: Tecumseh
SKU: 60516
Category: Engines

Trailer Door Cabinet - Constructed from heavy gauge brushed aluminum this wall organizer lends a professional look to your trailer or workshop. Each of the 3 shelves holds up to 9 aerosol cans or pint containers. Fold down shelf providesa temporary work surface and includes a double wide towel rack. Measures 30" high by 25" wide by 5-1/2" deep. Made in the USA
SKU: 43420
Category: Tools & Equipment Shop Equipment Storage

A uniquetwo stage process removes oxidation and achieves a brilliant shine on diamond plate, wheels, tool boxes, extruded rails and much more. Imported wool polishing pads are the key to achieving luster where contours are a problem. Kit contains 16oz each Magic Mix metal polish and prep, and 4 polishing pads.
SKU: 52357
Category: Styling, Care & Custom Car Care & Protection Cleaning & Polishing

"Developed for shock jockeys, this full nylon pouch was designed to stand upright when set down. High–density ballistic nylon (1680 Denier) is the foundation for this Extreme product. Heavy–duty nylon and polyester fabric provideextra strength, and PVC reinforcement gives large pockets and major stress points additional strength and durability. Multiple pockets organize electrical tools. Carry it three ways — on your belt, over your shoulder or with the integrated handle. Rubber reinforced bottomBuilt–in cell phone pocket2–way radio pocketPlastic reinforced knife pocketModel 54017"
Manufacturer: Northern Tool and Equipment
SKU: 169701
Category: Storage

ThisGrinder packs a 22,000 rpm punch. Perfect for porting or detail polishing on cars, boats, aircraft, model buildings, etc. 6" long and equipped with a 1/4" collet. Uses 4 cfm @ 90psi. One year warranty. Imported.
SKU: 46047
Category: Performance & Tune-Up Drivetrain Porting & Grinding

"Blades feature bi–metal construction for a fast–cutting, long–life blade that can bend without breaking. Precision set teeth for faster, smoother cuts. Aggressive hook angle for super–fast cuts. Electron beam weld for stronger, longer–lasting teeth.8 in.18 TPI25 pk."
Manufacturer: Irwin
SKU: 962379
Category: Power Tools

Manual tire changer has a 15in. x 18in. base and7 1/2in. diameter x 3/16in. thick wheel rest plate. All steel construction. Change your own tires and save BIG money!Handles tires from 8in. to 12in.15in. x 18in. BaseSpindle Diameter: 1 3/4in.Tire Bar Length: 36in.
Manufacturer: Northern Industrial Tools
SKU: 13472
Category: Tires + Wheels

"35,000-lb. max. gross trailer weight, 7000-lb. max. vertical load. 2 1/2in. I.D. 4-bolt mounting plate is6.13in. x 6.5in.. U.S.A."
Manufacturer: Buyers
SKU: 1289
Category: Towing

For use with our #1523642 Front Light. U.S.A.
Manufacturer: LDPI Lighting
SKU: 1523643
Category: Automotive

Component for tractor three-point hitch system. This StabilizerPart is built to ASAE specifications. Pin diameter: 7/8in Usable length: 1 3/4inOverall length: 4 1/2inThread diameter: 5/8inThread length: 2 in
Manufacturer: Northern Tool and Equipment
SKU: 2501928
Category: Ag Equipment + Excavating

Hand Held Bending Brake - Shape patch panels on site. Accurately create bends and professional looking folds in up to 22 gauge steel or 24 gauge stainless steel. Perfect for creating patch panels for door edges of rocker panels, etc. Assembledwith high strength Grade 8 bolts. High carbon steel drop forged jaws are marked in 1/4" increments to assure straight bends. Compound leverage and serrated jaws provide a non-slip grip. Cushioned handles. Limited lifetime manufacturer's warranty. Made in the USA.
SKU: 28209
Category: Metal Shop Fabrication Bending

Helps make your tools safer and more comfortable to use. Bonds to metal, wood, and most other surfaces. Just dipyour tools and let them air dry. Won't chip, crack or peel under normal use. Flexible from -30 to +200 F. Acid and salt water resistant. NOTE: This item cannot be shipped by air.
SKU: 43027 Z
Category: Specialty Coatings Detail Coatings Miscellaneous Coatings

"Cover features triple-layer polypropylene top and rugged polypropylene sides. Fullheight zippered access panels allow complete access to door, sides and rear. Adjustable front and rear tension panels provide a custom fit. Air vents reduce wind lofting and inside moisture. Includes storage bag, rear ladder cap and tie-down rope. Elasticized corners for fast and easy fitting. 3-layer polypropylene top repels rain and snow, yet vents inside water vapor out. Preventsmold, mildew and ice buildup. 3-year limited warranty. Fits 28ft. to 30ft. RVTriple-layer polypropylene top and polypropylene sidesFullheight zippered access panelsElasticized cornersAir ventsIncludes storage bag, rear ladder cap and tie-down rope"
Manufacturer: Classic
SKU: 453029
Category: Tarps + Covers

Heavy duty jack is strong enough to even handle rail and bus work! 90-140 PSI with extension screw. Long T handle for positioning andtop mounted jack release valve on the handle allows jack operation at any handle positon. Self-retracting ram means no manual lowering of jack. Safety bypass system prevents cylinder damage and extension screw gives added height when necessary.
Manufacturer: Northern Industrial Tools
SKU: 144340
Category: Automotive

One pound Glass Compound is enough to recondition several windshields. Use with Glass Polishing Wheel (40011 A). First mark the damaged area, mix the Glass Polishing Compound with water, attach the Glass Polishing Buff to your drill or low-speed polisher (1500 rpm), dab on the Compound and keep the wheel moving and wet. The Pro Kit (40011) includes: Special Glass Polishing Wheel (2 1/2" diameter x 1" thick), 1/4" adapter (for use with your electric drill), One pound of Glass Polishing Compound, and instructions. The AutoGlass Sealant (34017 ZC) helps stops water leaks.
SKU: 40011 B
Category: Styling, Care & Custom Plastic & Glass Repair Windshield repair

"This 1-1/2in. rotary hammer delivers the same outstanding drilling performance as the fully featured models but with fewer features at a lower price. A soft-shift stop rotation knob permits the operator to smoothly change from hammer-with-rotation mode to the hammer-only mode. The bit locking system features one-handed click-in bit insertion. Apre-set clutch protects against sudden motor overloads. Quick–change bit holder Powerful 11.0 Amp motor with Electronic Feedback Control Circuit385 RPM; 3,400 BPMSDS–Max® drive1–1/2in. solid bit capacity, 6in. thin wall core bit capacityStop rotation mode for chipping and self drilling anchors24 chisel positions8ft. rubber cordExtra–large steel carrying case holds 23in. long bitsModel 5314–21U.S.A."
Manufacturer: Milwaukee
SKU: M0120
Category: Power Tools

This Buffing Kit features 1/2" wide buffs (10" diameter) designed to hold more compound and last a long time, a complete set of buffing compounds so you will have the proper abrasive for any project, a video, and complete instructions. You can get professional results buffing stainless, brass, aluminum, pot metal, and plastic using this Buffing Kit. Kit includes: Buff Rake, Dust Respirator, Face Shield, Gloves, six Compounds (one each of Emery, Stainless, Tripoli, Plastic, Jewelers Rouge, and White Rouge), eight BuffingWheels (two each of Sisal, Loose, Spiral, and Canton Flannel).
SKU: 13016
Category: Metal Buffing & Finishing Buffing Buffing Kits

"Feature-filled deep fryer with innovative “cool zone” technology that keeps cooking oil fresher so food tastes better and oil lasts longer. Smartly designed safety cutout feature ensures maximum safety. 1800 Watts of power gives you 3 temperature settings for cooking all types of food, and the LED digital timer counts down and alerts you when cooking time is complete. Food basket with folding handle has dual basket positions. Stainless steel exterior, breakawaypower cord, built-in cord storage and plastic lid for storage use."
Manufacturer: Nesco
SKU: 168602
Category: Food Processing

Proper Purple 1-Shot Enamel covers with a single stroke. Lead free, for safe easyapplication to virtually any surface.
SKU: 105 37151Z
Category: Auto Body Pinstriping / Airbrushing Pinstriping Paints

Eastwood Buff Motor with Pedestal - Perfect for the budget minded enthusiast, rugged enough for use everyday! This Eastwood motor features a sealed case design for durability. The 3/4 HP includes a 6' 110 VAC power cord. Imported. One-year warranty. The included (13162) Pedestal brings the buff to a comfortable work height. The (13232) Treated Ventilated Buff 10" produces faster results with cooler buffing action.
SKU: 13309
Category: Metal Buffing & Finishing Buffing Motors / Accessories

These paints are formulated to protect and duplicate the original look of many metal parts on your car. Detail Gray is used for stamped or machined steel, rough cast aluminum and pot metal. Also for die-cast parts like alternatorand distributor housings. Aluma Blast provides protection and durable finish for smooth-cast aluminum components. Spray Gray protects cast iron parts and maintains their fresh cast factory appearance. Protected up to 300 degrees by these paints, metal parts will keep that brand new look for a long time.
SKU: 10110 Z
Category: Specialty Coatings Detail Coatings Metal Finishes

Includes electric 1/8"NPT sender and 1/4" NPT fitting.
SKU: 74520
Category: Performance & Tune-Up AutoMeter Sport-Comp

"All Purpose Floor Lock Foot operated lock. Solid welded steel, zinc chromate plated. Non-slip rubberbase pad. Plate: 4 1/2 in.L x 4 3/8 in. W bolt holes: 3 in. to 3 5/8 in. L, 2 5/8 in. to 3 in.W"
Manufacturer: Northern Tool and Equipment
SKU: 152532
Category: Shop Supplies

No shielding gas gas required with fluxcore wire. For best results clean weld thoroughly to prevent paint blistering.
SKU: 19278
Category: Metal Shop Welding Welding Tools & Accessories

"3000 gallons, 2–ft. depth. Includes Savio Skimmerfilter™, 8.5 in. faceplate/weir, Savio waterfall filter, 2 in. x 25 ft. flex tubing, 20 ft. x 25 ft. 45mil liner, 10ft. x 50 ft. underlayment, Water Master 4000 pump, 16–oz. foam, discharge kit, patch, wet weld primer and glue, knife valve and 1 1/2 in. x 5 ft. flex hose. Truck ship. Factory shipped."
Manufacturer: Savio
SKU: 108991
Category: Outdoors

"US Dent Tools—The Industry Leader in Automotive Reconditioning. US Dent Tools equipment and tools are the first choice of reconditioning professionals across the country. Manufactured to the most exacting standards, they are available in an extensive variety of lengths, diameters, angles and combinations. Crafted from high–tempered carbon spring steel, they are clearly the most effectivetools for the job. AC/DC–powered mobile dent light has 25–foot power cord and 12in. x 6in. lightGooseneck holds the dent light 17in. above its 4in. suction cup baseUses four 8–Watt T5 bulbs (included)Model AC23U.S.A."
Manufacturer: USDenTools
SKU: 18891
Category: Automotive

Moisture and oil separators are an unbeatable combination for helping you get professional results. Together, they will remove 99.9% of the contaminates that can ruin paint jobs and painting equipment. The (34104) Coalescing Oil Separator filters particles as small as.01 microns. The (34103) Moisutre Separator ensures dry air to the gun and takes out particulates down to 40 microns. Both have 1/2" NPT ports and handle up to 150 psi. Buy both as a set (34106) forbest results.
SKU: 34104
Category: Auto Body Painting Paint Gun Accessories

Use the Right Masking Tape - Hardware store tapecan leave adhesive behind and lift when paint is applied, leaving overspray on trim and a rough parting line. 3M Green Tape is preferred by professional refinishers for superior hold and easy removal. Includes 3 rolls of 3/4" and 1 roll of 2" tape. The 20 Piece Mixing and Straining Set (34240) helps assure even paint consistancy.
SKU: 34245
Category: Auto Body Painting Paint Prep

"Set comes with 3, 4, 5, 6, 7, 8, 9 and 10mm hex bit sockets. Sockets feature 30° working angle for improved access to hard to reach fasteners. Packaged on a metal clip rail for easy access. Model #SK19748. U.S.A."
SKU: 1517285
Category: Hand Tools

Considered to be the finest quality tool chest for serious enthusiasts, this rolling tool cabinet is constructed with 16ga powder coated steel, andfeatures a reinforced top that doubles as a work surface. Heavily reinforced drawers with all ball bearing glides, sealed permanently lubricaed 935lb castors, tubular cam locks, and a rugged inner structural core ensure that this unit wil exhibit extreme durability. Edges are smoothed and radiused. Includes drawer liners. Cabinet measures: 30"W x 18.25"D x 40.75"H
SKU: 11147
Category: Tools & Equipment Shop Equipment Storage

This kit is for a 1970 Charger R/T and contains Side Pinstripes Kit - (Door Scoops to Rear), squeegee and instructions. Decal coloris black.
SKU: 10803 001
Category: Styling, Care & Custom Phoenix Graphix Dodge

Dependable, well-balanced, long-wearingwheel for coarse buffing and cutting on all materials. Made from selected white cotton material with continuous spiral sewing with 3/8" spacing. Face is 1/2", 40 ply. Use Tripoli (13135) or Stainless Steel (13136) compound with this wheel.
SKU: 13035
Category: Metal Buffing & Finishing Buffing Buffs

"The Tilt-Lok™ handle isthe most revolutionary concept for circular saws in years. The eight position cushioned top handle adjusts to any cutting application maximizing comfort and control. Weighing in at 10.4 pounds and delivering 3.25 maximum horsepower, this tool offers the best power to weight ratio in the industry. Helical steel gears and a 22 amp switch are just two of the features that ensure the Milwaukees reputation for durability. Lightest, quietest, most powerful circular saw, cuts headers, microlams and wet lumber with easeMain handle adjusts and locks in 8 positionsBevels to 50° with excellent blade visibilityOne-touch spindle lock; depth adjustsIncludes framing/rip carbide blade, blade wrench, and carrying caseModel 6390-21"
Manufacturer: Milwaukee
SKU: 110864
Category: Power Tools

Tube-type 4.10/ 3.50 x 4 low speed tire is mounted on a 2-piece steel wheel. 5/8in. ball-bearing bore. 300-lb. capacity. Offset tire Hub Width: 2 inch Straight stem Bearing to Bearing Width: 2 inch Bearing Mounted 1 1/2 inch from center of bolt to center of hub 4 bolts evenlydistributed about the circumfrence
Manufacturer: Northern Tool and Equipment
SKU: 13431
Category: Tires + Wheels

The world's largest antique, classic,vintage, muscle, street rod, and special interest auto marketplace.
SKU: 61082
Category: Tools & Equipment Electrical & Diagnostic Books & Videos

LimitedAccess Distributor Wrench 3 Piece Set. Includes 7/16", ø" & 9/16" sizes in various configurations to fit many distributor hold down bolts, inaccessible to standard wrenches. Made in USA.
SKU: 11129
Category: Performance & Tune-Up Ignition Distributors

"Build your own smoker/pit and grill to save money and give you just the kind of smoker you want! Complete plans provide clear direction to build a tested-and-proven professional 32in. x 20in. smoker/pit and grill. Includes full bill of material, complete supply and cut list, clear dimensions and detail, welding tips and 3D assembly instructions with enlarged viewsBuilds a 32in. x 20in. double-rack smoker,21in. x 20in. firebox and direct fire grill, adjustable smoke dampers, built-in wood rack, 20in. wagon-style wheels and more"
Manufacturer: Northern Tool and Equipment
SKU: 228530
Category: Food Processing

Kandy Koncentrates are used to richen any of our Kosmic Kolor Urethane Enamel Kandys or Kustom Kolor Acrylic Lacquer Kandys. Kandy Koncentrates are perfect for motorcycles, small parts and touch ups when speed is a factor. Use to tint Kandys, strenghten Kandys for faster coverage on frames, door jambs, under trunk and hood areas. Top coats may be cut in half with Kandy Koncentrates. Maybe added to Intercoat Clear (for urethane enamel topcoats) or Sunscreen Clear (for acrylic lacquer topcoats), for multi-colored Kandy tapeouts with min build. Dry fast, so many colors may be applied in one day. Long shelf life.
SKU: 8545Z 005 8OZ
Category: Auto Body Painting House of Kolor Paints

Original style powdercoated Chevelle SS style Wheel. Quality accurate reproduction of the original. Wheel size is 15"x10" with 4-1/2"to 6" backspace. Configuration is 5-lug with a 4.75 inch bolt pattern. Made in the USA. This is a special order wheel and is not returnable.
SKU: 62196
Category: Styling, Care & Custom Specialty Wheels

Connects gardenhose faucet to hose reelFemale swivel end; male threaded end4ft. hose; U.S.A.
Manufacturer: Coxreels
SKU: 228554
Category: Grounds Maintenance

"Pipe wrench offers one-handed operationfor speed and convenience. Ratchets quickly to work surface. Broached teeth work on galvanized, PVC and copper. 43% lighter than a standard 14in. cast iron pipe wrench. Includes FREE curved-jaw locking pliers with wire cutter. U.S.A."
Manufacturer: Irwin Vise Grip
SKU: 96554
Category: Hand Tools

This pint of Satin Black Coating produces a custom look for manifolds and headers. Easy brush-on application with the included disposable brushes or sprayable as is using ourPro Portable Sprayer (10387Z) or your jamb gun.
SKU: 10363Z
Category: Specialty Coatings Underhood Coatings High Temp / Exhaust Systems

Grey epoxy powder coated forks. 2 1/2in. to 3in. x 3in. to 3 5/8in. bolt hole spacing. Top plate size: 4in. x 4 1/2in.. U.S.A. V-grove:7/8in.W x 7/16in.DWheel Size: 4in. x 2in.Mount Height: 5 5/8in.Capacity: 1000 Lbs.Top Plate: 4in. x 4 1/2in.Bolt Pattern: 2 1/2in. to 3in. x 3in. to 3 5/8in.Wheel Type: Rigid
Manufacturer: Fairbanks
SKU: 189290
Category: Casters

"The Ultimate Organizer Line Trimmer Racks are vinyl coated to protectthe power pole equipment. The flat pin design prevents equipment from rolling, which eliminates fuel spills. Each piece of equipment is lockable for added security. U.S.A."
Manufacturer: Green Touch
SKU: 1438611
Category: Storage

Make old, road-worn aluminum or Mag wheels look new, or create a custom look. This Kit provides the materials and detailed instructions needed to refinish four wheels, or more at roughly the cost of having just one wheel professional- ly refinished. This Kit contains: 3 lb bags (one each) of 80, 220, and 320 grit Greaseless Compound, three 4" Spiral Sewn Buffs with 1/2" hole,one wheel arbor, one tapered Goblet Buff, and a Buff Taper for 1/4" drill chucks.
SKU: 13103
Category: Metal Buffing & Finishing Buffing Buffing Kits

Drill a "straight" hole thru tubing or around stock. Just clamp the machi ned aluminum drill jig onto 1" to 1 3/4' diameter. Features hardened inserts for 1/4", 5/16", 3/8", and 1/2"holes. Madein the USA.
SKU: 28403
Category: Tools & Equipment Shop Tools Metal Working Tools

Kwikure Epoxy Primer is a hi-solids catalyzed primer that meets all current air regulations. Itis a National Rule and SCAQMD Rule 1151 compliant primer. This primer is designed to be the first primer applied to bare steel, aluminum, fiberglass,magnesium and galvanized surfaces. It's tenacious adhesion, hi-build,and excellent durability, water and corrosion resistance makes it a logical choice for the basis of a long lasting paint job. May be reduced up to 10% with RU-300 (8529ZP 004 QT) for improved flow out and sprayability.
SKU: 8501ZP 004 QT
Category: Auto Body Painting House of Kolor Paints

"Original trailer door organizer works great for any enclosed trailer and holds up to 27 spray cans, oil quarts and much, much more. Paper towel organizer keeps your rags within handy reach whenever you needthem. Spring-loaded to prevent unrolling. Fold down front provides convenient work area. U.S.A."
Manufacturer: Northern Tool and Equipment
SKU: 348990
Category: Automotive

Mix Paints Accurately:Automotive Finishes Cost Enough. Minimize the risk of inaccurately mixing a batch of paint. This assortment of mixing containers (13 pieces from pint to 5 quarts) is graduated to match popular mixing ratios. Much more accurate than trying to read a mixing stick in a dark metal can. Easy to clean mixing cups feature dripless pour (no metal lip to pour over). Set includes one each of the following: 1/4pt cup, 1/2pt cup and lid, 1 pt cup and lid, 1 qt cup and lid, 2 qt cup and lid, 2 1/2 qt cup and lid and 5 qt cup and lid.
SKU: 34131
Category: Auto Body Painting Paint Gun Accessories