2 1/16" 0-100 psi Carbon Fiber Fuel press gauge(M) @ Tools, Equipment & Painting online store

"This tough rolling cart is made of lightweight, durable structural foam that wont rust, dent, chip or peel. Integrated hinging flat-top work surface supports up to 250 lbs. (500–lb. overall weight capacity). Corrosion–resistant hardware supports top work surface in open position for easy access to divided compartment tray. Molded–in features include tool storagecompartments, cup holder and a work surface perimeter channel that keeps small parts/components and spilled liquids from rolling off. Easily maneuverable with raised “steering” handle, 2 fixed and 2 swivel, non–marking, lockable 5in. castersSliding, 40–lb.–capacity lockable metal drawerStep–ladder and extension–cord hooks3–outlet surge protected power strip, 15–ft. cord with wrap36in.W x 24in.D x 33in.H.U.S.A."
Manufacturer: Rubbermaid
SKU: 250254
Category: Material Handling

System One Polish is specially designed for the System One advanced polishing system. It is the safestand fastest way to polish paint.
SKU: 52216
Category: Styling, Care & Custom Car Care & Protection Cleaning & Polishing

"Ideal for small pressing jobs such as electric motor and armature repair and the installation of gears, bearings and other press fit parts. Press provides a 15 3/8in. x 22in. working area. Hydraulic power is supplied by ahydraulic hand pump complete with hose and fittings. Press bench space is 7 1/4in. x 25 1/4in. Overall height is 33 3/4in. Frame is shipped fully assembled. Made in the U.S.A."
Manufacturer: OTC
SKU: 151746
Category: Metal Fabrication

Remove Antennas Without Pliers - Pliers can slip and scratch painted surfaces. Antenna removal/replacement is eased with this unique tool. This set includes the Multipurpose antenna wrench,Code retriver for GM, Ford radio removal tool, Chrysler Radio Removal Socket, T10, T15 regular torx bits and TT7, TT10, and TT15 tamper resistant torx bits. Imported. One year manufacturer's warranty.
SKU: 43326
Category: Auto Body Body & Fender Body Tools & Accessories

Body Armor For Your Car - Designed to be placed anywhere you need to provide protection from stone chips, tar and other road debris while driving. Easily removable whenyou get there. Kit includes 2 sheets of 36" x 8" x.030" thick paintable double-faced magnetic plastic and instructions. Cut to desired shape, paint with spray touch-up and apply.
SKU: 31262
Category: Auto Body Body & Fender Body Tools & Accessories

"National Pipe Tapered Thread fittings for fuels. Rated up to 10,000 PSI. U.S.A. Size: 1/2in. F NPTF x3/4in. F NPTF"
Manufacturer: Buyers
SKU: 51CSF128
Category: Hydraulics

"Six 1–oz. replacement bottles of Dye–Lite dye for oil–based fluid system Item# 338745. Ideal for all circulating oil–based fluids: oil, fuel, ATF,power steering and hydraulics. Full–spectrum formula works with all lamps. 2 applications per 1–oz. bottle."
Manufacturer: Tracerline
SKU: 3387451
Category: Automotive

Gauge must be mounted outside of vehicle. Requires braided stainless steeltubing and mounting cup.
SKU: 74277
Category: Performance & Tune-Up AutoMeter Traditional Chrome

2-1/16"Single Pod Toyota Supra 1989-92 (RHD)
SKU: 75424
Category: Performance & Tune-Up AutoMeter Pods

An excellentresource if you are considering the purchase of welding equipment. Each of these four videos covers a different welding technique.
SKU: 19018
Category: Metal Shop Welding Books and Videos

"This system features four individual panels filled with tip out bins. Two are fixedto the back side of the system and two slide easily from left to right allowing free access to all four panels. Manufactured of tough 14-gauge steel with a powder-coat finish, the overall unit measures 16in. D x 48in. W x 67in. H. Bins are available. U.S.A. Number of Bins 28 Gray"
Manufacturer: Quantum
SKU: 278578G
Category: Storage

Removes water and dirt contamination to protect air tools & cylinders and painting equipment. Tool-Less element maintenance with a color coded alert system. Includes a brass automatic drain with a 4' 1/4" PVC drain line. 60 SCFM air flow rated at 1micron. 1/2" male NPT inlet and outlet. Made in USA
SKU: 34304
Category: Tools & Equipment Shop Equipment Air Compressors

"Ideal for automotive touch-up and restoration. High-volume, low-pressure (HVLP) design reduces “bounce-back“ of sprayed material and uses less fluid to complete the job. High-volume, low-pressure (HVLP) designSeparate spray pattern, fluid control and air adjustment valvesStainless steel needle and nozzle for longlife and corrosion resistanceNondrip 125cc cupRequires 4 CFM @ 45 PSI"
Manufacturer: Ingersoll Rand
SKU: 222082
Category: Painting

Pro-Comp liquid-filled gauges are designed for racing applications that may experience extreme vibration or violent pounding. The bourdon tube gauge mechanism is encased in a special dampening fluid to provide supersmooth pointer movement for any style of auto racing, baja, or off road competition. Each gauge features the preferred 270deg "full sweep" dial design for the enhanced visibility Auto Meter customers really count on. Includes a 1/2" NPT fitting and 6' of capillary tubing.
SKU: 74901
Category: Auto Accessories and Gifts

"Now you can make meat loaf, sausage, ground beef, turkey stuffing, fruit cobblers, vegetable sauces and many other delicious ground foods the easy way! Old World style cast iron grinder is good-sized: 12in.H x 4in.W x 12in.L. Bright plated; disassembles for easy cleanup. Clamps to a table edge up to 1 1/2in. thick. Includes sausagestuffer attachments in 3 sizes. Grinds 1.65 pounds per minute. Plate: 3/8in. Auger End to End: 8in.L Auger Twist: 5in.L Handle Shank: 2in."
Manufacturer: Northern Tool and Equipment
SKU: 168610
Category: Food Processing

MUSTANG POWER PANEL FOR 1979-83 (TOGGLE) #50420 - Mounts in radio/stereo location of 1979-86 5.0L Mustangs. Kit includes six colored LEDs, six heavy duty on/off toggle switches, one each of momentary and on/off/on switches color-coded TXL wire and peel and stick labels for custom wiring. Perfect for street or stripapplications!
SKU: 60184
Category: Performance & Tune-Up Electrical & Diagnostic Switch Controls

This Kit of Plastic Prep and Sand Free allows you to easily prep plastic interior parts where sanding is either difficult or not desired. Plastic Prep isused first to help clean the surface. The Sand Free slightly softens the plastic to assure adhesion of the vinyl dye.
SKU: 52042 Z
Category: Styling, Care & Custom Styling Custom Interior

This kit is for a 1972 Barracuda and contains Upper Side Stripe Kit, squeegee and instructions. Decal color is matte black.
SKU: 10861 001
Category: Styling, Care & Custom Phoenix Graphix Plymouth

The Cobalt Series features a black dial face, anodized bezel, white numbering, and blue accents. At night, an explosion of Cobalt blue light shines through the dial and into any interior scheme, from stock to shock. A glowing red gauge pointer provides clear contrast and visibility. Lit using LED technology,the Cobalt Series offers a lifetime of super cool lighting. Includes 1/8" NPT sender, 3/8" and 1/2" NPT fittings.
SKU: 75013
Category: Performance & Tune-Up AutoMeter Cobalt

"Securely attach a cargocarrier or winch to the front of your truck. Also handy for launching boats and other uses. U.S.A. For 2002-03 Dodge Ram PickupsU.S.A.Model 31320500 lb. tongue rating 9,000 lb straight line pull"
Manufacturer: Curt Manufacturing
SKU: 337801
Category: Towing

This kit has application for the 1970 Coronet and contains Bumble Bee Stripe Kit. Decalcolor is black.
SKU: 10766 001
Category: Styling, Care & Custom Phoenix Graphix Dodge

Cold-forged steel construction with steel ball bearings. 2 5/8in. x 1 1/2in. top plate with a 2 1/8in. x 1in. bolt pattern. Wheel Diameter: 2in. Capacity: 100 Lbs. Top Plate: 2 5/8in. x 1 1/2in. Bolt Pattern: 2 1/8in. x 1in. Wheel Type: Rigid Wheel width: 3/4in. Overall height: 2 5/8in. Riveted king pin Cold forged steel construction with steel ball bearings
Manufacturer: Gleason
SKU: 18946
Category: Casters

Not to be mistaken for ordinary silver paint, this coating actually contains zinc to protect your gas tank from rust. Many gas tanks came from the factory with a similar coating.For best results, remove all paint and undercoating from the tank before application. Works well over minor surface rust and helps stop its spread. Make your undercarriage detailing truly the best. Two cans are recommended for complete coverage on the average tank. Buy 3 or more and SAVE!
SKU: 10030 Z
Category: Rust Treatment Rust Prevention Bare Metal Coatings

The 1 1/2 HP 3600 RPM motor with 7/8" shaft is single phase, 60 hz and requires 13.8 amps at 115 vac or 6.9 amps at230 vac. Overall shaft length is about 30" The distance from housing to end of shaft is 7 1/4". * * Appropriate power chord needs to be attached.
SKU: 13007
Category: Metal Buffing & Finishing Buffing Motors / Accessories

"A must for all pressure washers! Includes 2 each of the following: 70D EPDM (in yellow, green, blue, red) and filter washer. Yellow ring = 14 mmGreen ring = 1/4 in.Blue ring = 3/8 in.Redring = 15 mm"
Manufacturer: GP General Pump
SKU: 228704
Category: Pressure Washers

Flakes may be added to any of our SHIMRIN UniversalBases, Kandys, Clears or Kustom Bases. Built from ultra thin polyester, our flakes are the lightest and easiest to use. This finish is usually applied over BC-25 (8513ZP 001 QT) Shimrin Black Base.
SKU: 8542 009 6OZ
Category: Auto Body House of Kolor Specialty Products

This kit applies to the 1947-54 GMC Pickup and contains 1 ''GMC'' Tailgate Name (2-3/4 in. X6-3/8 in. ''M'' and 2-3/4 in. X 5 in. ''G'' and ''C''), squeegee and instructions. Decal color is black.
SKU: 11093 001
Category: Styling, Care & Custom Phoenix Graphix Chevrolet

This stencil kit provides a paint mask for the user to recreate the original paint stipes. Thekit contains 2 header panel stencils (L and R), 2 front front fender front stencils (L and R), 2 front fender rear stencils (L and R), 2 door stipes (L and R), squeegee and Instructions. Paint mask color is black.
SKU: 10649 001
Category: Styling, Care & Custom Phoenix Graphix Chevrolet

"3.8 HP, 12V electric motor3-stage planetary gear systemCamaction clutch disengages gear system for free spoolingAutomatic load-holding brake9500 lbs. rated line pull12-ft. wire pendant remote95 feet of 5/16in. cable with clevis hook and safety latchHawse fairlead6-ft. battery cables and connectorsLimited lifetime warrantyModel 9.5eU.S.A."
Manufacturer: Ramsey Winch
SKU: 144194
Category: Winches

Ol Joint Jigger™ quickly notches tubing of upto 2 inch O.D. in less than 30 seconds. Great for assembling and welding tubing in your garage or workshop. Adjusts in single degree increments to make 60° angle notches. Automatic round tube centering and alignment. CNC machined steel construction. Bimetal hole saws not included. Use with your drill press or 1/2 inch hand drill. U.S.A.
Manufacturer: Northern Tool and Equipment
SKU: 152391
Category: Metal Fabrication

SHIMRIN FineMetallic Bases (FBC) are universal base coats that may simply be cleared for a final finish, or used as a base coat for Kandys. Due to their unique chemistry make-up, they may be top coated with either acrylic lacquer or urethane enamel. Use a Ko-Seal (8502ZP or 8503ZP) of similar hue for a uniform base.
SKU: 8511ZP 001 QT
Category: Auto Body Painting House of Kolor Paints

"Protect your gear and equipment from banging around in yourtrailer. Heavy duty steel ring and bracket have an 11,000-lb. rated capacity. Tie-downs and bolts not included. U.S.A. Ring is made of 1/2in. stock Inside measurement of ring: 2.5in. Accepts 3/8in. carriage bolts Safe working load is: 4080 Lbs. Breaking strength: 11781 Lbs."
Manufacturer: Buyers
SKU: 150086
Category: Towing

"Wheel chocks add security when changing a tire or parking on uneven terrain. U.S.A. All steel Heavy duty Hinged constructionCapacity: 40,000 Lbs Color: Yellow Each chock measures: 9in.L x 6 5/8in.W x 6in.H"
Manufacturer: Northern Tool and Equipment
SKU: 14618
Category: Automotive

Full face and eye protection is a must whenever you use aMIG, TIG, or Stick Welder. Most customers find that this Auto-Dimming helmet immediately improves their welding technique. This auto darkening helmet is an easy viewing shade 5 then swithces to the user selected 9-13 shade in 2 milliseconds when the arc is struck. Lens has viewing area of 3.5"x1.5". Solar powered assist plus two AAA alkaline batteries (included) for 1,000 welding hours. Meets CE/ANSI.
SKU: 11183
Category: Metal Shop Welding Welding Helmets

RF CONTROL STEERING WHEEL MAHOGANY GRIP DELUXE #20315 - Custom steering wheel with integratedRadio Frequency technology. Operate accessories both wirelessly and remotely. Four- way programmable transmitter operates up to six accessories, receiver included. Program accessories to act momentarily (when button is pushed), when ignition is on, constant hot, or for timed use. Engineered to fit most popular steering columns. Deluxe models do not show fastenings securing RF technology to center of steering wheel. Installation instructions included.
SKU: 60082
Category: Performance & Tune-Up Electrical & Diagnostic RF Controls & Custom

This kit contains only thefront and rear bumper insert names. The decal color is gold.
SKU: 10703 001
Category: Styling, Care & Custom Phoenix Graphix Chevrolet

"Truxedo is an all-climate, soft roll-up tonneau cover for pickups. Black vinyl-coated, leather-grain fabric is the strongest in the industry. Kits arepreassembled and easily installed in about 20 minutes. Side rails mount to the inside li"
Manufacturer: Truxedo
SKU: 380601
Category: Automotive

SHIMRIN Universal Pearls (PC) are base coats that may be cleared for a final finish, or used as a base coat for Kandys or Pearls. Due to their unique chemistry make-up, they may be top coated with either acrylic lacquer or urethane enamel. These Pearls are most commonly used over BC-25 (8513ZP 001 QT)Shimrin Black Base or BC-26 (8513ZP 002 QT) Shimrin White Base.
SKU: 8514ZP 006 QT
Category: Auto Body Painting House of Kolor Paints

Catch every drop of mud, slush, grime,and fluids that leak or fall from your vehicle! The heavy duty 20-mil. vinyl and raised plastic edges hold gallons of liquid, keeping your garage floor clean and safe. Complete package is easily assembled with snap-together edges and simply cleaned with your shop vac. 1 year manufacturer's warranty. THIS ITEM MAY TAKE 10 DAYS TO 2 WEEKS FOR DELIVERY
SKU: 43229
Category: Tools & Equipment Shop Equipment Floor Coatings

Heavy-duty air compressor plugs into your vehicle’s 12 Volt receptacle to inflate truck and SUV tires. Builtin cooling fan. Also has a 4-way emergency light and quick-connect toggle chuck. Includes a 12 1/2ft. power cord. 3-year limited warranty.
Manufacturer: Northern Tool and Equipment
SKU: 2000425
Category: Tires + Wheels

These 270deg "full sweep" gauges feature a quality engineered bourdon tube design and durable, performance grade movements for unsurpassed accuracy under the most demandingconditions. Includes a 1/2" NPT fitting along with 8' of capillary tubing.
SKU: 74991
Category: Performance & Tune-Up AutoMeter Phantom

"Recoil start with large rewind for easier pulling Dura-Bore© cast iron cylinder sleeve Magnetron® electronic ignition 7/8in. x 3 5/32in. keyway and 2 woodruff key slots; 3/8in.-24 tapped end One-Start© float carburetor for quick, dependable starts Composite camshaft and aluminized lo-tone muffler 50-state emission compliant engine has dual clean air cleaner Muffler and exhaustmanifold included Model 121602-0515-E1 for use on walk-behind mowers; U.S.A."
Manufacturer: Briggs & Stratton
SKU: 70602
Category: Engines

The Mityvac lets one person successfully bleed brakes at the wheel, without depressing the pedal or wasting fluid. This versatile little pump moves about 1 cu. in. of fluid with each stroke, pulling out dirt, old fluid, and air. It develops and holds approximately 25 inches of vacuum. Kit includes pump, brake bleeding adapter package user's manual, 3 lengths of 1/4" I.D. tubing (1 1/2", 3", and 18"), 3" of 5/32" tubing and reservoirjar with transfer and storage lids.
SKU: 49040
Category: Performance & Tune-Up Brakes & Suspension Brake Bleeding Systems

"Automatic 3-speed. Operates both horizontally and vertically. Rugged 1/3 HP, 115 Volt motor. Slices most metals smoothly and quickly. Straight & angle cuts, horizontal &vertical cuts. Hydraulic feed; automatic shutoff. Housed in a wheeled cabinet with brakes for quick-positioning and has a cast iron base. Adjustable blade guides. Built-in cooling system. Truck Ship. Capacity Rectangular: 6.5in. x 10in.Capacity Round Stock: 6.5in.Motor Size: 3/4 HPInput Volts/Amps: 110Angle Cuts: 45° to 90°Horizontal/Vertical: Horizontal / VerticalBlade Speeds (fpm): 100 / 180 / 235Blade Size: 85in. x 3/4in.Overall Size: 51in. x 48in. x 24in.Stand: Enclosed Steel StandIncluded Accessories: Miter Gauge Vise, Oiler SystemModel: 145765"
Manufacturer: Northern Tool and Equipment
SKU: 145765
Category: Power Tools

This inner shaft fits the (13328) ProCraft Hanging Motor. This inner shaft can be used with original outer sheath if condition is good. For a replacement outer sheath order (13328 OS).
SKU: 13328 IS
Category: Metal Buffing & Finishing Buffing Motors / Accessories

Reduces humidity in air delivered to spray guns. Install at end of air line supplying air tools. An economicalalternative to expensive, wall-mounted desiccant drying systems. One year manufacturer's warranty. Made in USA.
SKU: 34570
Category: Auto Body Painting Paint Gun Accessories

Damaged Hardware Removers - Bolts with damaged rounded heads can be tough to remove with regular sockets. These special sockets feature hardened sockets with narrowing spiral flutes that grab tighter as torque is applied. Fits most hex heads from 3/8" to 3/4" (10mm-19mm). 10-piece Low Profile Twist Socket Set is turned with your socket or with your SAE open end or box wrench for low clearance overhead areas. Includes a durable plastic case, made in USA with Limited lifetimemanufacturer's warranty.
SKU: 43643
Category: Tools & Equipment Shop Tools Engine Tools

Occasionally the specially hardened Stretcher Jaws need to be replaced. These jawswill restore the like new performance to your Stretcher.
SKU: 28050
Category: Metal Shop Fabrication Bending

All HotCoat Powders are exclusively formulated for the HotCoat System. They are optimized to promote static charge for uniform coverage and finish. All are UV and fuel resistant. Packed in 8 oz.net wt. cans. Buy 3 or more, mix and match, any standard colors and SAVE! Larger quantity discounts available. Call for details.
SKU: 10102 5LBS
Category: HotCoat Powder Coating Powders Specialty Colors

Ultra Lite gaugesare the hottest instruments in professional motorsports today. High quality aluminum construction substantially reduces excess weight, making Ultra-Lite mechanical gauges the perfect choice for any type of racing. A satin anodized aluminum finish and bright red pointers bring a new aspect of style to conventional performance interiors. Requires braided stainless steel hose & mounting cups. Must be mounted outside of vehicle.
SKU: 74637
Category: Performance & Tune-Up AutoMeter Ultra-Lite

SHIMRIN Neons (NE) are universal base coats that may simply be cleared for a final finish, orused as a base coat for Kandys or Pearls. Due to their unique chemistry make-up, they may be top coated with either acrylic lacquer or urethane enamel. Neons are designed for high visual impact on racecar, boats,cycles, etc. Note: USE WITH DISCRETION!! Neons have limited lightfastness in the sun. Neons are not recommended for overall refinishing or where long life is a requirement. Neons are usually applied over 8513ZP Shimrin White BC-26.
SKU: 8509ZP 006 QT
Category: Auto Body Painting House of Kolor Paints

"National Pipe Tapered Thread fittings for fuels. Rated up to 10,000 PSI. U.S.A. Size: 3/4in. F NPTF x 3/4in. F NPTF"
Manufacturer: Buyers
SKU: 51CRF012
Category: Hydraulics

Chameleon Flair Colorsare specialty effect pigment colors with angle- dependent, color traveling effects. Chameleon Flair Colors have a soft flowing transition from one color into another. Color travel is viewable under even subtle lighting and is further intensified on curved objects with sharp contoursChameleon Flair Tint Bronze and Violet are tinting bases containing only the chameleon pigment and binder.Each is intended for application against a black background to enhance their effects.
SKU: 34455 001
Category: Auto Body Water Based Paint

Stubby Tire Buffer - Prevent slow air leaks. Use this air tool to smooth the tire bead area before mounting your tire. Tool requires 4-6 cfm at 90 psi.20,000 rpm max. Limited 2 year manufacturer's warranty. Made in the USA
SKU: 43557
Category: Tools & Equipment Shop Tools Pnuematic Tools

Holds lots of great gear! No brackets required. Mounts underneath the bed of larger trucks or to the side of any pickup bed. 12-gaugesteel door has a stainless steel paddle-handle lock and a heavy duty door chain. Built-in rain gutter surrounds door to keep the elements out. Corrosion-resistant finish inside and out. U.S.A. Inside Measurements: 36in.L x 18in.W x 18in.H
Manufacturer: Contico
SKU: 334291
Category: Automotive

"Wireless remotes for front mount Ramsey winches and virtually all electric, self-recovery front mount winchs. Remotes work without cables or switches. Easy toinstall and operates winches from up to 50ft. away. U.S.A. for Ramsey Electric Front Mount Winches"
Manufacturer: Ramsey Winch
SKU: 251200
Category: Winches

Ultra Lite gauges arethe hottest instruments in professional motorsports today. High quality aluminum construction substantially reduces excess weight, making Ultra-Lite mechanical gauges the perfect choice for any type of racing. A satin anodized aluminum finish and bright red pointers bring a new aspect of style to conventional performance interiors. Includes 6 ft. nylon tubing, 1/8" & 1/4" NPT fittings.
SKU: 74635
Category: Performance & Tune-Up AutoMeter Ultra-Lite

"Hose pulls off the reel parallel to the wall. Ideal for mounting to the side walls of houses, buildings or shops. Exclusive“interlock” design means the reel can be removed from the wall in just seconds. Mounts quickly to almost any vertical surface including masonry, 16in. stud walls, wood posts and steel beams. Stores and maintains a 5/8in. water hose up to 150ft. long. 2–year limited warranty. U.S.A. Factory shipped. Green"
Manufacturer: Rapid Reel
SKU: 160138
Category: Grounds Maintenance

Apply massive loosening force with the cam action of this impact driver. Easily frees rusted or frozen screws, nuts and bolts while avoiding the common problem of"rounding out" the fastener head. 1/2" drive body may be used with #2 or #3 Phillips, 8mm or 10mm wide slot bits, or attach your own impact socket. A simply hammer strike to the tool body forces the loosening action in either a left or right-hand direction. Chrome vanadium material.
SKU: 43334
Category: Tools & Equipment Shop Tools General Hand Tools

Prevent theft by securing your hitch. 5/8in. pin fits 2in. receiver tube. Chrome plated pin with black powder-coated lock. Includes 2 keys.
Manufacturer: Buyers
SKU: 330563
Category: Towing

"Turn your Makita tool into a convenient job light! Pod–style 3.0Ah (Ni-MH) batterywith built–in LED light is shock–proof, boasts high output and rotates in 10° increments for increased visibility. Minimal current draw won"
Manufacturer: Makita
SKU: 1591994
Category: Power Tools

Sound and Heat Insulation. The Insulatoris easily installed under carpets. foil backed insulating material reflects back up to 97% of radiant heat. 2'x 6'x 5/16" thick. Use with Insul-Tape (52144) and Sticky Stuff spray adhesive (52143) to form a continuous barrier.
SKU: 52142
Category: Performance & Tune-Up Drivetrain Heat Control

EMISSION HARNESS #60310 FOR PART #60193 - Installing a fuel injection harness and want to keep all your emissions devices intact? Harness activates the AIR Port solenoid control, AIR Diverter Solenoid or Canister Purge Solenoid tomeet local emissions standards.
SKU: 60213
Category: Performance & Tune-Up Electrical & Diagnostic Fuel Injection Harnesses

"Patented clamp design accommodates both top and side post battery terminals. Unlike alligator clamps, these 99.9% pure copper clamps require very little hand pressure to attach to terminals. Insulated cable remains flexible in extreme weather conditions. Ergonomic handles arechemical and impact resistant. Extreme heavy–duty, 4–gauge cable20–ft. length400 Amp rating"
Manufacturer: Copperhead Cables
SKU: 1618
Category: Automotive

Made of chrome–molybdenum steel with a slim head design and gearless ratchet mechanism for smooth operation. Less than3° sweep makes these ratchets ideal for confined areas. Includes storage tray.
Manufacturer: Northern Tool and Equipment
SKU: 90900
Category: Hand Tools

These 270deg "full sweep" gauges feature a quality engineered bourdon tube design and durable, performance grade movements for unsurpassed accuracy under the most demanding conditions. Includes 6 ft. nylon tubing, 1/8"& 1/4" NPT fittings.
SKU: 74983
Category: Performance & Tune-Up AutoMeter Phantom