2-1/16" Dual Pod Toyota Supra 1993-96 (RHD) @ Tools, Equipment & Painting online store

"Plug is UL listed,impact-resistant. U.S.A."
Manufacturer: Reliance Controls
SKU: 31210
Category: Generators

2 ton capacity floor jack is great for your garage or shop. Extends from 5in.to 13in. and features a 7in. travel.
Manufacturer: Northern Industrial Tools
SKU: 144993
Category: Automotive

Heavy Duty Bumping Hammer - Heavier headfor straightening thicker metal used for truck fenders, braces and more. Includes 1-1/4" round and 1-3/16" square faces. Head measures 4" long. Weighs 1.1 lbs.
SKU: 31320
Category: Auto Body Body & Fender Body Hammers

"USDA/FDA approved tote can be used in food industries for use with meats and poultry, in manufacturing and transportation. Strong and durable tote can hold up to 100 lbs. Lightweight and economical tote is easy to clean. Rolled top rim for comfortable grip. Rounded corners add strength to stress points. Totes nest when empty and jamming is prevented with top rib. Eight 1/4in position drill holes on bottom allow for drainage. U.S.A. 24 1/2in x 19inx 9 1/2in Gray"
Manufacturer: Quantum
SKU: 278560G
Category: Storage

Corrosion-resistant steel tubing like OEM on most cars. Use with our tubing bender(49002) and flaring tool(49001) to create replacement or custom lines. Includes.028" thick wall tubing, 6 master cylinderfittings, and 10 short wheel cylinder fittings. For SAE doulble-flare applications.
SKU: 49067
Category: Performance & Tune-Up Brakes & Suspension Brake Tools

Devilbiss Paint Gun Starter Kit - Devilbiss offers a smarter alternative to no-name guns. This set includes a largeHVLP gravity spray gun with 1.3mm fluid tip for top coats, extra 1.8mm fluid tip for primers and heavier materials and a 600 cc (20 oz) gravity cup (requires 13 cfm at 30 psi); mini- HVLP detail spray gun with a 1.0mm fluid tip, 130 cc (4 oz) gravity cup (requires 8 cfm at 30 psi), tool kit, accessories, and instructions. Packaged in blow-molded case with handle.
SKU: 34566
Category: Auto Body Painting Paint Guns

Oxygen Sensor KitFor air/fuel ratio (includes sensor, weather pack harness, and weld fitting).
SKU: 74179
Category: Performance & Tune-Up AutoMeter

When split seconds count you only have a fraction of thattime to monitor your instruments. Ultra-Lite Full Sweep electric gauges are designed for the professional racer. 270 degree dial face provides the ultimate in clear visibility when you need it most. Gauges have the finest in high-end sending units for unsurpassed accuracy and dependability. They stand up to the pressure and you stay cool! Includes 1/8" NPT sender and 8' wiring harness.
SKU: 74618
Category: Auto Accessories and Gifts

Faster Cutting, Longer Lasting Treated Buffs - Our new line of treated buffs work faster, longer than non-treated buffs. Suitable for faster material removal, these wheels take the place of standard mini buffs. Used with Stainless Steel Compound (13001) or Tripoli Compound (13135). Great on hard or soft metals! Thisset includes 4 each of the 1", 1-1/2" and 2" Treated Mini Buffs.
SKU: 13241
Category: Metal Buffing & Finishing Buffing Buffs

Auto Meter's new selection of 1 1/2" fuel ressure gauges mount conveniently in the engine compartment for easy adjustments on fuel system, regulators, and carburetors. The gauges are availible in 0-1, 0-60, and 0-100 PSI ranges and can be mounted into any fuel pressure regulator, line, or connector with a 1/8" NPT pressure port. Availible with either a black or silver dial face to match favorite line of Auto Meter High Performancegauges, these fuel pressure gauge will show your flow with precision!
SKU: 74157
Category: Performance & Tune-Up AutoMeter Sport-Comp

"‘Arrow-Notch’ system provides easy free chaining and 360° handle rotation. Reliable disc brake holds the load in free chain mode. Premium alloy chain. Hardened swivel-latch hooks have throat openingsof 1.1in., 1.3in. or 1.7in., respectively. Short handle stroke requires less than 76 lbs. of force. Zinc-nickel-chrome plated finish. This lifts the load 10 feet. Capacity, (metric tons = lbs.) 3/4 = 1650 Head room (between hooks): 12 5/8in."
Manufacturer: Ingersoll Rand
SKU: 149800
Category: Material Handling

SHIMRIN Designer Pearls (PBC) are universal base coats that may be cleared fora final finish, or used as a base coat for Kandys or Pearls. Due to their unique chemistry make-up, they may be top coated with either acrylic lacquer or urethane enamel. These Designer Pearls are usually applied over 8514ZP Shimrin White BC-26. See the Materials Guide pgs. 67-68 of the Tech Guide or our website for required quantity.
SKU: 8507ZP 005 QT
Category: Auto Body Painting House of Kolor Paints

Add a new dimension of style to your ride with carbon fiber mechanical gauges. Crisp aluminum bezel surrounds actual carbon fiber face with attractive yellow accents. Durable bourdon tube gauge mechanism ensures unsurpassed accuracy and smooth pointermovement in the heat of racing. Includes 1/2" NPT fittings, 6 ft. capillary tubing.
SKU: 74769
Category: Auto Accessories and Gifts

Hardened stainless steel nozzles. Nozzle Size: 4.0 Spray Pattern: 0°
Manufacturer: GP General Pump
SKU: 25302
Category: Pressure Washers

Usedstorge tank made of strong plastic with 8 in. screw cap and 2 folding handles.
Manufacturer: Northern Tool and Equipment
SKU: 22000
Category: Grounds Maintenance

"Hi mount right (facing the PTOshaft) discharge muffler, for our #60242 and 60243 engines."
Manufacturer: Honda Engines
SKU: 60242R
Category: Engines

Includes 1.2, 1.3, 1.4 mm tips for any coating, 32 oz. aluminum cup with lid, air adjusting valve, lube, fluid filter, and gun hook. Efficient air cap for better transfer efficiency, 3" to 12" fan and superior finish. Chrome plated body, stainless fluid tip/needle. Requires 9 cfm at 30 psi.Air cap exceeds 10 psi (not HVLP but still legal in many areas). One year warranty.
SKU: 34227
Category: Auto Body Painting Paint Guns

"12 Volt sealed lead acidl generator batterywith 350 Cold-Cranking Amps and an Amp/Hour rating of 33. For use with Item#s 165920, 165922, 165926, 165938, 165957 and 165958."
Manufacturer: Northern Tool and Equipment
SKU: 31868
Category: Generators

Addthe brilliance of these top quality enamel paints to your vehicle's design. They can be applied by airbrush, roller, or brush. The choice paint of professionals for pinstriping and lettering becuase of their excellent flow, and durable, long-lasting finish.
SKU: 105 37110Z
Category: Auto Body Pinstriping / Airbrushing Pinstriping Paints

"Keep the hot sun and weather off your expensive tires and wheels for lasting beauty. Rugged, snow white vinyl covers resist and repel water. Soft backing wont scratch. Sized for easy-on, easy-off. Fold for storage. Pack of 2 covers. Fits Tire Diameter: 32 to 34.5in. 3 Year Warranty"
Manufacturer: Northern Tool and Equipment
SKU: 450664
Category: Tarps + Covers

Original style Oldsmobile SS-1 Wheel with black outer portion. Quality accurate reproduction of the original. Wheel size is 15"x8" with 4-1/2" backspace. Configuration is 5-lug with a 4.75inch bolt pattern. Compatible with disc brake applications. Requires trim rings. Made in the USA.
SKU: 62142
Category: Styling, Care & Custom Specialty Wheels Oldsmobile Wheels

Armature operates in oil system so impact is cushioned and noise is reduced. Seal wear is eliminated for longer valve life. Moisture and dirt-resistant molded coils. Complete with bolt kit and electrical junction box. Spool Style:3-Position Spring Center Tandem Size: D03 GPM: 10 12V DC
Manufacturer: Northern Tool and Equipment
SKU: 202305
Category: Hydraulics

"Solar powered deterrentemits a vibrating sound underground every 30 seconds to repel moles, voles and shrews. Internal NiCad battery is recharged daily in sunlight for continued night operation. Easily stakes into ground for installation and removes for lawn maintenance. Note: Not for use on gophers"
Manufacturer: Northern Tool and Equipment
SKU: 168361
Category: Grounds Maintenance

Wheel Size: 8in.x 2in. Capacity: 1200 Lbs. Polyurethane Wheel
Manufacturer: Fairbanks
SKU: 18239
Category: Casters

Reaching over a radiator to open and close a petcock, especially a rusty one, can be a real belly-buster, as well as a knuckle-knocker. Simplify the task with this petcock socket. Two-slot design matches most types of petcocks for radiators, engine blocks, air compressors, storage tanks, etc. Requires a 1/4" drive ratchet or 7/8" wrench.
SKU: 43071
Category: Performance & Tune-Up Drivetrain Engine Tools

This unique product applies like typical plastic fillers, yet is made with fine aluminum particles, which helps make for a stronger repair. Waterproofso there is little chance of corrosion under the patch area. Heat resistant properties make it ideal to use before powder coating. (Must be preheated before powder application) Apply right to bare metal to smooth minor ripples in body work. Hardener included. Use Eurosoft Glazing Putty (31079ZP) as a final step to fill pinholes and small imperfections before painting. Store in a cool dry place.
SKU: 10021 ZP
Category: Auto Body Panel Repair & Prep Fillers & Seam Sealers

The carbide Blast Nozzle offers superior durability compared to steel and ceramicnozzles. For best results use this Carbide nozzle with a Carbide air jet. The Carbide Air Jet (22080B) is available separately.
SKU: 22080 A
Category: Rust Treatment Rust Removal Abrasive Blasting

Cowhide gloves have double leather palm andindex finger. X-Large size.
Manufacturer: West Chester
SKU: 8481
Category: Gloves + Apparel

"9 preconfigured units of heavy-duty, 14-gauge steel have a black baked-enamel coating ensuring years of use. Three different heights to choose from: 24in., 48in. and 70in. U.S.A. Factory shipped. Size 16in. D x 23 5/8in. W x 70in. H Ivory"
Manufacturer: Quantum
SKU: 278576I
Category: Storage

"Hypoallergenic 16 in. x 16 in. microfiber tack cloth is great for dry tacking/dusting. Attracts and traps even the smallest particles. Wipes lint free, contains no adhesive residue. Reusableand machine washable."
Manufacturer: Norton
SKU: 1599740
Category: Shop Supplies

3/8" Drive Positionable Serpentine Belt Tool - Use to release tension on front wheel drive and other vehicles with serpentine belt self-adjusting idler pulleys. Also suitable for other difficult to reach underhood areas. Includes 3/8" drive positionable bars with 15mm, 16mm and 18mm socketsand 13mm, 14mm and 15mm crows foot wrenches. Made in USA.
SKU: 46197
Category: Tools & Equipment Shop Tools Engine Tools

All HotCoat Powders are exclusively formulated for the HotCoat System. They are optimized to promote static charge for uniform coverage and finish. All are UV and fuel resistant. Packedin 8 oz. net wt. cans.
SKU: 10095
Category: HotCoat Powder Coating Powders Specialty Colors

An old-time secret for removing dents and/or smoothing body work onhand fabricated panels. The serrated face works in two ways: it shrinks the stretched metal, and highlights high/low spots that require hammer and dolly work. When used as a slapping hammer, with a dolly, files shrink metal to remove high spots. The files can also be used to remove metal.
SKU: 31046
Category: Auto Body Body & Fender Files / Spoons

Here's a new approach to flanging patch panel areas. This tool uses two gear-driven rollers, which can be adjusted to accommodate steel or aluminum from 24 to 18 gauge. Toturn the rollers, simply attach your ratchet wrench and 5/8" socket. The hex drive turns a gear that interlocks with the rollers. Very smooth action creates a tight-stepped flange. Made from drop-forged steel with heat treated gears. Handles are 11" long. Made in England.
SKU: 31060
Category: Auto Body Body & Fender Flangers

Large Polyethylene Clamshell Blast Cabinet - Heavy wallpolyethylene shell mounted on heavy duty 14 gaugesteellegs, Includes trigger operated gun with one 1/4" nozzle (requires 15 cfm at 80 psi). Working dimensions: 46" wide by 22" deep by 22" tall. Overall dimensions: 60" h x 48" w x 48"d. Includes 12" x 24" lexan viewing window. Requires a 1 hp or larger wet/dry vac to us as a dust collector. Weighs 200 lbs. Internal capacity is 400lbs. Minimum assembly required. Instructions included. 200 lbs. Minimum assembly required. Instructions included.
SKU: 22117
Category: Metal Buffing & Finishing Abrasive Blasting Blast Cabinets

"Easily locks engine in place while removing harmonic balance pulleys, camshaft gears or replacing timingbelt or chain. Simply remove a spark plug, install Crank Stopper and rotate engine until piston hits it. No more trying to hold the flywheel teeth. Brass end protects piston from damage. Works with 14mm threads. U.S.A."
Manufacturer: Northern Tool and Equipment
SKU: 403104
Category: Automotive

String knit gloves have latex-coated palmand fingertips. X-Large size.
Manufacturer: West Chester
SKU: 8490
Category: Gloves + Apparel

This is a five-gauge style insert patterned off of a 1934 Ford. Pattern uses 1/2" swirl on.063" aluminum.Center speedometer hole3 3/8" with four holes 2 1/16" for additional gauges. Size approximately 6 3/8" tall and 12 7/8" long.
SKU: 52389
Category: Metal Shop Fabrication Accessories

"Fits virtually any 1/2in. NPT air line system 2-125 PSI regulator, 0 -160 PSI gauge, metal bowl Pressure controland continuous lubrication Auto overnight drain to prevent moisture damage to air tools Easy to assemble; U.S.A."
Manufacturer: Milton
SKU: 159672
Category: Air Tools

Authentic reproduction of the original center caps used in 1968-1968 Ford Mustang, Torino and Fairlane with theplain center caps.
SKU: 62017
Category: Styling, Care & Custom Specialty Wheels Ford Wheels

Exhaust Wrap from DEI - Increase exhaust gas velocity for improved power by wrapping exhaust headersand connector pipes. This fiberglass composite material endures exhaust temperatures while keeping the heat in the pipe. Reduces underhood temperatures. This 1" wide by 50' long roll works great for wrapping tight radius bends. Use the (70305) Stainless Steel Locking Ties to hold wrap in place. Made in the USA.
SKU: 70301
Category: Performance & Tune-Up Drivetrain Heat Control

3-3/8" 80 mph Z-Series Speedometer(M)
SKU: 74346
Category: Performance & Tune-Up AutoMeter Z-Series

These gauges display youroperating pressure. Bottom attachment is 1/4in. threaded. A liquid-filled gauge resists vibration and lasts longer. 2 1/2in. face. Item 4070 and 4076 have stainless steel case. Type: Unfilled PSI: 3000
Manufacturer: Northern Tool and Equipment
SKU: 4060
Category: Gauges

Super-duty 3/8in. air ratchet; “The Knuckle Saver” Reactionless ratchet has a unique reactionless mechanism — it absorbs kickback when the nut runs tight 300 RPM; 50 ft.-lbs. torque Rear exhaust 4 CFM air consumption; 12 CFM @load 1/4in air inlet; 5/16in. minimum hose 3/8in. bolt capacity Model IR111
Manufacturer: Ingersoll Rand
SKU: 158311
Category: Air Tools

"Ideal for mounting to the front or back walls of houses, buildings or shops. Exclusive “interlock” design means the reel can be removed from the wall in just seconds. Mounts quickly to almost any vertical surface including masonry, 16in. stud walls, wood posts and steel beams. Stores and maintains up to 150 feet of5/8in. water hose. 2 year limited warranty. U.S.A. Factory shipped. 4 ft. inlet hose is crimped to brass swivel for leak proof designDurable high grade steel constructionSolid brass 3/4 in. UltraLife swivelWhite"
Manufacturer: Rapid Reel
SKU: 160144
Category: Grounds Maintenance

ELECTRIC WATER PUMP RELAY KIT #50106 - Kit provides constant voltage to maximizecooling efficiency and protect the main electrical system from damaging amperage overloads.
SKU: 60156
Category: Performance & Tune-Up Electrical & Diagnostic Relay Kits & Connectors

Long-lasting zirconia abrasive discs take the place of resin fiber discs and grinding wheels. Help make weld joints almost undetectable and reduces need for final filler. Flap design runs cooler to reduce panel warping and won't gouge metal like ordinary grinding discs. Each flap discwill out last approximately 15 resin discs. Order 1-2 grits coarser than resin fiber discs. Use on your high-speed grinders.
SKU: 19060
Category: Metal Shop Fabrication Prep & Finishing

Fits all1/4in. and 3/8in. drills. Great for sharpening push mower blades and other sharpening applications. U.S.A.
Manufacturer: Unifit
SKU: 80182
Category: Grounds Maintenance

"Isolates system segments without disrupting other segments. Brass body with plated steel ball,Teflon® seals and 1/4in. plated turn handle. NPT Size: 1/2in."
Manufacturer: Northern Tool and Equipment
SKU: 159683
Category: Air Compressors

Easily Maneuver Parts for Painting orPowder Coating - Apply paint or powder evenly to hanging parts without the need to lift and relocate the hanging hook. Ball bearing swivel hook allows part to be positioned perfectly. Supports up to 300lbs. A must for coating wheels.
SKU: 43341
Category: Specialty Coatings Wheel & Suspension Coatings Wheel

"9 preconfigured units of heavy-duty, 14-gauge steel have a black baked-enamel coating ensuring years of use.Three different heights to choose from: 24in., 48in. and 70in. U.S.A. Factory shipped. Size 8in. D x 23 5/8in. W x 28in. H Gray"
Manufacturer: Quantum
SKU: 278571G
Category: Storage

A 4,400lb lifting capacity is what distinguishes this engine crane from mostof the others available. Ideal for lifting and positioning engines and transmissions in both cars and trucks. Features heavy duty grasp hook with safety latch, roller bearing swivel casters with safety brakes and fully adjustable boom length. Boom adjusts from 49-76 inch extension. Capacity is 1,100lbs at maximum extension. Base is adjustable from 60-88 inches in length.
SKU: 10282
Category: Tools & Equipment Shop Tools Unique Tools

"Hollow–core handle provides maximum shock absorption anddurability. Exclusive PVC slip–resistant, air–cushioned grip. Full–polished head. Limited lifetime warranty. U.S.A."
Manufacturer: Vaughan
SKU: 55918
Category: Hand Tools

The correct color and quality engine paint is the foundation of a well detailed engine compartment. Quick drying acrylic lacquer, high 80-90% gloss finish is heat resistant to 250 degrees F. Colors shown are approximate. 12 oz. net wt. Enough to cover 6 square feet. Buy 2 ormore and SAVE!
SKU: 10060 Z
Category: Specialty Coatings Underhood Coatings Engine Paints

2 1/16" 16E/158FZ-Series fuel level gauge(E)
SKU: 74340
Category: Auto Accessories and Gifts

Original type wheel with chrome outer as used on the 1967-1968 Mercury Cougar. Quality accurate reproduction of the original wheel. Wheel size is 15"x7" with a 4-1/4" backspace. Configurationis 5-lug with a 4.5 inch bolt pattern. Compatible with disc brake applications. Made in the USA.
SKU: 62043
Category: Styling, Care & Custom Specialty Wheels Ford Wheels

"Provides face & hearing protection while clearing vegetation or trimming with power tools. Lightweight, metal mesh facescreen flips up when not in use.Earmuffs are adjustable. U.S.A."
Manufacturer: AO Safety
SKU: 181932
Category: Safety

Ideal for working on large pieces, with great flexibility around the buffer. Wide base bolts to your shop floor, and the top is pre-drilled for easy motor mounting. Base measures 15 3/4" wide x14" long. Overall height is 32 7/8". THIS ITEM MAY TAKE 10 DAYS TO 2 WEEKS FOR DELIVERY
SKU: 13071
Category: Metal Buffing & Finishing Buffing Motors / Accessories

Our heavy-duty motorcycle painting stands: Are completely adjustable for many different uses. Allow access to every inch on hundreds of parts. Provides sturdy mounting of motorcycle tanks or fenders. Comes in three ready-to-go pieces for easy use and storage. Are ideal for intricate artwork, sanding,buffing or polishing. Makes a great workbench support.
SKU: 34213
Category: Auto Body House of Kolor Books, Videos, Etc.

"These unique bins have the ability to interlock horizontally and vertically. Available in 3 sizes,these bins allow you to create your own customized storage system. Sold in cartons only. U.S.A. Bin size 4in x 4 1/2in x 6in 5 per carton. White"
Manufacturer: Quantum
SKU: 278568W
Category: Storage

Braided Stainless Steel Hose, 3ft. #4, 3/16" ID FittingsFor use with mechanical pressure gauges. Recommended for use with fuel pressure gauges.
SKU: 74386
Category: Auto Accessories and Gifts

Cut Closer to Minimize Grinding, Cut to within 1/4" above flushinside corners, when altering bracket locations drive spins 4" Cut-Off Wheels (up to 1/8"thick) with 3/8" center hole at up to Max RPM 15,000.1/4" NPT. Requires 12 cfm at 90 psi.
SKU: 31297
Category: Tools & Equipment Shop Tools Body & Fender Tools

FAN-THOM ELECTRIC FAN RELAY KIT #30101 - Inexpensive protection for yourelectric fan! Relay kit provides constant voltage while protecting from voltage and amperage spikes and keeps fan from feeding back through the system. An absolute necessity if adding an on/off switch to your electric fan circuit.
SKU: 60091
Category: Performance & Tune-Up Electrical & Diagnostic Relay Kits & Connectors

"Bins are FDA approved tote nests when empty or can be turned 90ø to stack. Easy access to items when stacked.Ideal for production, assembly and order picking. Easy to clean. Built in handles and bottom grooves make handling easy. Holds up to 100 lbs. Eight 1/4in position drill holes on bottom allow for drainage. U.S.A. Cart measures 27in x 19in x 41in 900-lb. capacity Bin size 25 1/2in x 16in x 8 1/2in 5in Rubber Wheel Casters Gray"
Manufacturer: Quantum
SKU: 278563G
Category: Storage

Reusable fitting for female SAE 37. Couples into hose like 50 RCM fittings. Female thread on both ends. Size: 1/4in. Wire: 1
Manufacturer: Apache
SKU: 50RCF4
Category: Hydraulics

"A versatile model for avariety of tasks, from light edge trimming to clearing thicker grass. The E-TECH II engine combines reduced emissions and low noise with a superior power/weight ratio. Hard chromium plated cylinder bore provide increased durability"
Manufacturer: Husqvarna
SKU: 195902
Category: Grounds Maintenance