4oz. Auto Air Hi-Lite Orange @ Tools, Equipment & Painting online store

Auto Air Details Colors are used for fine detail and mural work at 30psi or. lower Recommended for use with airbrushes 0.2mm or larger. Detail Colors are for use withall other series in the Auto Air Colors line. Detail Colors must be cured with heat and allowed to thoroughly dry before they can be masked or sanded.
SKU: 34391 001
Category: Auto Body Pinstriping / Airbrushing Airbrushing

This kit contains 1 Center spear stencil, 2 Lower hood panel stencils (L and R), 2 Upper hood panel stencils (L and R), 2 Upper hood panel (rear) stencils (L andR), squeegee and instructions.
SKU: 10693
Category: Styling, Care & Custom Phoenix Graphix Chevrolet

"Ideal anywhere you need pressured water for showering, rinsing hands and feet, bathing pets, washing dishes and more. Fill and leave in the sun to enjoy warm water, too! 3-gallon tank has an oversize handle and big wheels for easy transport. Extra long-reaching hose allows for greater convenience. High-efficiency pump lets you pressurize fast with fewer strokes. Large, poly full shower head had instant on/off. 3-yearlimited warranty. U.S.A."
Manufacturer: Hudson
SKU: 168331
Category: Grounds Maintenance

"Large loads are no problem with this tough, 16 gauge steel cart. 2 trays with 3in. depth gives you plenty of extra carrying capacity. Chrome plated sides. Rolls easily with 4in. casters, 2 rigid and 2 swivel. 2 handy foot brakes. Easy to assemble. 16in. W x 30in. Lx 32in. H."
Manufacturer: Northern Tool and Equipment
SKU: 143013
Category: Material Handling

"This motorized, back–carried sprayer applies concentrated pesticides with superior penetration and turbulence for uniform coverage of large areas, even in dense foliage. Sprays 18– to 75–micron-sized droplets in a swath up to 75ft. wide and 40ft. high. Uses undiluted pesticides, so no mixing or carrying heavy water is needed, reducing both labor and pesticide costs. U.S.A. Sprays most any liquid up to 40ft. highRugged, tubular steel frame with heavy–duty poly fuel and pesticide tanks2.5 HP engine @5000 RPM with air volume of 13.7m3/min. (485 CFM) at a nozzle speed of 406 km/hr. (252 MPH)Ergonomic controls and wide, padded shoulder straps make it comfortableto use and carryCan also be mounted on motorcycles, trucks or all–terrain vehicles.Model 98600A"
Manufacturer: Hudson
SKU: 228816
Category: Grounds Maintenance

"Dual speed: 400 and 200 RPM6–position adjustable clutch; 3.5 to 26 in./lbs. of torqueAdjustable swivel handle for tight applicationsForward/Reverse button with switch lock featureIncludes screwdriver, 2 batteries, charger, chuck attachment, 4–pc. bit set and impact–resistantcarrying caseModel 6547–22"
Manufacturer: Milwaukee
SKU: M0272
Category: Power Tools

Faster Cutting, Longer Lasting Treated Buffs - Our new line of treated buffs work faster, longer than non-treated buffs. Suitable forfaster material removal, these wheels take the place of standard mini buffs. Used with Stainless Steel Compound (13001) or Tripoli Compound (13135). Great on hard or soft metals!
SKU: 13238
Category: Metal Buffing & Finishing Buffing Buffs

"Fast and productive, the auger has wide flutes for fast chip removal and a screw–tip to assist the user in boring fast, clean holes. Single–spur design scribes the circumference of the hole first to leave a smoother finishCoarse screw point provides fast boring in both soft and hard woodsPrecision–ground cutting edge for a longer lifeFull–length heat treatment guards against bending bit in heavy–duty applicationsWide lands keep bit straightas it bores through the holeModel 49911"
Manufacturer: Irwin
SKU: 962062
Category: Ag Equipment + Excavating

"40in. boom for broadcast spraying . Sprays a 40in. pattern. 1.8 GPM SHURflodiaphragm pump 60 PSI on-demand pump Durable Lexan® boom arms Includes 15ft. gun hose, two nozzles and remote Comes with 2 tires Roundup® ready"
Manufacturer: NorthStar
SKU: 28518
Category: Grounds Maintenance

"Strong synthetic fiber is elastic for excellent shock absorbency. Ideal for marine and farming uses, astiedowns and with winches. Resistant to rot, abrasion, mildew, petroleum and most chemicals. U.S.A."
Manufacturer: Northern Tool and Equipment
SKU: 45502085
Category: Material Handling

"Fits our spreader item#s 10389 and 103897. Factory shipped. Fits most pickups, all tailgate widths For a 2in.receiver"
Manufacturer: Buyers
SKU: 103892
Category: Snow + Ice Removal

Use with common pot patterns or chainless anchor systemLonger/wide base for stabilitySafety tie-down bracketsUtilizes 10in. ram for longer pullsIncludes two 6in. chainswith claw hooks and one 9in. chain with hook5-year limited warranty on frame
Manufacturer: Porto-Power
SKU: 156801
Category: Automotive

6 1/8in. x 1 1/4in.8 1/2in.center mountingHardwiredRedU.S.A.
Manufacturer: Peterson Manufacturing
SKU: 127617
Category: Trailers + Trailer Parts

"The 906 Compact Wheel Loader is built to the same high standards as larger Caterpillar wheel loaders, delivering CAT reliability, durability and efficiency. 1:50 scale. Free Tee Shirt Offer! Receive one free CAT Logo Tee Shirt with each CAT Collectible item purchased. Free CAT Tee Shirts, size XL, will not be shown in your shopping cart, but will be added to your order as itis processed. Offer valid while supply lasts."
Manufacturer: CAT
SKU: 199275
Category: Die-Cast Collectibles

Use with the Paint and Pesticide Respirator. NIOSHapproved. U.S.A.
Manufacturer: AO Safety
SKU: 174679
Category: Safety

The quickest, easiest way to put large, burr-free holes in sheet metal (up to 16 gauge). Just drill a starting hole, insert punch, then thread die on opposite side and turn with Allen wrench (not included). Made in England with heat treatedsteel.
SKU: 28027 H
Category: Tools & Equipment Shop Tools Metal Working Tools

NorthStar™ professional pressure washers combine industrial Honda Engines with high quality Cat direct drive triplex pumps. Professional pressure washers are designed by Northern® engineers to meet the demandsof the professional and rental mark
Manufacturer: NorthStar
SKU: 1578171
Category: Pressure Washers

"Increases heated or cooled air flow to "problem" rooms up to 50%! Squirrel-cage style Duct Booster® installs in ducts 5in. in diameter or more and in rectangular ducts at least 3 1/4in. deep. Dependable 40 Watt Fasco motor moves 275 CFM free air, draws .51Amps. UL listed. Mounting Template: 4in. x 7in. Dimensions: 7in.L x 4in. Can be either wired to a standard on/off switch or by wiring the duct booster in parallel with a central furnace blower motor."
Manufacturer: Northern Tool and Equipment
SKU: 18000
Category: Heaters + Stoves

"For Genisys owners who want to add complete 2003 Asian coverage. Expanded to include Honda and Nissan OBD I cables and Nissan SystemSmart insert. Includes software CD, Asian Import 2003 Smart Card, Import 96, ODB I software cartridge, Asian import–specific cables and manuals. OTC# 3421–32. U.S.A."
Manufacturer: OTC
SKU: 1638746
Category: Automotive

"Low 580°F working temperature rod means you can weldwith a propane torch. Works on copper, brass, steel and cast iron. Allows dissimilar metals to be joined when ysing the super flux included with the kit. Meets MIL-S-12204B Type II, Composition B specs. You get a stainless steel brush, easy instructions and enough flux to weld the 1/2 pound of welding rods included (pack of 18-20)."
Manufacturer: BAC Industries
SKU: 110701
Category: Welding

House of Kolor Info Pack - Need help deciding which House of Kolor Paints you need? The House of Kolor Tech Manual featuresapplication information for the full line plus mixing chart, polishing and finishing instructions and more. softbound 72 pgs. The 14 page House Of Kolor chart contains hundreds of chips featuring Shimrin Universal Bases, KOSMIC KOLOR Urethane and PolyUrethane Enamels, their original KUSTOM KOLOR Acrylic Lacquers, dry pearls, flakes, striping paint and specialty products.
SKU: 34202
Category: Auto Body Painting Books & Videos

Chrome vanadium 6-pt. sockets in a molded storage case. 14 standard socket sizes 3/8in. through 1 1/4in. 3in. dual position extension bar and quick-release ratchet handle. Limited lifetime warranty. Standard SAE sockets: 3/8in. (Item# N/A); 7/16in.(Item# 558135); 1/2in. (Item# 558136); 9/16in. (Item# 558137); 5/8in. (Item# 558138); 11/16in. (Item# 558139) 3/4in. (Item# 558140); 13/16in. (Item# 558141); 7/8in. (Item# 558142); 15/16in. (Item# 558143); 1in. (Item# 558144); 1 1/16in. (Item# 558145); 1 1/8in. (Item# 558146); 1 1/4in. (Item# 558147)3in. dual-position extension (Item# 558132);Quick-release ratchet handle (Item# 558125)
Manufacturer: Northern Industrial Tools
SKU: 558376
Category: Hand Tools

Kevlar(R) Hose Kit- Kevlar Hose is lightweight* yet extremely strong and flexible. Perfect for pressure gauges, these hoses have a working pressure of2900 lbs. and a burst pressure of 8,800 lbs. The blue color also creates a clean custom look under the hood for the ultimate in strength and style. Half the weight of the Braided Stainless Steel Hose Kits Includes -4AN Fittings.
SKU: 74411
Category: Auto Accessories and Gifts

"Dividers for heavy duty stacking bins #17805, #178050. 24-pack."
Manufacturer: Akro-Mils
SKU: 178051
Category: Storage

100-ton heavy duty shop press has sliding head design with winch and cable operation. Truck Ship. U.S.A. Arcan 34in.W between uprights 10 1/4in. between table channels Ram to table range: 1in. to 32in. Ramtravel: 7in. Base measures: 34in. x 421/2in. Overall height: 78in.
Manufacturer: Arcan
SKU: 145595
Category: Metal Fabrication

"Aluminum oxide depressed center cut-off wheels for metalcutting and grinding. 4 1/2in. x 1/4in. x 7/8in. 13,300 max. RPM."
Manufacturer: Olympia
SKU: 1599989
Category: Abrasives

"Popular with farmers and light-commercial users for finding drain tile orother objects underground. Some assembly required. U.S.A. Constructed of high-memory spring steel that will not bend or kink3/8in. rod with a 3/8in. fine-threaded tip made larger than the probe to allow air to pass the shaft, reducing friction10 1/2in. handle has 2 rubber-cushioned gripsHandle threads onto probe shaft (removes for easy transport and storage)Some assembly requiredU.S.A."
Manufacturer: Northern Tool and Equipment
SKU: 451800
Category: Ag Equipment + Excavating

"17–pc. fast change drill & drive set includes 1/4 in. fast change connector, 4 1 in. insert bits, 4 2 in. power bits, 3 nutsetters, 4 black oxide drill bits with 1/4 in. hex shank and a compact screw guide. Innovative screw guide drives screws straightat any angle. Black oxide–coated drill bits last longer and are more corrosion resistant than high speed steel drill bits. With convenient storage case. Limited lifetime warranty."
Manufacturer: Stanley
SKU: 399921
Category: Power Tools

"No welding necessary! Jig-welded frame is made from 7/8in. O.D. x .083in. wall tubing. Accommodates up to 17 1/2in. O.D. mounted wheels. Complete with fork, engine mounting plate, front axle holes, rear mounting tabs, nuts and bolts. Not for street use."
Manufacturer: Northern Tool and Equipment
SKU: 13152
Category: Clearance

"Work platform available in two sizes comply with OSHA regulations. Each unit comes with four 4in. x 1 1/4in. poly swivel casters for portability. 60in. high expanded metal back, dual locking gate and four-way safety treadplate. Both also have 4in. high kick plate, safety instruction sign, 42in. high hand rail with 21in. mid-rail and 36in. safety chain to attach to fork truck. Tine lockslock platform to forks. Usable fork pockets are 7 3/4in.W x 3 3/8in.H in rear and 7 3/4in.W x 1 7/8in.H in front. Truck ship. U.S.A. Model# WP-36-36-CA"
Manufacturer: Vestil
SKU: 143540
Category: Material Handling

"Built mighty to perform tough! Custom loader placement maximizes tractor/loader performance. Loader has easy-on, easy-off mounting. Solid steel front supports provide added frame support and improved visibility. Joystick valve kit gives ultimate operator control for on-the-go bucket leveling. U.S.A. Attaches to Item#188023Customized front support systems for premium performance and precision fitIncludes commercial-grade bucket with spill guardEasy-on, easy-off mountingSolid steel front supportsJoystick valve kit for ultimate operator controlTruck shipU.S.A."
Manufacturer: Northern Tool and Equipment
SKU: 188620
Category: Ag Equipment + Excavating

"For use on mini-bikes, go-karts, lawn equipment and hand trucks. Tire Size: 410/350 x 4 O.D.: 10.5in. 260 Lb. Capacity 30 PSI"
Manufacturer: Northern Tool and Equipment
SKU: 1390
Category: Tires + Wheels

"UTV universalreceiver mounting kit includes a winch mount, receiver step and accessory attachment mount. Designed for use with UTV winches (sold separately). Installs in minutes and provides easy, user-friendly re-installation. Single-pin release for quick change of accessories. Required to mount power brooms Item#s 2500894 and 2500895.U.S.A."
Manufacturer: Swisher
SKU: 2500893
Category: Towing

"Cushion–Ease nitrile rubber safety borders for Cushion–Ease rubber mat, Item# 171311. Asimple, multi–dimensional ramp system that utilizes very few parts and allows you to configure mats for a specific work station. In yellow. Measures 2 ft. x 3 ft. U.S.A. Factory shipped. Female"
Manufacturer: Northern Tool and Equipment
SKU: 171309
Category: Shop Supplies

5 in.L x 2 in.W x1.0625 in.HWith eye bolt
Manufacturer: Northern Tool and Equipment
SKU: 150144
Category: Shop Supplies

"A Kitty Mac Fresh Air Screen is the easiest way to enclose your garage so you can enjoy the fresh air without bugs and mosquitoes. 16ft. x 8ft. screen fits most double garage doors. Easy to installwith durable hook-and-loop mounting, usually done in fewer than 30 minutes. Garage door opens and closes without removing screen. Includes fiberglass screen with heavy-duty zippers on both sides, plus hook-and-loop material for attaching to garage door frame. A heavy-duty vinyl pouch at the base accepts 3/4 in. PVC piping (not included) for added rigidity and to roll up for vehicle access in or out of your garage. Built-in straps let you store the screen on your garage door frame without removing screen.U.S.A."
Manufacturer: Northern Tool and Equipment
SKU: 65521
Category: Tarps + Covers

3-3/4" 8000 RPM Tachometer features a contemporary satin black finish. State-of-the-art air core movement ensures accurate readings and quick pointer response. These tachs operate on 4, 6, or 8cylinder engines with standard, electronic ignitions with 12 volt power. Dial face dia.=3-3/4", Bezel dia.= 4-3/8", Case dia.=3-3/4", Case depth=3-3/4" Allow 1"-3" for Fittings & Tubing.
SKU: 74203
Category: Performance & Tune-Up AutoMeter Auto Gauge

"Rated up to 5000 PSI, this reel holds 150ft. of 3/8in. high pressure hose or 100ft. of 1/2in. high pressurehose. Heavy duty 16 gauge steel with hubs and flanges all welded for strength. Comes equipped with 6ft. of 3/8in. feed hose. Adjustable spring brake prevents backlash. Hose not included. Temperature range -20°F to 225°F."
Manufacturer: SP Systems
SKU: 1591518
Category: Air Tools

"Quality padlocks from the worlds largest padlock manufacturer. All Master Lock padlocks are individually tested for strength and durability,and each offers a limited lifetime guarantee. 1 1/8in. (29mm) wide laminated steel body for superior strength4-pin cylinder helps prevent picking3/16in. shackle for superior cut resistanceProprietary rustproofing for longer lifeLimited lifetime warrantyU.S.A.Model 7D"
Manufacturer: Master Lock
SKU: 178553
Category: Safety

Cushion sewn for flexibility. 1/2" wide with 1/2" arbor hole. Use with the wheel arbor Adapter (13064) withyour drill or 1/4" collet in your die grinder.
SKU: 13039
Category: Metal Buffing & Finishing Buffing Buffs

Super GLoss Clear is a polyester powder with superior flow-out characteristics for minimal orange peel.Cure at 375 degrees F for 20 minutes after flowout. One 8 oz bottle covers 10-20 sq. ft. Finish provided is 95% Gloss.
SKU: 10286
Category: HotCoat Powder Coating Powders Hi-Tech Colors

"Swisher zero-turn mowers offer easy handling and great maneuverability for mowing around trees, shrubs and obstacles. You get a powerful and reliable Briggs & Stratton Intek OHV engine, twin hydrostatic transmission, user-friendly controls, mid-mount mowing deck for a smoother cut and 360° turning radius. Infinite cutting height adjustment from 1 1/2in. to 3 1/2in. Electric blade clutch. 2-year limited warranty. Truck ship. Engine: 24 HP Briggs &Stratton Intek OHV EngineTransmission: Twin hydrostatic transmissionCutting Width: 60in. cutting widthHour and Amp Meter: Hour Meter OnlyDischarge: Side DischargeWheek Size: 4.10in. x 3.5-5in. front tires; 20in. x 10-8in. rear tiresBeverage Holder: YesModel ZT2460U.S.A."
Manufacturer: Swisher
SKU: 250066
Category: Grounds Maintenance

"Use with the QuickLatch® PRO and Professional Multi– Purpose Respirators. NIOSH approved. High–efficiency (P100) chlorine/hydrogen chloride (muriatic acid) cartridge/filter. Protectsagainst dust, fumes, mists & organic vapors. U.S.A."
Manufacturer: AO Safety
SKU: 174674
Category: Safety

This Kit includes the following 6"Buffs: one Sisal, two Spiral and one Loose; one each of the following Compounds: Emery, Tripoli, Stainless, and White Rouge; and instructions.
SKU: 13100
Category: Metal Buffing & Finishing Buffing Buffing Kits

"1 micron, carbon–wrapped cartridge for use with whole–house waterfilter Item# 108881. Helps reduce rust, sediment and odor while improving taste. 15,000 gallon/3–month cartridge."
Manufacturer: Flotec
SKU: 108887
Category: Shop Supplies

"Excavator moves on its rubber tracks, rotates 360° and digs with its moveable reach boom, stick and bucket. Sharply detailed. 1:50 scale. Die cast metal. Clear windows with interior detail. Free Tee Shirt Offer! Receive one free CAT LogoTee Shirt with each CAT Collectible item purchased. Free CAT Tee Shirts, size XL, will not be shown in your shopping cart, but will be added to your order as it is processed. Offer valid while supply lasts. Dimensions: 10 1/2 in. L x 3 1/2 in. W x 3 3/8 in. H"
Manufacturer: CAT
SKU: 199304
Category: Die-Cast Collectibles

"Multiple application winch to raiseor lower boats, sailboat keels, and more. Automatic brake holds load in position when handle is released. Minimum operating load of 50 Lbs. Rugged construction, 7in. handle. U.S.A. Weight Capacity: 1200 Lbs.Drum Diameter: 2 1/2in.Gear Ratio: 5.4:1Maximum Drum Cable Capacity: 7/32in. x 73ft."
Manufacturer: Dutton-Lainson
SKU: 129682
Category: Winches

"Boxed hydraulic hose. You can cut it to lengths you need and attach reusable couplings, sold separately. SAE 100R1, type AT. 2750 PSI. Made in the U.S.A. Size: 1/4in. x 50ft"
Manufacturer: Apache
SKU: 5004050
Category: Hydraulics

Ladder rack featuresrugged twin aluminum uprights that carry up to 250 lbs. Designed to fit any truck bed. 1 1/2in. square tubing. Mounts easily to truck bed with included hardware and instructions. U.S.A.
Manufacturer: Northern Industrial Tools
SKU: 330960
Category: Grounds Maintenance

Standard with EPDM gaskets. Interchangable with other couplings and adapters. Manufactured from glass reinfoced polypropylene. 1 1/2in x 1 1/4in
Manufacturer: Norwesco
SKU: 56717
Category: Water Pumps

Never Change Points Again PLUS - The Ignitor II offers the same easy, under the distributor cap, installation as the original Ignitor mentioned above with 3 times more available energy between 3000-5000 rpm, and nearly doubles available plug voltage. Legal inall 50 states and Canada (CARB E.O. #D-57-2).
SKU: 70015
Category: Performance & Tune-Up Ignition Electric Ignition Conversion

"Dual lenses, metal frame with built–in sideshields. Straight back padded metal temples with nose pad that floatsin all directions. Anti–scratch. 99.9% UV protection. Meets ANSI Z87.1–1989. U.S.A. Metal framesBlue mirror lens"
Manufacturer: AO Safety
SKU: 174662
Category: Safety

Use in applications where control valves are mounted externally away from power units. Flow and pressure to manifolds allow usage in many applications. Return port for returning oil back to tank. Check and relief valve. 9/16in.-18 SAE ports. Items 1076 and 1077 are for double acting cyinders; others are for single acting cylinders. U.S.A. Operation:Manual; 3-Position ValveGPM at 1600 PSI: 1.4Reservoir: 3 qt.
Manufacturer: Haldex Barnes Hydraulics
SKU: 1071
Category: Hydraulics

"Belt-driven air compressors are built with heavy duty cast iron cylinders and pump sleeves. Truck ship only. U.S.A. Honda 5.0 hp OHC engine, model# GC1608.2 CFM @ 90 PSI pumpCFM displacement: 11.3Maximum PSI: 130 PSISingle stageTwo cylinderOil included in pump, splash lubricationCast iron sleeve8 gallon twin tankTwo tank drain valves1.25in. air exchange tubeOil drain holesExtra 3/8in. tank port10in. pneumatic tiresErgonomic 1.25in. diameter handlesEngine idles when tank is fully charged2.5in. liquid filled gaugeBelt driveAll controls are located on one sideUnloader lever for easy startsPoly paint is baked on for ultimate rust prevention3/8in. NPT female ball valvePump sight glassRubber feet reduce vibration andnoiseHose reel/tool rack kit (Item# 45926) sold separately"
Manufacturer: NorthStar
SKU: 45920
Category: Air Compressors

Controls the speed of hydraulic motors. Rated flow 0-30 GPM. This type of valve will start and stop a hydraulic motor or cylinder and vary the speed over a wide range. Once the speed is set it will remain constant regardless of load variation. Any remaining flow is bypassed to the excess flow port to return to tank or to power another hydraulic function. U.S.A. 3/4in. Port Size
Manufacturer: Prince
SKU: 2041
Category: Hydraulics

"Cuts through rusted bolts, exhaust brackets and steel panels 3000 blows per minute; 2 5/8in. stroke 5.5 CFM at 90 PSI; 1/4 NPT air inlet Includes 5 hardened steel chisels with .401 shank diameter, storage case"
Manufacturer: Northern Industrial Air Tools
SKU: 158220
Category: Air Tools

"Great for quick fixing, sealing, fastening,securing."
Manufacturer: Northern Tool and Equipment
SKU: 1711470
Category: Shop Supplies

"Use with tractors in 20-60 HP range. Fits category 1, 2, and 3 tractor hitches. Lifts up to 2000 lbs. Opens to 55in. (inside) and handles logs up to 3-ft. dia. Grapple locks at 90° for side loading. U.S.A. Pivots up to 135°in either directionPivot points have permanently-lubed bearingsHydraulic lines pass through pivot points to avoid stress on hosesShips assembled, ready for useModel SB-O3Truck shipU.S.A."
Manufacturer: Brave Products
SKU: 11970
Category: Ag Equipment + Excavating

"10,000-lb. capacity. Black powder coated ball mount has chrome ball. Buyers 2in. & 2 5/16in. Ball Size U.S.A."
Manufacturer: Northern Tool and Equipment
SKU: 68532
Category: Towing

"Totally adjustable mobile shop base lets you move your tools without being locked into a fixed size! Expands from 12 in. x 12 in. to a 36 in. x 36 in. square or a 20 in. x 52 in. rectangle configuration, or anything in between. 4 offset 3 in. wheels for stability. U.S.A. 400-lb. capacity. Foot lever brakes. Rubber leveling feet. Easy assembly."
Manufacturer: Northern Tool and Equipment
SKU: 97230
Category: Material Handling

"315C Hydraulic Excavator has exceptional detail and features die-cast construction, moveable parts and precision-scaled size. 1:87 scale. Free Tee Shirt Offer! Receiveone free CAT Logo Tee Shirt with each CAT Collectible item purchased. Free CAT Tee Shirts, size XL, will not be shown in your shopping cart, but will be added to your order as it is processed. Offer valid while supply lasts."
Manufacturer: CAT
SKU: 199405
Category: Die-Cast Collectibles

"Versatile bins help you organize your work and storage areas for greater efficiency. Heavy-duty polypropylene with color molded right in. Virtually unbreakable, they are unaffected by weak acids and alkaline solutions. Waterproof and rustproof. Steam cleanable up to 250øF. 6 colors let you color code parts and tools. Optional dividers increase storage options.Optional windows maximize storage capacity, prevent spillage and protect parts from dust and dirt. Sold in cartons only. U.S.A. 11in. x 11in. x 5in. Ivory Qty. 6"
Manufacturer: Quantum
SKU: 278522I
Category: Storage

Perforated steel foot pedal for brake or throttle.Welded mounting shaft. Can be used for through-frame mounting. Dimensions: 6.5in.L x 2in.W x 1 3/8in.H
Manufacturer: Northern Tool and Equipment
SKU: 13820
Category: "Go-Karts, Mini-Bikes + Scooters"

"Laser cutting guide ensures precision miter cutting up to 45° left and right. Adjustable pivot fence allows cutting larger stock. Features 2 HPmotor, trigger safety button and transparent blade guide. Includes extension wings, hold-down clamp, arbor wrench, dust bag and spare motor brushes."
Manufacturer: Northern Industrial Tools
SKU: 1591301
Category: Power Tools