Pedal Car Replacement Seat @ Tools, Equipment & Painting online store

"Includes 3/8in., 1/2in.,5/8in., 3/4in., 7/8in., 1in., 1 1/8in. and 1 1/2in. flat bits for wood boring. Durable rubber-sided case with secure sliding latch. U.S.A."
Manufacturer: Irwin SpeedBor
SKU: 962054
Category: Power Tools

"Quality padlocks from the worlds largest padlock manufacturer. All Master Lock padlocks are individually tested for strength and durability, and each offers a limited lifetime guarantee. 13/16in. wide bodyDurabledie-cast case1/8in. steel shackle for strong cut resistanceSet-your-own combination convenienceResettable to allow for a personalized combinationLimited lifetime warrantyU.S.A.Model 646D"
Manufacturer: Master Lock
SKU: 178562
Category: Safety

"Heavy gauge steel wheels are welded for extra strength. 1/2in. bore. Tough, semi-pneumatic tires. U.S.A. Hub Width: 1 1/2in. Hub Type: Offset Tread Type: Diamond Tire Type: Ball Bearing Tire Size: 6 x 1.50in."
Manufacturer: Northern Tool and Equipment
SKU: 196029
Category: Tires + Wheels

"Chrome vanadium 6-pt.sockets in a molded storage case. 9 standard SAE 1/2in. through 3/4in. and 9 standard metric sizes 10mm through 18mm. 5/8in. spark plug socket, 6in. extension bar and quick-release ratchet handle. Limited lifetime warranty. S"
Manufacturer: Northern Industrial Tools
SKU: 558384
Category: Hand Tools

Create a variety of manifold options. Use with Valve Type: DO5 GPM: 7 to 20 Fits Pump: 10594
Manufacturer: Northern Tool and Equipment
SKU: 211500
Category: Hydraulics

Bigger 300cc engine has low-oil shutdown 1in. x 31 5/32in. shaft; 1/4in. keyway 3/8in.-24 tapped end; 6.5in. bolt circle Electronic ignition; dual-element air cleanerCompression release; ball bearings on both ends Cast iron cylinder sleeve; 1 gallon tank with shutoff Model CS10T-931501 Note: there is no shaft on this engines fly wheel Power take-off is only on the outside of the engine Truck Ship.
Manufacturer: Kohler
SKU: 60010
Category: Engines

3/8in. drive chrome vanadium 9/16in. SAE deep socket.
Manufacturer: Northern Industrial Tools
SKU: 558117
Category: Hand Tools

"Versatile bins help you organize your work and storage areas for greater efficiency. Heavy-duty polypropylene with color molded right in. Virtually unbreakable, they are unaffected by weak acids and alkaline solutions. Waterproof and rustproof. Steam cleanable up to 250øF. 6 colors let you color code parts and tools. Optional dividers increase storageoptions. Optional windows maximize storage capacity, prevent spillage and protect parts from dust and dirt. Sold in cartons only. U.S.A. 4-1/2in. x 4-1/8in. x 3in. Green Qty.24"
Manufacturer: Quantum
SKU: 278515GN
Category: Storage

"Set includes sizes 10, 11, 12, 13, 14, 15,16,17, 18, 19. With clip rail storage. Limited lifetime warranty."
Manufacturer: Northern Industrial Tools
SKU: 558319
Category: Hand Tools

"6 Amp hammer drill delivers lots of power for extended use. Versatile 2–speed unit has ball and needle bearings for smoothdrilling, while variable speed offers controlled starts. Industrial metal gear housing for long–lasting durability. 6 Amp motorTwo speeds: High(0-2300 RPM), Low(0-900 RPM)Blows per minute: High (0-46,000), Low (0-18,000) Variable speedReversing switchDepth gauge for drop-in anchorsDouble insulatedAdjustable side handleIncludes drill chuck, chuck key and steel tool caseModel HP2010N"
Manufacturer: Makita
SKU: 1591950
Category: Power Tools

"Toughest! Rugged tarp fabric is highlyresistant to cold weather, fraying and tearing, thanks to a tough mesh weave of 420 denier polyester cords. Waterproof coating of polyvinyl chloride resists the suns ultraviolet rays. Heat-welded corners. Non-rust brass grommets every 2ft. along all 4 edges and at corners. Excellent cover-ups for equipment, truck and wagon loads, hay stacks and many other heavy duty purposes. Total thickness 16 mil. Charcoal gray. Finish Size: 10ft. x 12ft."
Manufacturer: Northern Industrial Tools
SKU: 118509
Category: Tarps + Covers

"All new collectibles with amazing detail feature die–cast construction, moveable hydraulic arm and precision 1:50 Scale. Idealfor both the sandbox and the mantle shelf, these miniatures are sure to entertain both collectors and kids alike!"
Manufacturer: Northern Tool and Equipment
SKU: 199297
Category: Die-Cast Collectibles

"This circular saw is lightweight, easy to handle and sports a left-side blade. Featuring a powerful 9.1 Amp motor andweighing in at just 6.8 lbs., this saw has a high power-to-weight ratio ... making it great for any jobsite. Plenty of power to cut stone or masonry with a diamond blade (sold separately) 9.1 Amp motor delivers 11,000 RPMBall-and-needle bearing constructionLock-off button helps prevent accidental startsMax.cutting capacities: at 90° 1-1/4in. at 45° 3/4in.Model 4200NHStandard EquipmentCarbide tipped blade (A-90093)Rip fence (164095-8)Socket wrench (782209-3)Spanner wrench (781011-1)"
Manufacturer: Makita
SKU: 1591819
Category: Power Tools

"115V, 50/60Hz. 108 CFM. 4 3/4in. square x 1 1/2in. deep. Not prewired; simply attach wires to poles in body. This item is in good to excellent condition, however is a usedunit."
Manufacturer: Northern Tool and Equipment
SKU: 07813
Category: Shop Supplies

"The easy–loading, angled aluminum magazineon this finish nailer holds125 finish nails and provides maximum durability. Simply insert the nail strip and pull back on the pusher block. Durable and lightweight tool with die–cast housing. Depth adjustment dial lets you work with a variety of finish applications. A multi–directional exhaust ports to direct exhaust away from operator. Fires 1 1/4in. to 2 1/2in. finish nails with a 125 nail capacity65 to 120 PSI operating pressureEasy–access nosepiece with quick–release cam–lockAn ergonomic rubber grip for comfortable operationRubber non–slip body bumper protects tool housing and workpieceIncludes hex wrenches, air fittings and caseModel AF632"
Manufacturer: Makita
SKU: 1591904
Category: Air Tools

Extra wide profile fender is 21in. long x8in. wide. Adapts to wide tires. Fits 8in. to 12in. wheels. High impact polymer with fender skirt. Order brackets 12601 separately. U.S.A. Color: Black
Manufacturer: Northern Tool and Equipment
SKU: 12602
Category: Trailers + Trailer Parts

Tool only; BATTERY NOT INCLUDEDPowerful Milwaukee motor develops 460 in.-lbs. of torqueTwo speed ranges: 0-500/0-l1700 RPMAll-metal Grip-Lok™ ratcheting chuck with carbide jawsSide handle rotates 360°for comfortUp to 50% more run-time than competitive productsExclusive quiet spindle lock mechanism relieves stress of metal slamming on metalExternally replaceable brushes for minimum down timeErgonomic soft finger grip for enhanced comfortExclusive reversible battery allows for easier access into tight areasModel 0616-20U.S.A.
Manufacturer: Milwaukee
SKU: M0437
Category: Power Tools

"Powered by an Kohler 27 HP 2 cylinder, 4 cycle, air cooled, electric start gas engine. Cuts a 7ft.W x 25in.H swath through snow. Electric start, choke, throttle and chute rotation are controlled from the cab. 18in. diameter fan and 14in diameter auger. Skid shoes and tall bank cutters are standard. Discharge chute lined with UHMW–PE to prevent clogging and freezing. Casting distance of up to 50ft. Replaceable, bolt–on 1060 carbon steel scraper blade. Electric and hydraulic lines have quick disconnect fittings for easy–on, easy–off. Safety chainfor secure transport. Your Meyer®, Fisher&@174;, or Western® plow unit powers hydraulic operated lift. Attaches to your 4WD pickup truck. U.S.A. Ships direct from factory. For 1/2, 3/4, and 1 ton four wheel drive pickup trucksCast iron gear boxAdjustable, sturdy steel constructed skid shoes"
Manufacturer: Hanson
SKU: 1037531
Category: Snow + Ice Removal

"This drill boasts a powerful 5.2 Amp motor for excellent performance, coupled with double gear reduction for extra power. Variable speed lets you easily drill a variety of materials. 5.2 Amp motorVariable speedVariable speed (0-1200 RPM)Reversing switchWell balanced, weighs only 3.7 poundsLock-on buttonBall and needle bearing constructionBelt clipModel 6402U.S.A.Standard EquipmentDrill chuck (763084-6)Chuck key (763422-2)"
Manufacturer: Makita
SKU: 1591851
Category: Power Tools

Long-lasting rubber wheels roll quieter. Wheel Size: 4in. x 1 3/16in. Plate Size: 4in. x 25/16in. Overall Height: 4 3/4in. Capacity: 154 Lbs. Wheel Type: Rigid
Manufacturer: Northern Tool and Equipment
SKU: 189315
Category: Casters

Priming with Powder - The legendary durability of powder-coated finishes is further enhanced with this epoxy based powder primer. If the utmost corrosion resistance and adhesion are important to you, you'll want to use this primer under every opaque powder we sell. (Not for use under our new line of High Temp Powders, or directly under translucent finishes.) For best results apply to clean bare metal and place in a preheated 400 degree F oven until flow out occures. DO NOT cure beyoundflow out as adhesion will be adversely affected. Remove from oven, cool, apply powder of choice and bake as normal.
SKU: 100 10301
Category: HotCoat Powder Coating Powders Specialty Colors

Heat treated to hold its edge. Polishedhigh-carbon drop-forged steel. Channellock Blue comfort grips. U.S.A.
Manufacturer: Channellock
SKU: 558656
Category: Hand Tools

"Storage shed is made of vinyl-coated steel — 5 times thicker than our standard steel finish. Over 7-ft. interior height with a 55 1/2in. W x 60in. H door opening wide enough for a tractor mower. All parts are numbered, precut and predrilled for simple, do-it-yourself assembly. 15-year limited warranty. U.S.A. Size: 10ft. x 8ft.Interior dimensions: 118 1/4in.W x 90in.D x86 2/3in.H487 cu. ft. of storage areaVinyl coating has grained finish to resist abrasion and provides 6 times greater UV protection than standard steel finishesMid-wall brace for greater all-around strengthBarn-shaped roof for extra storage areaSmooth sliding doors are double-braced for strength15-year limited warranty"
Manufacturer: Arrow Storage Buildings
SKU: 183451
Category: Tarps + Covers

"Portable solvent parts washer adjusts from 12 3/4in. to 36 3/4in.H, with locking pins securing each height for added safety. Stainless steel lead and fused safety latch, with a full shelf that eliminates splashing. U.S.A. 5-gallon fluid capacity115V 60 Hz pump, power cord wrapand flo-thru brush4 swivel casters (2 locking) make unit portableTank is 27in.L x 14 3/4in.W x 6 3/4in.HU.S.A.Model KT1007"
Manufacturer: Kleentec
SKU: 387910
Category: Parts Washers

"Versatile bins help you organize your work and storage areas for greater efficiency. Heavy-duty polypropylene with color molded right in. Virtually unbreakable, they are unaffected by weak acids and alkalinesolutions. Waterproof and rustproof. Steam cleanable up to 250øF. 6 colors let you color code parts and tools. Optional dividers increase storage options. Optional windows maximize storage capacity, prevent spillage and protect parts from dust and dirt. Sold in cartons only. U.S.A. 13-1/2in. x 5-1/2in. x 5in. Ivory Qty. 12"
Manufacturer: Quantum
SKU: 278520I
Category: Storage

"This trimmer illuminates your cutting edge with abuilt-in, shockproof, high output white LED light that never needs replacing for the life of the tool! Has a quiet yet powerful 4.8 Amp motor to conquer the most demanding trim jobs ultra-fast. A simple and efficient base lock system provides stability and speeds up trimming operations. Ergonomically designed slim 2 3/8in. body for comfort and control. 26,000 no–load RPMEasy thumb roller adjustment for fine cuttingExternally accessible carbon brushesTrimmer guide helps with non–piloted bitsExcellent 1 5/8in. trim–routing depthModel 3708FC"
Manufacturer: Makita
SKU: 1591812
Category: Power Tools

Apply and removewax or polishes With Style - Speed application and removal effortlessly with clever cordless design. Rechargeable quick-release nickle cadmium battery pack powers permanent magnet 12V motor, providing 3,000 orbits per minute. Includes 7" applicator, buff and polishing bonnets, 1 hr A/C Charger, 12V D/C Adapter, Lightweight-ergonomic design, 7" Random orbital 3-layer backing pad, ball-bearing construction, rubber over-molded handles, and instructions. Can polish most cars, van's SUV's in one charge. 2 year warranty. Imported.
SKU: 11123
Category: Tools & Equipment Shop Tools Body & Fender Tools

"Poly-Tec® tarps silver gray color reflects sunlight and ultraviolet rays. New second generation Poly Tech II-now safe andapproved for covering food products, chicken, litter, etc. It now has only one seam for extra strength. Constructed of heavy duty, triple layer, 6 mil laminated plastic and rip-stopped every 1/4in. to keep punctures from spreading. No grommets to pull out. You can position the tie-downs wherever you want them. U.S.A. Size: 30ft. x 60ft. Protects Up To: 84 4ft. bales or 60 6ft. bales Tie Downs: 70 Nylon Rope Included: 900ft."
Manufacturer: Northern Tool and Equipment
SKU: 18529
Category: Tarps + Covers

File Size 5/32in. Loop Size 12in. Drive Links 48 Guage.050
Manufacturer: Oregon
SKU: 91VG48
Category: Logging

"Lightweight, 100% welded aluminum construction will not rust. Overlapping end lip rests on trailer bed for a smooth transition. Ramp surface has non-slip serrations for extra grip. 1 1/2in. curbs on each side. Truck ship. Soldas a single. U.S.A. 36in. usable width6in.-29in. height range2500-lb. 4-wheel cart capacity1650-lb. 2-wheel cart capacityIncludes 2 safety chains to connect ramp to trailerModel# AWR-38-8ATruck shipU.S.A."
Manufacturer: Vestil
SKU: 143088
Category: Material Handling

"Replace worn-out corrugated bins permanently with these tough, durable,high density plastic bins. Quantum Shelf Bins are the industry standard for quality. These durable polyethylene bins feature a molded in label holder, built-in rear hanglock which allows bins to tilt out for complete access. A wide hopper front allows complete access to contents. Edges are reinforced for added strength. They are designed for 12in., 18in. and 24in. deep shelf units, racks or standard shelves. Bins are waterproof, impervious to most chemicals and unaffected by grease or oil. Sold in cartons only. U.S.A. 17 7/8in. x 6 5/8in. x 4in. Red"
Manufacturer: Quantum
SKU: 278506R
Category: Storage

Heavy-duty high-torque sealed motor located in hopper for long life. Epoxy coated chassis to resist corrosion. Easily mounts to ATV with supplied connectors. U.S.A. 100-lb. capacityMounts to front or rear rackHigh-torque sealed motor located in hopperEpoxy coatedchassisMounts to ATV with supplied connectorsQuick-connect wiring harness and hopper cover includedFits most ATVsU.S.A.Model M30
Manufacturer: EarthWay
SKU: 25541
Category: Snow + Ice Removal

Torque Wrenches - Properly tightened fastenersprevent mechanical disaster. Especially important for drive train and suspension components. This quality "click" type torque wrench is made in the USA. Storage case included.
SKU: 46223
Category: Tools & Equipment Shop Tools General Hand Tools

Create yourown wagon for any job! Wagon kit allows you to supply your own deck to customize your wagon. Kit comes with 4in. x 10in. pneumatic wheels and handle. 12in. between wheels Full front assembly moves on steering Capacity: 800 Lb.
Manufacturer: Northern Tool and Equipment
SKU: 143309
Category: Grounds Maintenance

Auto Air Iridescent Colors may be used alone for a subtle iridescent effect with some color shift as light is reflected or use as follows: Use as a base for 4200 Series Transparent Graphic Colors forcustom blends. Uses a base for the 4600 Series Candy Colors. For custom iridescent blends, apply 2-6 light coats of 4200 Series Transparent Colors over Iridescent Colors.
SKU: 34444 001
Category: Auto Body Pinstriping / Airbrushing Pinstriping Paints

"Organizes anddries up to 4 pairs of boots, from hiking boots to waders! Helps boots last longer and stay sanitary. U.S.A. Dimensions: 35in.L x 9 3/4in.W"
Manufacturer: Northern Tool and Equipment
SKU: 142631
Category: Storage

36in. W x 24in. D x 78in. H cabinet is 14-gauge construction. 132 removeable Ultra Bins in high impact polypropylene/polyethylene. Truck ship. U.S.A. 48 Bins 5 1/2in. x 4 1/8in. x 3in. 48 Bins 7 1/2in. x 4 1/8in. x 3in. 18 Bins 11in. x 5 1/2in. x 5in. 12 Bins 14 3/4in.x 8 1/4in. x 7in. 6 Bins 14 3/4in. x 16 1/2in. x 7in. Green
Manufacturer: Quantum
SKU: 178514GN
Category: Storage

You get two ceramic nozzles and one washer. ALCNozzle Size: 1/8in. CFM@ 80 PSI: 15
Manufacturer: Northern Tool and Equipment
SKU: 155516
Category: Sandblasters

Create exciting metallic effects with this iridescent finish! The effect is accentuated when used over dark colors. With five finishes that can be used individually or dry mixed right in the cup, the possible combinations are almost endless. For best results apply base coat of your choice (dark colors produce the mostdramatic effect) and cure only long enough to flow out the powder. DO NOT COMPLETELY CURE, as adhesion of the Iridescent topcoat will suffer. Apply Iridescent or blend of Iridescents and cure for 20 minutes at 400 degrees F after flow-out. Cured finish is a smooth high gloss. Made in the USA.
SKU: 10323
Category: HotCoat Powder Coating Powders Iridescent Colors

Dynamat is a self-stick modified-polymer sheet that adheres to sheet metal, fiberglass, plastic and wood, and effectively dampens out road noise or car audio systems. Original Dynamat is for doors, floors, and generalpurpose sound deadening. One sheet measuring.070" thick by 19.5" by 32.5". Withstands temperatures up to 350 degrees F.
SKU: 52052
Category: Styling, Care & Custom Interior Sound Proofing

Get into the camo craze with this2in. trailer tube cover in Mossy Oak Shadow Grass pattern.
Manufacturer: Curt Manufacturing
SKU: 33112
Category: Towing

Add this white adirondack table to the chair and ottoman set (Item# 253501) and bench (Item# 253505) for a great backyard or patio combination. Made of painted fir. 20 in.W x 20 in.D x 18 in.H. Assembly required.
Manufacturer: Northern Tool and Equipment
SKU: 253503
Category: Outdoors

13.5 HP OHV engineModel EH410YD0022Shaft 1in. x 3.66in.Approx. mounting base dim. 7.68in. x 2.6in.–3.27in. to 3.39in.–4.06in.Recoil startAluminum alloy blockCast iron cylinder linerElectronic ignition withautomatic timing adjustmentDual ball bearing crankshaft1.85 gal. fuel tankIncludes muffler and exhaust manifoldApproved for sale in California2-year limited warranty
Manufacturer: Robin Subaru
SKU: 601084
Category: Engines

"Mechanically locks both drive controls of all makes ofskid-steer loaders. Loader cannot be moved, even if the ignition key is available. Prevents theft and unauthorized use of your equipment. Multiple units can be ordered keyed alike (see Item# 103783). 1-year limited warranty. U.S.A."
Manufacturer: Equipment Lock Co.
SKU: 103781
Category: Safety

Type 27 depressed-center wheel for use on all types of metal andmasonry. Designed for offhand cut-off; operates at 90ø angle. Also ideal for notching or cleaning pipes and weld beads. 5/8in. arbor. U.S.A.
Manufacturer: Norton
SKU: 1599752
Category: Abrasives

"Reach those high limbs without having to get on a tipsy ladder. The Remington Pole Saw cuts limbs and branches with ease. Low kickback chain with chrome chain cutters. High visibility orange, rust-free fiberglass pole has infinite coupling settings and built-in stop. UL Listed. Engine: 1.25 HP ElectricWatts: 840Volts: 115 volts, draws 7 ampsShaft Length: 6ft. 6in. to 9ft. 8in.Bar Length: 8in.DetachableSaw: Yes, Saw detaches from pole for limbing and trimmingCutting Capacity: 8in. cutting capacityAuto Chain Lube: YesWeight: 13 lbs.Model: 104317U.S.A."
Manufacturer: Northern Tool and Equipment
SKU: 150225
Category: Logging

"Cast-aluminum chock has BIG gripping teeth. Flanged base for mounting options. U.S.A. Base Size: 12in. L x 6in. W Static Holding Capacity: 55,000 Lbs."
Manufacturer: Northern Tool and Equipment
SKU: 451671
Category: Tires + Wheels

Magic Mix Rough Surface Polish Kit for Aluminum - Maintain the shine on bare aluminum from castings to diamond plate. Metal Prep/Cleaner is a fast working acidic oxidation remover. The Metal Polish is then used with the included wool buffing pads by hand to bring aluminum to a high shine. Trucker's favorite for keeping aluminum wheels, gas tanks and diamond plate shining. Kit includes 8 ounces of Metal Prep/Cleaner, 8 ounces of Metal Polish,and 4 reusable imported wool application pads.
SKU: 52347
Category: Metal Buffing & Finishing Buffing Compounds

"Complete driveline is economical and easy to install, so you dont have to spend time trying to repair damaged or worn shafts. Can be cut to desired length to meet your driveline needs. Meets all ASAE standards. Series: 6Common use: General all-purposeHP: 64Compressed length: 57in.Tractor yoke: 1 3/8in. x 6 spline quick-disconnectImplement yoke: 1 3/8in. x 6 spline quick-disconnectModel CS65011"
Manufacturer: Northern Tool and Equipment
SKU: 11986
Category: Ag Equipment + Excavating

Made from high grade steel, this 14" Mill Cut body file features 10 tpi for fast cutting with less material build-up. Use with the 31053 solid maple file holders for maximum control and preciseresults. Imported.
SKU: 31051
Category: Auto Body Body & Fender Files / Spoons

Experience the ultimate in seat cover fashion! Seat cover with Mossy Oak pattern has patented lace-up system for a great fit. Constructed of 600 Denier canvas fabric thats both durable and comfortable. Machine wash incold water.Drip dry only. U.S.A.
Manufacturer: Mossy Oak
SKU: 335166
Category: Automotive

"Super-soft, multi-color cloth cover is padded with heavy 32-oz. 100%cotton filler. Tough polypropylene binding is double-stitched for long service. Size: 72in. x 80in. Package of 6"
Manufacturer: Northern Tool and Equipment
SKU: 143316
Category: Tarps + Covers

"Enjoy 2-way digital wireless voice communication on a fully secure 900 MHz radio link. Multichannel system can be expanded with extra units. Paging function allows you to broadcast to all stations, then speak to responding station privately. Transmits up to 1000 feet between 2 included unitsNo wall outlet neededMultiple modes: single channel, allchannels or room monitoring with battery-saving designPaging functions lets you broadcast to all stations, then speak privately to responding stationVolume controlSystem can be expanded with extra units (Item# 331719, sold separately)Each unit runs up to a year on 4 AA batteries (not included)U.S.A."
Manufacturer: Northern Tool and Equipment
SKU: 331716
Category: Safety

1.7 CFM pump pulls up to 50 Microns. Includes capacitor start andbuilt-in overload protector. Direct drive design is efficient and extremely reliable. One year limited warranty. U.S.A.
Manufacturer: Classic Tools
SKU: 3316163
Category: Automotive

HIGH BEAM HEADLIGHT RELAY KIT (1999 AND UP) #30821 - GM's four headlight system turns low beams off when highs areselected. Kit keeps all four headlights on when high beams are selected, increasing intensity and improving light spread pattern. For 1999-2002 GM full-size trucks and SUVs. NOTE: If your head-light wires are Tan and Green see Item# 60111, if Purple and Yellow use Kit #30821).
SKU: 60120
Category: Performance & Tune-Up Electrical & Diagnostic Relay Kits & Connectors

You can remove all vinyl pinstriping, graphics, and adhesive residue without damaging the paint. Simlpy mount the eraser in your air drill(recommended speed is 3,500 to 4,000 rpm.) and safely remove all the old body striping in minutes. Unlike chemicals and solvents commonly used for this job, the soft wheel is gentle to the finish. Not recommended for acrylic lacquer or plexiglass.
SKU: 37023
Category: Styling, Care & Custom Car Care & Protection Cleaning & Polishing

"Carry up to 1200 lbs. on this large–sized wagon. Auto–type steering makes wagon less proneto tipping during turns. Large, easy–to–grip “D” handle. Powder coat finish. Expanded metal deck with 2in. H rim5in. x 13in. pneumatic tires"
Manufacturer: Northern Tool and Equipment
SKU: 143031
Category: Grounds Maintenance

For use with Milwaukee hole saws 9/16in. to 1-3/16in. diameter1/4inshank with 3 milled flats for greater gripping capability in the chuck1/2in. – 20 threadModel 49–56–6960U.S.A.
Manufacturer: Milwaukee
SKU: M0382
Category: Power Tools

"The 1000 Series panel sawsfeature a 10ft. wide steel frame. This package features such accessories as a folding stand and wheels on the frame for portability, dual rip gauges, double bearings, plus a stop bar and measuring tape. This frame will fully s"
Manufacturer: Saw Trax
SKU: 334003
Category: Power Tools

"Heavy-duty wagon trailer is ideal for use around the farm, ranch or home. Builtwith heavy angle iron and structural steel. MIG welded construction. Rolls on 20X10-8 high flotation slow speed tires. Tandem wheel design handles rough terrain. Has 1in. lumber for sides and floor. Designed for 24in. stroke hydraulic cylinder (sold separately). Truck ship. 20X10-8 high flotation slow speed tiresStrong 1in. axles with greasable roller bearings.Tandem wheel designLarge 4ft. x 8ft. deck4000-lb. capacitySteel frame with MIG welded constructionBlack painted finishPin type hitch1in. lumber sides and floor"
Manufacturer: Northern Tool and Equipment
SKU: 143319
Category: Grounds Maintenance

"Replace worn-out corrugated bins permanently with these tough, durable, highdensity plastic bins. Quantum Shelf Bins are the industry standard for quality. These durable polyethylene bins feature a molded in label holder, built-in rear hanglock which allows bins to tilt out for complete access. A wide hopper front allows complete access to contents. Edges are reinforced for added strength. They are designed for 12in., 18in. and 24in. deep shelf units, racks or standard shelves. Bins are waterproof, impervious to most chemicals and unaffected by grease or oil. Sold in cartons only. U.S.A. 17 7/8in. x 4 1/8in. x 4in. Green"
Manufacturer: Quantum
SKU: 278505GN
Category: Storage

The most important tool to any pinstriper is a good striping brush. Hand made of choice 100% camel hair. Ferrules are treated with special adhesive to keep bristles from pulling out. Round handle lets you easily roll the brush on tight corners. The 2" bristles load well for long lines. Brushes come in plastic storage tubes.Stripes in six sizes from 1/8" to 1/2" wide.
SKU: 37061
Category: Auto Body Pinstriping / Airbrushing Pinstriping Brushes

Professional-quality hammer tacker drives narrow crown Surebonder #4 heavy-duty staples (sameas Arrow T50) 1/4in to 9/16in. lengths. Ergonomically designed rubber handle has shock-absorbing grip for easy handling and stapling.
Manufacturer: Surebonder
SKU: 55864
Category: Hand Tools