Tie Down Engineering 3in. Bow Roller — Black @ Tools, Equipment & Painting online store

"Converts a drill press into an accurate mortising machine. Lets you chisel accurate,professional-looking square holes easily. Attachment fits over drill presses with diameters of spindle sliding bush ranges of 52.5mm, 55mm,58mm and 60mmDurable cast iron with built-in chisel housingAccepts up to 5/8in. (1.6cm) shank chisels (not included) Comes with 4 chisels shank sizes of 3/16 in, 9/32in, 3/8in, 1/2 in. Replacement chisels sold separatelyAlso includes installation hardware, instructions and plastic carrying case"
Manufacturer: Northern Industrial Tools
SKU: 155702
Category: Power Tools

"For use with item 143812. For higher ceilings. Increases maximum lift to 15ft. (instead of standard 11ft). Consists of: Two 6ft. telecoping sections that replace the standard 4ft. sections in the frame. A longer cable is preinstalled in the telescoping sections, and must be attached to thewinch drum."
Manufacturer: Northern Tool and Equipment
SKU: 143813
Category: Material Handling

"Swiftly cuts sheet metal up to 3/16in. thick, plus aluminum, stainless steel and carbon steelsRemoves spot welds in secondsUses shop air — no special gases requiredPrimary input is 120V household currentCuts cleanlywithout overheating and warping surrounding metalFan-cooled transformer and 20# duty cycle @ 25 Amps with built-in regulatorExtra-long tip nozzle and compact torch handle allows you to get in tight areasIncludes 1 long electrode, 1 long nozzle, 2 short electrodes, 2 short nozzles and moreModel 82021 Truck ship. Factory shipped"
Manufacturer: Century Welders
SKU: 1647210
Category: Welding

These disposable, safe touse, light-weight Nitrile Gloves keep your hands clean without restricting movement. Nitrile offers these advantages over vinyl: more resistant to chemicals, no latex allergy problem, tighter fit, tougher, better dexterity. Contains 100 gloves.
SKU: 43098 L
Category: Auto Body Protective Gear Gloves

"Ultra-slim hand-held 22-channel (8 GMRS/14 FRS) radio has 38 interference eliminator codes. Plus, it incorporates a built-in FM radio and high intensity LED flashlight. Also includes ear bud with microphone for hands-free communication. RechargeableLithium-Polymer battery with wall chargerIncludes carrying case"
Manufacturer: Audiovox
SKU: 161183
Category: Sporting Goods + Toys

Built in hand pumps prompte a high degree of control. This kit includes an 8" square and 8-1/2" x 14-1/2" heat welded reinforced bladder. Thin enough (about 1/8") to slide into a door glass opening or small hole. Strong enough to withstand yearsof use. A great tool for paintless dent repair. Made in the USA.
SKU: 52257
Category: Auto Body Body & Fender Dent Repair Kits

Hardened stainless steel nozzles. NozzleSize: 5.0 Spray Pattern: 0°
Manufacturer: GP General Pump
SKU: 25303
Category: Pressure Washers

"Replace worn-out corrugated bins permanently with these tough, durable, high density plastic bins. Quantum Shelf Bins are the industry standard for quality. These durable polyethylene bins feature a molded in label holder,built-in rear hanglock which allows bins to tilt out for complete access. A wide hopper front allows complete access to contents. Edges are reinforced for added strength. They are designed for 12in., 18in. and 24in. deep shelf units, racks or standard shelves. Bins are waterproof, impervious to most chemicals and unaffected by grease or oil. Sold in cartons only. U.S.A. 23 7/8in. x 4 1/8in. x 4in. Green"
Manufacturer: Quantum
SKU: 278509GN
Category: Storage

"External knob lets you control water flow, makes injector selection easy. Use injector on either the upstream or downstream side of the pump. On upstream side, the injector covers a range of .5 to 3.5 GPM at 10 to 120 PSI. On downstream side, flow rate adjusts from 2 to 8 GPM, with a max pressure of 3500 PSI and max temp of 180°F. Injection rates depend on GPM and pressure. Item #22687 has a metering barb onthe chemical inlet."
Manufacturer: Northern Tool and Equipment
SKU: 22686
Category: Pressure Washers

"Slime liquid sealant instantly sealspunctures as they happen, for up to 2 years. Plus, you get two bottles for the price of one%#33; U.S.A. Use in tubeless car, truck, ATV, trailer, riding mower and wheelbarrow tiresSeals punctures up to 1/4in. in tread area of tubeless tiresWorks repeatedly and wont freeze or dry up"
Manufacturer: Slime
SKU: 134754
Category: Tires + Wheels

Shrinking Hammer with Fiberglass Handle- The one inch square face works well for getting into corners. The 1-1/4" round shrinking face pulls the metal in. The Fiberglass Handle with cushioned grip absorbs shock for improved user comfort. Made in the USA. Limited Lifetime Manufacturer's Warranty.
SKU: 31221
Category: Auto Body Body & Fender Body Hammers

"Quickly obtains rated lift capacity of 44,000 lbs. with air-actuated operation. Handle top has metered-control release valve for easy height adjustment. Self-returning handle spring. 3 handle settings: 0° for access to lifting point, 45° for carrying load, 90° for storage. Lift of 10 inch. Min. height is 9 1/2 inch, max. is 19 1/2 inch. With extension screw. Manufactured by ISO-9002-certified factory to comply with the applicable American National Standard. Base is 22 7/8inch L x 12 1/2 inch W."
Manufacturer: Blackhawk
SKU: 144616
Category: Automotive

Easy ratchetaction quickly secures cargo on your truck or trailer. Release bar quickly loosens Cordura® nylon straps. Box-and-cross stitch loops for added strength. Breaking strength 3000 lbs. Working load 1000 lbs. Metal spring hook on both ends. U.S.A. Yellow StrapHook Width: 2 3/32in.
Manufacturer: S-Line
SKU: 331778
Category: Material Handling

"Turns a high pressure stream into a circular machine gun action; boosts cleaning impact up to 85%. Maximums: 1900 PSI, 140°F,3.43 GPM."
Manufacturer: NorthStar
SKU: 2244
Category: Pressure Washers

Spring-loaded bolt can be locked in the open position. Turning lever allows bolt toclose under spring pressure. Zinc-plated bolt housing and keeper.
Manufacturer: Buyers
SKU: 332316
Category: Shop Supplies

"Hydraulic pump delivers 10,000 PSI hydraulic pressure with only 80 PSI air pressure. Features air exhaust muffler for quieter operation and air and oil inlet filters for reduced risk of contamination. Great oil capacity to handle bigger jobs. 91.5cu. in. useable oil capacity59.19 cu. in./minute output load without load10.98 cu. in./minute with load90–175 PSI air pressure"
Manufacturer: Porto-Power
SKU: 156824
Category: Hydraulics

Carbon Fiber electric gauges add a new dimension of style to any type of high performance vehicle. When routing steel braidedlines and copper tubing isn't an option, these high quality electric gauges are the perfect choice. Carbon Fiber electric gauges offer the smooth response and accuracy of air core movement, ensuring flawless operation on the street or at the track.
SKU: 74741
Category: Performance & Tune-Up AutoMeter Carbon Fiber

This kit includes 1/3hp 3600 rpm motor, 2 each of the 6" buffs, set of 6 buffing compounds, buff rake, face shield, dust mask, instruction booklet, "the art of buffing" and the buffing cabinet.
SKU: 13020
Category: Metal Buffing & Finishing Buffing Motors / Accessories

"Warm your hands or your back with this fleece-covered warming belt. Insert a HotHands warmer in belts pouch to warm hands, or slide belt around to warm back, for up to 18 hours of heat. Comes with 1disposable HotHands heat pack. U.S.A."
Manufacturer: Northern Tool and Equipment
SKU: 96597
Category: Snow + Ice Removal

"The fast and easy way to construct a pair of ramps. Fasten the epoxy–coated steel ends to 2in. x 12in. boards (not included), attach the solid–rubber rampfeet, and you have great ramps for moving snowmobiles, tractors, ATVs and more onto your truck or van. 725 lbs. gross weight capacity per ramp1450 lbs. per pair (depending on board strength)Fastening hardware included"
Manufacturer: Insta-Ramp
SKU: 33222
Category: Material Handling

Ford Magnum style wheel as used on Ford Mustang,Ranchero,Torino. Also used on Avanti and AMC products. Quality accurate reproduction of the original wheel. Wheel sizeis 15"x6" with the stock 0" backspace. Configuration is 5-lug with a 4.5 inch bolt pattern. Compatible with disc brake applications. Made in the USA.
SKU: 62023
Category: Styling, Care & Custom Specialty Wheels Ford Wheels

"Durable, all-steel construction with non-slip surface provides sure footing for transferring pets, people and equipment from the back of your truck, SUV, van or camper. U.S.A. Extends beyond open tailgatesand folds up when not in useStep plate measures 22 1/2in. x 20 1/2in.Holds up to 500 lbs.Mounts in class III 2in. receiverModel RS-1000"
Manufacturer: Northern Tool and Equipment
SKU: 331969
Category: Automotive

Attaches to the spray guns of all Karcher electric pressure washers to help remove persistent stains andaccumulated dirt. Made of durable plastic with soft bristles.
Manufacturer: Karcher
SKU: 157881
Category: Pressure Washers

Fork extensions provide the extra support needed to lift long or large objects with a fork truck. Operator may install or remove extensions without leaving the fork truck. Automatic locking mechanism prevents fork extensions from sliding off during use. Fits onto forks 2in. thick. All-steel construction with cast iron fork tips. U.S.A. 72in.L x 4in.W (fits 4in. W Forks) Automatic locking mechanismFits onto forks 2in. thickSold aspairPowder-coat safety yellow finishIncludes warning/operating stickersU.S.A.
Manufacturer: Vestil
SKU: 143536
Category: Material Handling

"Amazing “Slime” sealant inside this tube seals leaks instantly-even punctures up to 1/8in.. Wont freeze or dry out. Works repeatedly. Imagine the worksite downtime and tire repair hassles you can avoid! Environmentally safe, non-toxic, non-hazardous and water soluble. Heavy duty construction. Size: 8in."
Manufacturer: Northern Tool and Equipment
SKU: 134701
Category: Tires + Wheels

Easyto install cooler shelf comes with 2 gallon cooler. Aluminum shelf measures 10in. W x 8 1/2in. D x 12in. H. U.S.A.
Manufacturer: Northern Tool and Equipment
SKU: 3489926
Category: Storage

"For fast, heavy duty grinding. 5/8 in.11 thread fits all right angle grinders. Wheel dimensions are working diameter x backing plate diameter x thickness.Dimensions: 5 in. x 3 3/4 in. x 2 in.Aluminum Oxide"
Manufacturer: Norton
SKU: 159931
Category: Abrasives

"This heavy-duty adjustable and removable mudflap system protects your trailers, 5th wheels, boats, snowmobiles and horse trailers from costly damage from rock chips and road debris. Fits most full-size trucks. U.S.A. Attaches to most 2in. ball mounts.Widthadjusts from 70in. to 81 1/2in.Anti-sail 24in. x 24in. mudflaps can be cut to any lengthRequires 1 1/8in. of space on ballmount shank"
Manufacturer: Northern Tool and Equipment
SKU: 331918
Category: Automotive

Hardened stainless steel orificenozzles last up to 5 times longer than ordinary nozzles. 1/4in NPT male thread. 5.5 Nozzle size 40-Degree spray pattern
Manufacturer: GP General Pump
SKU: 253053
Category: Pressure Washers

4-ft.high x 100-ft. long fencing constructed of high-density polyethylene is ultraviolet resistant for long-lasting durability. Effective to temperatures of 60° to 180°F. Tensile strength of 750 lbs. per foot; tensile yield is 3200 PSI. 3 1/2in. x 1 1/2in. nominal mesh opening.
Manufacturer: Northern Tool and Equipment
SKU: 143950
Category: Safety

The versatile and durable cart features a “no-tip” design and pneumatic saw tooth tread tires. The “interlocking”design allows the reel to be quickly and easily mounted to cart or transferred to a wall plate. Stores and maintains a 5/8in. water hose up to 150ft. long. 2-year limited warranty. U.S.A. Factory shipped. Rated to 150 PSI and 120°FIncludes 4ft. inlet hose with brass fittingGreen
Manufacturer: Northern Tool and Equipment
SKU: 159157
Category: Grounds Maintenance

Blue truck bins feature one piece molded construction and four casters-two rigidand two swivel. Great for storing and moving heavy material. Truck ship. U.S.A. Bushel Capacity 8 Gallon Capacity 64 Pound Capacity 450
Manufacturer: Wesco
SKU: 144171
Category: Material Handling

"Ideal for providing heat in a bathroom, laundry room or similar-sized indoor areas. High-performance heater features two settings of 1500 and 1000 Watts, adjustable automatic thermostat and safety overload switch. UL listed. Top-mounted controlsTop-mounted carryinghandlePower signal lightBuilt-in thermostat6ft. heavy-duty cord with grounded plug120V, 8.3/12.5 Amps8 1¬4in.W x 6 1/4in.D x 8 1/4in.H2-year limited warrantyModel LBH150G"
Manufacturer: Fahrenheat
SKU: 173033
Category: Clearance

"Great for tirerotation and brake work, this air jack has 8,000-lb. capacity. Truck ship. U.S.A."
Manufacturer: Worth
SKU: 144683
Category: Automotive

Large spray shield conveniently protects user. Effectively protects surrounding plants from wind-borne mistConfines spray within a80° to 110° area
Manufacturer: SP Systems
SKU: 251782
Category: Grounds Maintenance

"Made for a wide range of grinding, shaping and cutting jobs in home workshops, farms and machine shops. Aluminum oxide is recommended for all types of ferrous metals. Wheel dimensions are diameter x thickness x arbor. Dimensions: 9in. x 1/4in.x 5/8-11in. Type: Metal Maximum RPM: 6600 Threaded nut #11"
Manufacturer: Norton
SKU: 159946
Category: Abrasives

Non-sparking and easy on surfaces. 1/4in. x 4in. and 3/8in. x 6in. pinpunches. 1 1/32in. x 8in. drift punch.
Manufacturer: Northern Tool and Equipment
SKU: 155907
Category: Hand Tools

"Electrical test kit includes an assortment of testers designed to test all wiring applications: Non–contact Circuit Alert™, Ground Fault Receptacle Tester, Dual Telephone Line Tester and 5–Function/18–Range Multimeter. Durable plasticcarry case protects items."
Manufacturer: Gardner Bender
SKU: 96683
Category: Electrical

"Makes handling several flimsy bumper covers easy! Features 18in. and 30in. adjustable, removable braces. Four wheels for easy transport around shop. U.S.A."
Manufacturer: Northern Industrial Tools
SKU: 153908
Category: Automotive

"Heavy- drill press features durable 1 1/2 HP electric motor, cast table, 3-way handles for maximum control and heavy cast bases for stability. Truck ship. Chuck Capacity: 3/4in.Motor: 1 1/2HP, 120VSwing: 17in.Stroke/Spindle: 4 3/4in./MT4 spindleTableAdjust: Rack & Pinion, Tilting Speed: 180–2420 RPMTable Size: 14 5/16in. squareFootprint: 14 5/8in. x 24 1/2in. baseSize (L x W x H): 30in. x 14 7/16in. x 68 7/16in.Truck ship"
Manufacturer: Northern Industrial Tools
SKU: 155738
Category: Power Tools

Save time and labor and get professional results! Replaces the pilot drill bit in hole saw assembliesUniversal fit forall brands of threaded arborsLimited lifetime warranty; U.S.A.
Manufacturer: Century Drill & Tool Co. Inc.
SKU: 55902
Category: Power Tools

"Powered by a durable General Motors engine, this generator is the ideal package for your home, farm, ranch, business or any place you need clean, reliable power. This clean-burning generator uses the fuel many people use for heating their homes andbu"
Manufacturer: Stateline Power
SKU: 162328
Category: Generators

Hardened stainless steel orifice nozzles last up to 5 times longer than ordinary nozzles. 1/4in NPTmale thread. 5.0 Nozzle size 15-Degree spray pattern
Manufacturer: GP General Pump
SKU: 253039
Category: Pressure Washers

"Staggered knobby tires provide superior traction for off-road use. While knobs grip tightly to terrain, flexiblesidewalls soften the ride. Staggared knobby tread tires are tubeless and have a 90 day warranty. Size: 22 x 11-10 Ply Rating: 4 Outside Diameter: 21.85 Maximum Load: 385 Lbs."
Manufacturer: Tireco
SKU: 135042
Category: Tires + Wheels

"Easily transports 5 gallon pails, 30 gallon or 55 gallon steel, plastic or fiberdrums. Made of hard rubber casters and polished zinc finish for corrosion resistance. 900- lb. capacity. Model# DRUM-QUAD-H"
Manufacturer: Vestil
SKU: 143525
Category: Material Handling

All HotCoat Powders are exclusively formulated for theHotCoat System. They are optimized to promote static charge for uniform coverage and finish. All are UV and fuel resistant. Packed in 8 oz. net wt. cans.
SKU: 100 10248
Category: HotCoat Powder Coating Powders Standard Colors

Guides synthetic rope onto winch drum and helps prevent abrasion of winch rope. Standard Ramsey winchmounting pattern. Should not be used with steel winch cable. U.S.A.
Manufacturer: Ramsey Winch
SKU: 149147
Category: Winches

Original style powdercoated Chevy Rallye style Wheel. Quality accurate reproduction of the original. Wheel size is 15"x7" with 4-1/4" backspace. Configuration is 5-lug with a 4.75 inch bolt pattern. Compatible with disc brakeapplications. This wheel requires trim rings. Made in the USA.
SKU: 62166
Category: Styling, Care & Custom Specialty Wheels Chevy Wheels

Redesigned to be softer and hold more paint. Bristles areblended brown Kasan squirrel and ox hair. Excellent for adding second color or shadows. Nickel ferrule and wood handle.
SKU: 37135
Category: Auto Body Pinstriping / Airbrushing Pinstriping Brushes

Each kit includes 5 calibrated "pills" in 200 rpm incrementsbeginning with the first number listed. For example: 5353: 3,000 (3, 3.2, 3.4, 3.6, 3.8) x 1,000 rpm, or: 5367 6,600(6.6, 6.8, 7.0, 7.2,7.4x1000 rpm).
SKU: 74851
Category: Auto Accessories and Gifts

Hardened stainless steel orifice nozzles last up to 5 timeslonger than ordinary nozzles. 1/4in NPT male thread. 5.5 Nozzle size 25-Degree spray pattern
Manufacturer: GP General Pump
SKU: 253046
Category: Pressure Washers

"This cup is theperfect tool for surface and slant-wall preparation. 7in. dia. x single rowGrinds and deburs to a fast smooth finish on concrete, stone and similar surfacesThreaded 5/8-11Run wet or dry"
Manufacturer: National Diamond
SKU: 1555852
Category: Abrasives

Hardened stainless steel nozzles. Nozzle Size: 3.5 Spray Pattern: 0°
Manufacturer: GP General Pump
SKU: 25200
Category: Pressure Washers

Self Sticking Abrasive by the Roll - This over 32' long roll (10 meters) by 2 3/4" wide 1500 grit abrasive sticks easily onto your sanding board. Works especially well on the Adjustable Flexible Sanders (31143) 15" and (31144) 21" as well as most other flat and flexible sanders. Made in Germany. Can be usedfor wet or dry sanding.
SKU: 31168
Category: Auto Body Body & Fender Cleaning & Stripping

Mini bikedrum and 72 tooth sprocket. Riveted sprocket and drum assembly. U.S.A. Use with #35 chain Fits 410 x 350 wheel Drum Diameter: 4 1/2in. Drum Depth: 1 1/2in. Center Hole: 2 1/8in.
Manufacturer: Northern Tool and Equipment
SKU: 13632
Category: "Go-Karts, Mini-Bikes + Scooters"

Flakes may be added to any of our SHIMRIN Universal Bases, Kandys, Clears or Kustom Bases. Built from ultra thin polyester, our flakes are the lightest andeasiest to use. This finish is usually applied over BC-25 (8513ZP 001 QT) Shimrin Black Base.
SKU: 8542 003 6OZ
Category: Auto Body House of Kolor Specialty Products

Sporty style & extreme protection. Lightweight with distortion–free optics. Adjustable temples. DX™anti–fog hard coat. 99.9% UV protection. MeetsANSI Z87.1 and CSA Z94.3. U.S.A. Black full frameClear lens
Manufacturer: AO Safety
SKU: 174700
Category: Safety

Wet/Dry Abrasive Sheets - These autobody shop grade sheetsfeature silicone carbide abrasives for long lasting leveling action. Anti-Slip waterproof paper can be folded/cut to any size. Grit is electrostatically applied to assure uniformity.
SKU: 31356
Category: Auto Body Sandpaper Sandpaper

"Simple for one person to use. Includes 2.5in. polyolefin inboard wheels, and self-storing, load-tipping lever. Cradle stores drums 15in. off floor. Quick and easy assembly.Measures 32-1/2in. L x 19-1/2in. W x 21in. H. One year limited warranty. U.S.A. Orange enamel finish2.5in. polyolefin wheelsSelf storing load tipping leverHeight of drum off floor: 15in."
Manufacturer: Wesco
SKU: 14427
Category: Material Handling

"Perkins emissions-certified diesel engines are single-phase units that feature 12 Volt electrics, tropicalized radiator, battery rack & cables, flex fuel lines, encapsulated moisture-proof voltage regulator, rugged steel base, jacket water and engine block heaters,residential silencer with rain cap and stainless steel flex connector. Control panel has electric engine instruments, high-water temperature shutdown, low oil pressure shutdown and more. All units load bank tested and ready to run. 2-year/1500 hour limited warranty. Truck Ship. U.S.A. Factory shipped. Powered by reliable Perkins liquid-cooled diesel enginesAuto-start control panel, engine gauges and electrical metersRated Amps at 120-- 334Rated Amps at 240-- 167Dimensions 72in. L x 34in. x 51in.Manufacturer customizes product quickly and effectively"
Manufacturer: Stateline Power
SKU: 162221
Category: Generators

"Hangs up to eight uniforms and stores helmet, neckbrace, gloves, crew ear protectors and more. Constructed of .090 aluminum and measures 14in.L x 15in. W x 12in. H overall. U.S.A."
Manufacturer: Northern Tool and Equipment
SKU: 3489919
Category: Storage

"True 4 gallon polyethylene tank is UV resistant. Wide 6in. mouth for easy filling. Exclusive formula Viton® seals and O-rings resist chemicals 50% better than ordinary Viton... Chlorine compatible. Solid steelpump handle folds for storage. 20in. aluminum wand, 3 nozzles, 42in. hose and padded shoulder straps. Backpack-type sprayerNo-leak piston pump sprayerUse for herbicides, pesticides, fertilizers, chlorine, and other solvents"
Manufacturer: SP Systems
SKU: 251103
Category: Grounds Maintenance

"Build a 36in.H workbench that fits your needs and available space. Simply cut lumber to length (2x4 frames and plywood tops; straight cuts only — no miters or angles) and secure onto the heavy–gauge, rust– and solvent–resistant resin legs. Workbench holds up to 1000 lbs. per shelf. Kit includes 6–pk. of ShelfLinks, 2 Finley multi–position work holders, 4 multi–function hooks, assembly instructions and hardware. Lumber notincluded. Limited lifetime warranty."
Manufacturer: 2x4 Basics
SKU: 252204
Category: Shop Supplies

Aluma Blast Paint is specially formulated to duplicate the original look of cast aluminum car parts. Protected up to 250 degrees F by this paint, metal parts will keep that brand new look for a long time. Available in aerosols and quarts. One aerosol covers 6 sq.ft., one quart covers 50 sq.ft., acrylic lacquer, natural low 4-15% gloss. Great on intake manifolds and transmissionhousings. Buy 3 or more, mix and match, and SAVE!
SKU: 10109 Z
Category: Specialty Coatings Detail Coatings Metal Finishes

"18 HP Kohler Command Pro V-Twin engine. 48in. cutting width; 5 1/2in. cutting height. 0–3 MPH forward; 1 MPH reverse. 3in.W x 3/8in. thick flail blades.Go-anywhere tracks help you traverse and climb the steepest terrain. Capable of clearing over 2 acres of dense overgrowth and trees up to 2in. in caliper in a single day. The Brush Blazer also de-limbs trees. 94in.L x 55 1/2in.W x 43 1/2/in.""H overall. Truck ship. U.S.A. Factory shipped."
Manufacturer: Northern Tool and Equipment
SKU: 251173
Category: Grounds Maintenance

"A dry, shaded shelter for camping, picnics, barbecues, fair exhibits and other outdoor events. 1–piece, 1 3/8 in., powder–coated steel pop–up frame with adjustable leg heights. Fire–retardant to CPAI84 standards and resistant to water, rot and mildew. Include storage/carry bagand spike anchors. Open–top styleCommercial–grade white polyester (600 denier) with Scotchgard™ protectionStraight legs"
Manufacturer: Canopy Factory
SKU: 252377
Category: Tarps + Covers