Northern Industrial Tools Supercut Bimetal Replacement Bandsaw Blade — 64 @ Tools, Equipment & Painting online store

5"Monster Tachometer Cup, for 5" Pedestal mount tachs with 3-3/8" case.
SKU: 74153
Category: Performance & Tune-Up AutoMeter Carbon Fiber

Readings up to 175PSI; 1190 Kpa Trigger inflating control Air release button; 1/4in. inlet
Manufacturer: Northern Industrial Tools
SKU: 1573
Category: Air Tools

"Constructed of heavy gauge galvanized steel with automatic, notch-at-a-time let down release.Two ton capacity. 12-foot cable is about 5 1/2 feet long when looped. Single line pull at 12ft.: 2000 Lbs. Double line pull at 6ft.: 4000 Lbs. Pulling ratio: 15:1 Hook dimensions: 2 1/2in.W x 3in.L"
Manufacturer: Northern Tool and Equipment
SKU: 15062
Category: Material Handling

"Recoil start; Oil Alert and transistorized ignitionThreaded 5/8in. shaft is 2 7/16in. LModel GX160K1TX turns at 3900 RPM2 quart fuel tankIdeal for US made centrifugal pumpsWarranty: 2 year personal use, 1 year commercial Brand: HondaModel#: GX160K1TXHP: 5.5Low Oil Alert: YesStart-Type: RecoilShaft-Type: HorizontalShaft Dimensions (inches): 5/8 x 2 7/16 threaded shaftApproximate mounting base dimensions: 6.38 in. x 3.15 to 3.35 in.Special Feature: Ideal for water pumps, turns at 3900 RPM, 2Qt. fuel tank"
Manufacturer: Honda Engines
SKU: 605913
Category: Engines

"10-packof reinforced wtraight cut-off wheels. Reinforced with high tensile strength fiberglass for safe, high-speed cutting of ferrous metals, stainless steel and more. U.S.A. Diameter: 3in. Thickness: 1/8in. Arbor: 1/4in. Maximum RPM: 23,000"
Manufacturer: Northern Tool and Equipment
SKU: 158768
Category: Abrasives

Posts have non-marring PVC tube cover. Adjusts to 13in. out from side of frame and may be mounted on top of frame for extra height. Fit trailer frames up to 3in. x 41/4in. U.S.A.
Manufacturer: Northern Tool and Equipment
SKU: 450627
Category: Trailers + Trailer Parts

"No center obstructions! Makes it easy to service cars and light trucks. Lifts to 26in. H. Twin padded steel lift platforms are each 18in. x 53in. Automatic locking system. 2 HP, 110/220V power unit draws 17 continuous Amps; requires30 Amp breaker. Truck Ship. U.S.A."
Manufacturer: Bend Pak
SKU: 144662
Category: Automotive

"16in. (400mm) laser level has 2 vials for horizontal and vertical measurements from –90° to 90°. Wavelength of laser: 630–680mm. Working distance: 50m in daylight, 100m in darkness. Output power: <3mW. In both inchand metric scales. Projects with both dot and horizontal line."
Manufacturer: Wel-Bilt
SKU: 377204
Category: Measuring Tools

3-1/8" 7,000 RPM Electric Tachometer. Above tachs operate on 4,6, or 8 cylinder engines with standard, electronic, and most high performance racing ignitions with12 volt power.
SKU: 74093
Category: Performance & Tune-Up AutoMeter

Heavy-duty quality construction. Doesn't collapse or distort tubing. Bends 3/16", 1/4", 5/16" and 3/8" diameter tubing.
SKU: 49002
Category: Performance & Tune-Up Brakes & Suspension Brake Tools

"Designed for heavy dutypressure washing applications such as road film removal, dirt, grease and carbon stains. Cleans exterior rubber surfaces and gutters in concentrated form. 5 gallons. 18% active ingredient. Truck Ship. U.S.A. Removes Road Film House washing degreasing applications Red Clay Cleaning Concrete Cleaning Gutter Cleaning in concentrated form Exterior Rubber Surfaces Biodegradable Mix Ratio 10:1 or 1:1 for heavier applications 5 Gallon pail makes 50 Gallons at 10:1 Ratio"
Manufacturer: NorthStar
SKU: 22371
Category: Pressure Washers

Replacement Electrolyte can be used to replace contaminated solution or for plating largerparts. This Solution contains Sulfuric Acid. HANDLE WITH CARE to avoid skin and clothing contact! Use our Disposable Nitrile Gloves. Pack of 2 Anode Bars (10049 A) recommended to replace used Anodes or for plating larger items.
SKU: 10049 ZB
Category: Specialty Coatings Detail Coatings Plating / Blackening Systems

The Ultra-Lite electric gauges are simple to install and boast the same solid accuracy and smooth pointer movement as other Auto Meter gauges designed for racing. Use74410 fuel level sender not included.
SKU: 74591
Category: Auto Accessories and Gifts

Tubing, fittings and hardware included. Dial Face: 1-1/2" Depth: 1-1/8" Gauges are removable frompanel. Console measures 2 3/8"X 6 5/16" Single gauge 2 5/16"
SKU: 74271
Category: Performance & Tune-Up AutoMeter

"Sizes: 10, 11, 12,13, 14, 16, 17, 19, 21, 22 and 24mm. Storage box. 6 Point"
Manufacturer: Northern Industrial Tools
SKU: 158720
Category: Air Tools

Built for extra lifting and maneuverability for all your load–lifting needs. Each jack is 100% factory tested for reliability and safety. Minimumheight: 5 1/8in.Maximum height: 14 3/4in.
Manufacturer: Torin
SKU: 144864
Category: Automotive

Rear-entry pressure-washing gun has a 36-inch wand thats insulated for yourworking comfort. Hi-lo nozzle holder is complete with hardened stainless steel nozzle. 3000 PSI 40 ft. hose has swivels and bend restrictors plus quick-coupler for attaching to pump. One year limited warranty.
Manufacturer: NorthStar
SKU: 15719711
Category: Pressure Washers

"Stonehas 2 11/16in. outside diameter, 1 1/2in. diameter stepped center hole, 3/4in. high."
Manufacturer: Northern Tool and Equipment
SKU: 156931
Category: Power Tools

Abrasive blasting is the most effective way to clean a wide variety of parts, but how do you keep the blasting media out of the component you are cleaning? Use this Set of 123 assorted size Vinyl Caps and Plugs to protect threads, pipe ends, shafts, etc. while blasting. Quicker and easier than masking tape tokeep paint out of the freshly blasted parts, too!
SKU: 22000
Category: Rust Treatment Rust Removal Abrasive Blasting

Pertronix Flame Thrower Street/Strip HEI Distributors - For superior performance without misfires up to a minimum of 7500 RPM. Features 67% more energy than stock HEI systems with twice the energy across the spark gap, machined aluminum housing, includes high dielectric strength cap with brass terminals, lowresistance center brush, balanced rotor with nylon hold down screws, installed adjustable vacuum advance and mechanical advance kit with stamped weights and center plate. Legal in all 50 states and Canada (CARB E.O. #D-57-5). Made in the USA. One Year Manufacturer's Warranty.
SKU: 70039
Category: Performance & Tune-Up Ignition Distributors

Use 74410 fuel level sender(not included).
SKU: 74517
Category: Auto Accessories and Gifts

"Drive screws with one hand, thanks to the automatic screw feed on this driver. Powerful high-torque model can drive screwsup to 2 1/4in. long. The in–line D–handle gives you more control and less wobble. 4.3 Amp motorWeighs 4.7 lbs.Automatic screw feedSilent synchronized pin clutch reduces noise and vibrationAdjustable stopper base can be set for a variety of screw lengthsDrives screws up to 2 1/4in. long0–2800 RPMIn–line D–handleDesign allows screws to be set only 9/16in. from wallBelt clip for attaching to belt or holsterForward/reverse switchIncludes Phillips bit and caseModel 6834"
Manufacturer: Makita
SKU: 1591860
Category: Power Tools

Cosmic Sparkle Colors create a refined, star-like subtle shimmer effect. Cosmic SparkleColors have a more narrow size particle effect pigment then the Hot Rod Sparkle Colors. Cosmic Sparkle Colors are semi-translucent colors with a semi-gloss finish.Cosmic Sparkle Colors are best used over Auto Air Base Coat Sealer Dark or Auto Air 4200 Series Deep Black Graphic Colors Apply 1-2 light coats of Auto Air Base Coat Sealer Dark and 2-4 coats of Cosmic Sparkle Colors.
SKU: 34484 001
Category: Auto Body Water Based Paint

"Surface mounted, frame contact lift. Features electric-hydraulic operation and genuine asymmetrical design for easy vehicle entry. Factoryrotated columns allow doors of vehicle to be fully opened while properly positioned on lift. Arm restraints on all arms. Rise: 79in. Capacity: 10,000 lbs. Truck Ship. U.S.A."
Manufacturer: Rotary
SKU: 144651
Category: Automotive

"Poweredby reliable single phase, 220V-60Hz motors, this advanced two-post lift designs feature dual direct drive cylinders and single point safety releases. Swing away arms for greater drive-thru clearance. Automatic arm restraints engage each time the l"
Manufacturer: Bend Pak
SKU: 144726
Category: Automotive

Oil Pressure 0-100 PSIIncludes 1/8" electricsender and 1/4" NPT adapter.
SKU: 74114
Category: Performance & Tune-Up AutoMeter

This Stars &Stripes tin and knife set includes a matching belt buckle. The complete set makes a great gift for any patriotic collector. Tin measures 6in. x 4in. x 1 1/2in. Folding knife handcrafted to highest quality. Limited lifetime warranty. U.S.A.
Manufacturer: Northern Tool and Equipment
SKU: 199586
Category: Sporting Goods + Toys

"Spline–type drive delivers maximum power for fast work. 9.6 Amp hammer switches from rotary hammer to hammer–only modes. Electronic variable speed control lets you start holes easier. 9.6 Amp motorElectronic variable speed 230-450 RPM1250-2500 blows per minuteImpact energy 6.7JRotary Hammering and Hammering-Only modesDesigned not to hammer when idlingOne-touchsliding chuck for easy bit changesSpine drive for maximum powerLarge trigger switchSide grip swivels 360°, adjusts to 8 positions forward and backTorque limiter for smoother operationLED indicates when its time to replace brushesDouble insulatedIncludes depth gauge, bit grease and plastic tool caseModel HR4040C"
Manufacturer: Makita
SKU: 1591961
Category: Power Tools

The correct color and quality engine paint is the foundation of a well detailed engine compartment. Quick drying acrylicenamel, high 80-90% gloss finish is heat resistant to 500 degrees F. Colors shown are approximate. 12oz. net wt. Enough to cover 6 square feet. Buy 2 or more and SAVE!
SKU: 10017 Z
Category: Specialty Coatings Underhood Coatings Engine Paints

"Cooks Anything Under the Sun! Portable Sun Oven® goes anywheregood food and the Great Outdoors go hand in hand. Easy-to-clean fiberglass case with specular-finish reflectors and a tempered glass door. Lightweight 19 in. x 19 in. unit has a carry handle. U.S.A. No fuel needed! Reaches temperatures from 360ø to 400ø F Boils, bakes or steams your favorite foods"
Manufacturer: Northern Tool and Equipment
SKU: 33965
Category: Food Processing

Heat and Sound Insulation from DEI - This revolutionary material addsa new dimension to control heat with minimal clearance needed, only 1/16". Fastens to surafeces with screws, rivets, high temp adhesives or (70312) Cool Tape. Aluminized surface reflects up to 2000 degrees F. Sheet measures 36" x 40". Made in the USA.
SKU: 70311
Category: Performance & Tune-Up Drivetrain Heat Control

For everyday garage service to heavy–duty industrial use. Each jack is 100% factory tested for reliabledurability and safety. Minimum height: 5 1/4in.Maximum height: 19 1/4in.
Manufacturer: Torin
SKU: 144857
Category: Automotive

"This circular saw is designed for top–of–the–line handling and performance. A powerful 15 Amp motor gives a hefty power–to–weight ratio, and is effectively cooled with a centrifugal fanand baffle. Shaft lock takes care of quick b"
Manufacturer: Makita
SKU: 1591829
Category: Power Tools

Cobalt IR Gas Welding Goggles - These goggles provide appropriate protection for Oxy-Acetylene welding, and cutting cast iron, steel, and aluminum. Comparable to the eye protection provided with a #5 lens with better visibility because it minimizes the sodium flare from flux. Not for use with stick,MIG, TIG or any other welding process that creates an arc. Made in the USA.
SKU: 19243
Category: Metal Shop Welding Welding Tools & Accessories

"Husqvarna pole saw offers high power in a lightweight, compact design. Rapid acceleration and easy starting E-TECH II engine. The versatile cutter head makes it easy to reach even dense trees and bushes without using a ladder orskylift. Low weight, and r"
Manufacturer: Husqvarna
SKU: 195841
Category: Grounds Maintenance

"Allows you tolift front wheels, rear wheels or all wheels off the runways for brake, tire, suspension and alignment work. Jack rolls out of the way to provide unobstructed workspace when not in use. For use with all 4-post lifts. Truck Ship. U.S.A. Item shown is lift 144708 .To see rolling jack refer to item number 144711. Model# RJ-12"
Manufacturer: Bend Pak
SKU: 144717
Category: Automotive

Plugs into cigarette lighter tocharge batteries Charges 7.2 - 14.4 Volt batteries 1.3 - 3.0 Amp Hour (Ah)
Manufacturer: Makita
SKU: 1591775
Category: Power Tools

"Powered by a 14.4 Amp motor, yet still maintains a low noise level — only 87dB for quiet operation. The blade line is marked on the blade case as a guide. A heavier gauge means a more durable base design. With its 0° to 50° bevel cutting capability, this saw can cut a 2 x 4 at a 50° bevel. Maintenance free hypoid gearing for long tool lifeRuler on base for accurate cutting;1-1/2in. from blade to the left edge of sawAccepts diamond knockout bladesDouble insulatedBlade diameter 7-1/4in.Arbor 5/8in.Max. cutting capacities: at 90° 2-3/8in. at 45° 1-23/32in. at 50° 1-9/16in.No load speed 4,300 RPMWatts out 2,100AMPS (115V) 14.0Overall length 17-1/4in.Model 5277BU.S.A.Standard EquipmentCombination blade (792446-1)Wrench #13 (782016-4)"
Manufacturer: Makita
SKU: 1591838
Category: Power Tools

"Cuts up to 20–gauge mild steel, 24–gauge stainless steel and 1/16in. aluminum. It yields a minimum outside cutting radius of 1 3/16in. for flush and smooth right or left curve cuts. Thumb switch for easy one–handed operation. Double insulated for safety. 1.6 Amp motor4500strokes per minuteCuts 20 gauge mild steel, 24 gauge stainless steelMinimum outside cutting radius of 1 3/16in. for close left or right curve cuts with a smooth edgeRemoves a continuous metal curl with no material distortionSliding thumb on/off switch for one–handed operationDouble insulatedIncludes side blade set, center blade and hex wrenchModel JS1670"
Manufacturer: Makita
SKU: 1591971
Category: Power Tools

Sporty replacements for factory mirrorsintegrate turn signals into mirror housing —amber lights cascade as turn signal or can be hooked up to running lights. Black finish can be painted to match vehicle. Mirror face is 4¬in. x 4in. Fits 1988–Ü98 Chevy/GMC pickups and SUVs
Manufacturer: CIPA Mirrors
SKU: 3303851
Category: Automotive

FAN RELAY WITH THERMOSTAT ON 200F OFF 180F #30102 - Eliminate radiator probes and keepyour engine running at optimum temperature. Comes with a threaded thermostat that screws into the engine block or manifold for clean and simple installation. Thermostat thread size: 3/8"-18NPTF fitting.
SKU: 60092
Category: Performance & Tune-Up Electrical & Diagnostic Relay Kits & Connectors

"Cuts 2¬in. at 90°; fixed base for improveddust collectingElectric brake for quick adjustmentsPowerful 2-piece “D-35” motor with replaceable armatureExternally accessible brushesDust port on housing container for vacuum attachment2400 RPM no-load speed5/8in. arborIncludes battery, charger, carbide-tipped blade, rip fence, wrench and caseModel 5046DWD Standard EquipmentNi-MH Battery 1834 (193159-1)Charger DC1801Carbide tipped blade (A-90685)Rip fence (164095-8)Wrench (783203-8)Battery cover (414938-7)Plastic tool case (824524-0)"
Manufacturer: Makita
SKU: 1591720
Category: Power Tools

This electrostatic Dash Duster cleans in the hard-to-reach recesses of the dashboard, especially around the instrument panel, radio knobs and heating ducts. Washable brush, can bereused.
SKU: 52010
Category: Styling, Care & Custom Car Care & Protection Cleaning & Polishing

"Lightweight for controlled grindingoperations1/4in. collet capacityAll ball-bearing construction for long life3/4in. maximum wheel size for small grinding applicationsHigh speed (25,000 RPM) for maximum productionAll ball bearing construction for long tool lifeAccepts metal cutters and burrs for production workDouble insulatedIncludes collet, 2 wrenchesNo load speed 25,000 RPMAMPS (115V) 2.0Overall length 11-1/8in.Model GEO600"
Manufacturer: Makita
SKU: 1591735
Category: Power Tools

"Aluminum tripod provides asturdy base for laser levels. Lightweight, heavy-gauge legs feature quick-release clamps for faster and easier adjustments. Mounting head is flat with 5/8in. x 11in. threads."
Manufacturer: RoboToolz
SKU: 377960
Category: Measuring Tools

This powerful nailer has a durable and lightweight die–cast housing with multi–directional exhaust ports to direct exhaust away from operator. Designed with a rubber grip and a tool hook that can be installed on eitherside of the tool. Anti dry–fire mechanism extends tool life. Clear window allows you to see remaining nails. Uses standard 18-gauge brad nails from 5/8in. to 2in.60 to 115 PSI operating pressure100 pcs./strip nail capacityQuick-release loading magazineSide-loading nailsIncludes quick coupler and caseDimensions (L x H x W) 9-3/4in. x 9-3/4in. x 2-7/16in.Model AF503Standard EquipmentOil supply (181434-7)Safety glasses (1922-A)Plastic tool case2 ea. Allen wrench
Manufacturer: Makita
SKU: 1591903
Category: Air Tools

Use this laser-cut freehand airbrush template to expand your repertoire of custom graphic effects. Made from a solventproof flexible plastic for easy use on flat or curved surfaces like fenders, motorcycle tanks, and helmets. ThisPatriotica Template "Red" (PTR-1SP) by Craig Fraser provides another dimension for your next work of art. See our website www.eastwood.com for this and other template images.
SKU: 37305
Category: Auto Body Pinstriping / Airbrushing Airbrushing Stencils & Templates

US Tape CarpentersMeasuring Tape With Magnetic Tip — 1in. x 25ft. Length
Manufacturer: US Tape
SKU: 30006
Category: Measuring Tools

"An excellent warehouse tool, this truck features 12-ga. steel shelves with a structural welded sub-frame for years of rugged use. 19in. shelf clearance. 8in. x 2in. smooth-rollingcasters with mold-on rubber; 2 swivel, 2 rigid. 24in. x 36in. Truck Ship. U.S.A. Little Giant"
Manufacturer: Little Giant
SKU: 143983
Category: Material Handling

"The Lincoln® 1163 Powerlube is by far the most advanced pneumatic grease gun available! Fully automatic constant feed means you pull the trigger once to keepit pumping. Chrome-plated steel barrel; powder-coat paint. Includes 18in. high-pressure flex hose. Low-noise operation. Designed to be pump, bulk or 14-oz. cartridge filled."
Manufacturer: Lincoln
SKU: 403897
Category: Fuel Transfer + Lubrication

Add the brilliance of these top quality enamel paints to your vehicle's design. They can be applied by airbrush, roller, orbrush. The choice paint of professionals for pinstriping and lettering because of their excellent flow and durable, long-lasting finish.
SKU: 105 37087Z
Category: Auto Body Pinstriping / Airbrushing Pinstriping Paints

Grit Stix - Quick, versatile sanding solution. For wet or dry use, can be easily cut to any size or shape to fit the job. These 9-1/4" x 1-1/4" x 1/4" sticks are made form a rigid plastic core laminated with a soakable foam coated with quality abrasives in your grade of choice. Rigid enoughto block effectively, but flexible enough accommodate body contours. Much easier than wrapping abrasive paper around a paintstick again!
SKU: 13441
Category: Auto Body Body & Fender Cleaning & Stripping

When budget and performance are a consideration, look no further than Auto Gage This 3 gauge console features color coded bands for fast, accurate readings, along with red and green light bulbs covers for a custom look. The compact size is perfect for tight interiors while maximizing driver awareness and safety. Console includes gauges for oil pressure,water temperature, and voltmeter. All 3 gauges are electric gaugesand console comes with all necessary mounting hardware.
SKU: 74266
Category: Performance & Tune-Up AutoMeter Auto Gauge

Geared design allows controlled dumping and dispensing — no hoists required. Fork truck driver does not have to leave truck to dispense and no modifications to the fork truck needed. For 55-gallon drums only. Truck ship. U.S.A. 800-lb. capacity for a full drum500-lb. capacity for a half-full drumMeasures 38in.W x 32 1¬2in.D x 201¬2in.H.Model DGF-55
Manufacturer: Wesco
SKU: 144104
Category: Material Handling

1–lb. donut. Fits all standardtrimmer heads. U.S.A.
Manufacturer: Unifit
SKU: 80304
Category: Grounds Maintenance

"Turns your shortbed truck into a longbed in seconds! Durable cam-lock design secures long loads with tailgate open. Flipsinward with tailgate closed to secure small loads from rolling around. Includes cargo net for smaller items. Great for motorcycles, ATVs, bikes and longer loads when extended and groceries, tool boxes and coolers when reversed. Constructed of weatherproof, lightweight aircraft aluminum. U.S.A. Size: Mid"
Manufacturer: Northern Tool and Equipment
SKU: 127028
Category: Automotive

"Glycerin reduces needle vibration. 1/4in. NPT stem is easily plumbed on most pressure washers. Steel case. When ordering,remember to double the PSI to the maximum PSI of your pressure washer to avoid damage to gauge due to spikes. Grade B. All are designed for use with air, gas, oil and water. PSI: 0-60"
Manufacturer: Northern Tool and Equipment
SKU: 53600
Category: Gauges

"Ideal for compressors, pumps or spray washers. Single-phase motor operates at 1800 RPM. 115/230 Volt. 60 Hz. Enclosed cooling fan and thermaloverload protection with manual reset. 5/8in. diameter shaft. 2 5/16in. shaft extension. 3/16in. keyway. 4-hole mounting base. 3 7/8in.W x 6 1/2in.L. Motor HP: 1/2 HP Amps at 115V: 8.8 Amps at 230V: 4.4"
Manufacturer: Northern Industrial Tools
SKU: 161500
Category: Electrical

The Tubeless pneumatic tireis kind to the turf. Tire Size: 18 x 850 x 8 O.D.: 18.5 in. Tread: Sawtooth
Manufacturer: Northern Tool and Equipment
SKU: 13543
Category: Tires + Wheels

The quickest, easiest way to put large, burr-free holes in sheet metal (up to 16 gauge). Just drill a starting hole,insert punch, then thread die on opposite side and turn with Allen wrench (not included). Made in England with heat treated steel.
SKU: 28056
Category: Tools & Equipment Shop Tools Metal Working Tools

"Comes with horizontal and vertical scan and spin modes for all interior and exterior leveling and plumb applications. Provides dual beams for 90°: layouts and interior visibility up to 100ft. Accurate to 3/8in. @ 100ft. with approximate range of 330ft.. Rugged laser system is water, dirt and dust resistant for durable use. Three rotational speeds. Runs on 2 D batteries (not included). Laserdetector and hard case included"
Manufacturer: Porter Cable Robotoolz
SKU: 37725
Category: Measuring Tools

Super FlexSanding Blocks - We've added a new 6" Adjustable Flexible sander to compliment our popular 15" (31143) and 21" (31144) flexible sanders. This short sander features the same molded urethane construction but without flex rods and stainless steel face. Accepts standard 2-3/4" wide pressure sensitive abrasives. Made in the USA.
SKU: 31171
Category: HotCoat Powder Coating Metal Prep Cleaning & Stripping

SHIMRIN Neons (NE) are universal base coats that may simply be cleared for a final finish, or used as a base coat for Kandys or Pearls. Due to their unique chemistry make-up, they may be top coated with either acrylic lacquer or urethane enamel. Neons are designed for high visual impact on racecar, boats,cycles, etc. Note: USE WITH DISCRETION!! Neons have limited lightfastness in the sun. Neons are not recommended for overall refinishing or where long life is a requirement. Neonsare usually applied over 8513ZP Shimrin White BC-26.
SKU: 8509ZP 004 QT
Category: Auto Body Painting House of Kolor Paints

"Use with Squeeze Gun (Item# 338505) todetect UV leaks. Works with all UV lights. OEM approved and is compatible with mineral, ester, pag and alkyl benzene lubricants. U.S.A."
Manufacturer: CPS
SKU: 338506
Category: Automotive

"Cast iron anvils have many uses. Ideal formetal-working, loosening fittings and more! U.S.A."
Manufacturer: Northern Industrial Tools
SKU: 153110
Category: Hand Tools

This high quality tool manufactured by Martin Tools (originally manufactured by Fairmount) is hand-ground and polished to the perfect shape for bodywork and balanced for ease of use. Use on replacement door skins. Narrow heads for tight areas. Curved end: 1/2" x 1 3/4";Flat end: 1/2" x 1 1/2".
SKU: 31040
Category: Auto Body Body & Fender Body Hammers