69 Camaro SS Str. Kit-Hockey Stick-All Vinyl-Black @ Tools, Equipment & Painting online store

Now returning used tires to customers is easy and convenient. Ideal for passenger car tires. Sold in rolls of 250.U.S.A.
Manufacturer: Northern Tool and Equipment
SKU: 452413
Category: Clearance

When split seconds count you only have a fraction of that time to monitor your instruments. Ultra-Lite Full Sweep electric gauges aredesigned for the professional racer. 270 degree dial face provides the ultimate in clear visibility when you need it most. Gauges have the finest in high-end sending units for unsurpassed accuracy and dependability. They stand up to the pressure and you stay cool! Includes 1/8" NPT sender and 8' wiring harness. Single channel intake temperature includes temperature module and 2 fast response thermocouple probes.
SKU: 74620
Category: Performance & Tune-Up AutoMeter Ultra-Lite

Soft head fortapping wheel weights during installationPry hook for wheel weight removal
Manufacturer: ESCO
SKU: 1459604
Category: Tires + Wheels

Replace your aging pressure washer hose with this gray nonmarking 5400 PSI 3/8in. hose. Features 3/8in. stainless steel quick connect socket on one end and 3/8in. stainless steel plug on the other end. Includes bend restrictors on both ends. Size: 3/8in. x 150ft.4:1 burst to operating pressure ratioTemperaturerange: –20°F to 250°F
Manufacturer: Northern Tool and Equipment
SKU: 32098
Category: Pressure Washers

"Fits our Item#s 173251, 173255, and 173259 heaters.U.S.A."
Manufacturer: Pro Com
SKU: 173256
Category: Heaters + Stoves

Storing your car, boat or camper for extended periods of time can invite moisture and "undo" all of the hard work you put into your project. ZoneDry will put an end to that. Designed to absorb 100% its weight in moisture and features a color indicator tab to let you know when a replacement is needed. This non-toxic, economical desiccant is designed for serious moisture absorption, andshould be the last step before storing your vehicle.
SKU: 52208
Category: Tools & Equipment Shop Equipment Storage

Wood Slappers areused to form aluminum and steel over a shot bag or one of the forming heads. These Wood Slappers are constructed from hard maple and are sealed with a urethane coating. The wide range of curved surfaces provides a variety of shaping options. The leather face provides more gentle shaping.
SKU: 28231
Category: Metal Shop Fabrication Bending

"Tacks low–voltagewire and cable for TV, computers, phones and other electronics. Built–in wire guide. Unique staple design eliminates wire damage. Uses #14 H.D. staples and #15 cable tacker staples."
Manufacturer: Northern Tool and Equipment
SKU: 55861
Category: Hand Tools

Now the same great 1200 degree performance of our original High Temp Manifold Coating is available in convenient aerosol packaging.Each can is sufficient to coat 2 standard cast iron manifolds or about 6 square feet. 2 cans recommended for header systems.
SKU: 10394 Z
Category: Specialty Coatings Underhood Coatings High Temp / Exhaust Systems

MuscleGloss 1050 square foot system Dark Gray
SKU: 43587ZP 04
Category: Tools & Equipment Shop Equipment Clean Up & Maintenance

Kosmic Klears UC-35 is a medium solids clear and may be usedto topcoat any urethane enamel finish, including all SHIMRIN base coats.Dries fast and hard and may be color sanded and buffed next day. UFC-35 FLO-KLEAR is a lower solids Klear which may be used to topcoat any Kosmic Kolor urethane or polyurethane enamel finishes, or any of the SHIMRIN base coats. UFC-19 KOMPLY KLEAR II is a 1.9 VOC polyurethane clear coat with application properties of low solid clear coats, is 33% solids as applied and features excellent gloss, long flow out, and very good chemical and water resisitance.
SKU: 8519ZP 001 GAL
Category: Auto Body Painting House of Kolor Paints

"Reads and clears system codes on all OBD II (1996 and newer) vehicles. Reads diagnostic trouble codes (DTCs), Generic Engine Codes (POs), MFG and Spenitic Emission Codes (PIs). Great tool features one easy to use graphicLCD display. Automatically links to all protocols. Comes with 6ft. removable and serviceable data link connector cable."
Manufacturer: Equus Innova
SKU: 338825
Category: Automotive

3/8in. and 5/16in. blades are double edged for longlife Drill out spot welds on fenders and door Retractable pilot assures accurate cut
Manufacturer: Northern Tool and Equipment
SKU: 154830
Category: Welding

FULL cover in grey. Fits most sport bikes with fairings up to 1100CC. Covercraft's Pack-Lite WeatherShield Cover is weatherproof, breathable, UV resistant and dustproof. Just shakethe cover and it dries in minutes. It packs light and folds compactly.
SKU: CVFC105WG
Category: Styling, Care & Custom Car Care & Protection Motorcycle Covers

Eastwood's yellow ultra-high-molecular-weight plastic mallets stretch and form sheet metal. Screw secured head captures handle within forproper fit and allow the head top to be used for forming. Made in the USA.
SKU: 28119
Category: Metal Shop Fabrication Forming

"Corrosion resistant housing. Combination stop, tail, turn signals, side marker lights,license plate light. 20 ft. wiring harness."
Manufacturer: Peterson Manufacturing
SKU: 127829
Category: Trailers + Trailer Parts

High-quality industrial Pengo augers for Item# 191180Cast-steel boring head and pilot bit with forged-steel teethDurable cutting edge with replaceable teeth1 3/8in. round female hubUpto 30in. digging depth16in. bit size36in. overall length2-year limited warrantyU.S.A.
Manufacturer: Northern Tool and Equipment
SKU: 191184
Category: Ag Equipment + Excavating

This buff lasts twice as long as our (13041) 10" Loose Section 40 ply wheel while the 1" wide face speeds results onwider surfaces. Use this wheel with White Rouge (13001), or any of our Greaseless Compounds.
SKU: 13249
Category: Metal Buffing & Finishing Buffing Buffs

The Brown Rust Cutting Media quickly removes rust, paint and plated coatings about 3 times faster than the GreenRust Cutting Media. Abrasive is blended throughout so that fresh abrasive is constantly exposed. Reuse until it literally disappears.
SKU: 13451
Category: Metal Buffing & Finishing Surface Conditioning Vibratory Tumblers

"100-1000 ft.-lbs. working torqueMax. 1450 ft.-lbs. torque 5000 RPM @ free speed750 BPM10 CFM average airconsumption37 CFM @ load360° swivel inlet1/2 in. air inlet, 1/2 in. hose size1 1/4 in. standard bolt capacity20 inch overall length includes 6 inch anvilModel #IR285-6"
Manufacturer: Ingersoll Rand
SKU: 15414
Category: Air Tools

This kit includes the (13016) 10" Buffing Shop Kit,and the (13281) Eastwood Buff Motor, 3/4 hp, 2 speed, with 3/4" shaft. Please see individual components for additional information.
SKU: 13330
Category: Metal Buffing & Finishing Buffing Buffing Kits

"Transporting and lowering heavy, awkward one-ton loads is easy with this high-lifting truck. Lifts one ton loads to a max. height of 31 1/2in. or works to move standard pallets. Fork is 44 1/2in.L x 201/2in.W. Truck Ship."
Manufacturer: Northern Tool and Equipment
SKU: 143807
Category: Material Handling

"Includes grommet, bracket and/or electrical plugs as applicable2 1/2in. x1 1/4in.HardwiredAmberU.S.A."
Manufacturer: Peterson Manufacturing
SKU: 127806
Category: Trailers + Trailer Parts

One-piece construction eliminates stress build-up. Double ball bearings and seal ring keep lubrication in and dirt out. Corrosion-resistant grey epoxy finish. 2 5/8in. to3in. x 3in. to 3 5/8in. bolt hole spacing. 3/4in. king pin. Top plate size 4in. x 4 1/2in. Caster has a roller bearing. U.S.A. Wheel Size: 8in. x 2in. Mount Height: 9 1/2in. Capacity: 800 Lbs. Bolt Pattern: 2 5/8in. to 3in. x 3in. to 3 5/8in. Top Plate: 4in. x 4 1/2in. Wheel Type: Swivel Polyolefin
Manufacturer: Fairbanks
SKU: 189174
Category: Casters

This shank screws directly intothe Henrob Cobra gun.
SKU: 19203
Category: Metal Shop Welding Tips, Wire, Parts

"The sidewinder handle on this angle drill rotates 90° left or right for versatile drill positioning. The 10 Amp motor provides powerful performance and the toque limiter disengages the motor if the bit ever binds (low speed only). The tools heavy–duty side handlemeans extra support, and you can store the hex wrench in the adjustable top handle. An ergonomically designed grip provides even more comfort and less operator fatigue. this two–speed drill has a no–load speed of 300 RPM on low and 1200 RPM on high. Powerful 10 Amp motor2–speed switch: 0–300 RPM on low; 0–1200 RPM on highIncludes drill chuck, chuck key, key holder, hex wrench and plastic tool case that accommodates the drill with the self–feed bit attachedModel DA4031"
Manufacturer: Makita
SKU: 1591929
Category: Power Tools

The tough durable coating that seals and protects! Increase resale value, reduce maintenance and add a detailed look. Drop in liners can warp and trap water and contaminants that lead to bed corrosion. This two part epoxy is easy to apply with a wide brush, roller or sprayed with Undercoating Gun (16030A). Cured finish is flexible at low temperatures, offers a non-skid chip resistant finish. Adheres to firmly adhereing paint or bare metal. Degrease area to be coated and mask. One kit covers 32 squarefeet. Most truck beds require 2 kits. 2 or more kits are available at a discounted price.
SKU: 10429 Z
Category: Specialty Coatings Detail Coatings Truckbed Liners

New or a classic, any Harley-Davidson motorcycle should be protected from extended exposure to dirt,heat, moisture, and ultraviolet rays. Covercraft's Custom-Fit Harley-Davidson motorcycle cover includes steel cable reinforced grommets, heat shield, soft liner at windshield and fender area, and a free storage bag! For Touring Bikes -- will accommodate fairing / windscreen handlebars raised up to 16 inches, back rest / sissy bar up to 16 inches, highway pegs, wide handlebars. In Black Urethane.
SKU: CVHC152BU
Category: Styling, Care & Custom Car Care & Protection Motorcycle Covers

Wire Tie Tool - Tightensand neatly trims nylon ties. Much easier than hand tightening. A must for keeping underhood wiring and accessory installations neat. Made in USA.
SKU: 43592
Category: Tools & Equipment Shop Tools Engine Tools

This Glass Polishing Wheel is used with the Pro Glass Polishing Compound (40011B) to remove the windshiled wiper haze typicalof older vehicles. Not for the removal of deeper scratches. Try this simple test: Run your fingernail over the damaged area on the windshield. If your nail does not get caught on the scratch, then your windshield can be renewed using this wheel with compound. Backing flange fits 5/8"-11 threaded shafts. The included adapter allows this wheel to fit your electric drill. The Auto Glass Sealant (34017 ZC) helps stops water leaks.
SKU: 40011 A
Category: Styling, Care & Custom Plastic & Glass Repair Windshield repair

"Hooks onto chain withup to 3/8in. link. 15 1/2in. handle, 4in. take-up. 5400-lb. working load; 19,000-lb. breaking strength. Drop forged, heat-treated steel. Meets or exceeds CVSA Cargo Securement Guidelines. U.S.A."
Manufacturer: Dixie Industries
SKU: 15298
Category: Material Handling

Ultra Lite gauges are the hottest instruments in professional motorsports today. High quality aluminum construction substantially reduces excess weight, making Ultra-Litemechanical gauges the perfect choice for any type of racing. A satin anodized aluminum finish and bright red pointers bring a new aspect of style to conventional performance interiors.
SKU: 74629
Category: Performance & Tune-Up AutoMeter Ultra-Lite

Pneumatic Shear - Uses a central cutting blade acting against 2 adjacent fixed blades to produce distortion free cuts in up to 18-gauge steel. Comfortable pistol grip. Adjustableup to 2500 strokes per minute. Requires 7 cfm at 90-120 psi. One-year manufacturer's warranty. Imported. For a replacement center blade order (28118C).
SKU: 28118
Category: Metal Shop Fabrication Cutting

"Ergonomically designed framing hammer provides the perfect balance of power and weight. Unique design virtually eliminates shock and vibration. Cushioned, slip–proof (Grypton) grip helps absorb moisture and contours to the shape of your hand, providing all–daycomfort. U.S.A. Forged 25–oz. steel head provides perfect (rockwall) hardness for both head and clawHigh strength polypropylene jacket protects against overstrikeExtra–large round face"
Manufacturer: US Tape
SKU: 30074
Category: Hand Tools

From removal torepair to buffing, this step-by-step book provides all the guidance you need to restore stainless, aluminum and die-cast parts to like-new condition. Good info on tools, too. Softbound, 96 pages. By Jeff Lilly.
SKU: 13158
Category: Metal Buffing & Finishing Buffing Books & Videos

The Battery Extender provides year round, "hands off" battery maintenance. Simply hook up the Battery Extender and your worries are over. A 1 amp charge takes the battery up to full charge. Once at full charge, a variable current of up to 250 milliamps is automatically added as needed to maintain the battery at a precise level. 12 &16 Volt battery maintainer. LED signals 16 volt mode. Includes Battery Clips & Ring Terminals.
SKU: 75092
Category: Auto Accessories and Gifts

"Thermally protected open fan–cooled motor. Specific gravity to 1.1; ambient air temperature to 77°.Pump features leakproof, seal–less magnetic drives and is designed for in–line, non–submersible use in highly corrosive material. Volute, magnetic housing and impeller is glass–filled polypropylene to withstand highly corrosive material. Ceramic shaft and thrust washer are 99.5% pure alumina for long–lasting durability. Includes 6ft. power cord with 3–prong plug. 1200 GPH @ 1ft. head200° fluid temperature1in. FNPT intake1/2in.MNPT dischargeModel 584604"
Manufacturer: Little Giant
SKU: 108819
Category: Water Pumps

This Eastwood Complete Manual Transmission Kit includes all necessary bearings, seals, gaskets, synchronizers, springs, and bushings needed to rebuild your Borg Warner close and wide ratio with 16 spline output shaft and cast aluminum main case. Casting number T10-D1. A detailed exploded view is included.Factory shop manual suggested - professional installation recommended. Made in the USA.
SKU: 70606
Category: Performance & Tune-Up Drivetrain Transmission Kits

Sungold Metallic is a hybred Epoxy/Polyester blend with a bonded metallic additive to assure a uniform finish. Cures at 400 degrees F (204 degrees C) for 20 minutes after flow-out (that transition from drypowder to a liquid look) occurs. Produces a smooth 80-90% high gloss finish. May be topcoated with (10093) Gloss Clear or (10286) Super Gloss Clear for improved UV resistance, gloss and increased depth.
SKU: 10342 5LBS
Category: HotCoat Powder Coating Powders Specialty Colors

"High–intensity strobe flashes 72 time per minute, perfect forconstruction equipment and other working class vehicles. Operates on 12 to 24V DC with 8 joule output. Low–profile polycarbonate amber lens. Meets SAE Class 2 requirements. U.S.A."
Manufacturer: PSE Amber
SKU: 163559
Category: Safety

SHIMRIN Graphic Kolors (SG) are universal base coats that may simply be cleared for a final finish, or used as a base coat for Kandys or Pearls. Due to their unique chemistry make up, they may be top coated with either acrylic lacquer or urethane enamel. These Designer Pearls are usually applied over 8514ZP Shimrin White BC-26. See the Materials Guide pgs. 67-68 of the Tech Guide orour website for required quantity.
SKU: 8505ZP 007 QT
Category: Auto Body Painting House of Kolor Paints

Restore your chassis completely with this Restoration Kit. Got rust? Use the Rust Encapsulator. Rust Encapsulator works asan excellent rust preventative as well as a primer for your Chassis Black. The Chassis Black paint will allow you to correctly paint all of the suspension parts and frame on your project. Proper for all makes and models. It looks good and provides tough protection. It is specially formulated from a tough epoxy base to resist chips, salt and mud corrosion, and other forms of road abuse. It's high solids content provides up to 4 times the coverage of similar size aerosols.
SKU: 10072 Z BLK
Category: Specialty Coatings Detail Coatings Chassis

Pertronix Flame Thrower Street/Strip HEI Distributors - For superior performance without misfires up to a minimum of 7500 RPM. Features 67% more energy than stock HEI systems with twice the energy across the spark gap, machined aluminum housing, includes high dielectric strength cap with brass terminals, low resistance center brush, balanced rotor with nylon hold down screws, installedadjustable vacuum advance and mechanical advance kit with stamped weights and center plate. Legal in all 50 states and Canada (CARB E.O. #D-57-5). Made in the USA. One Year Manufacturer's Warranty.
SKU: 70040
Category: Performance & Tune-Up Ignition Distributors

"50 extra marker flags for use with electronic pet containment systems, such asItem# 3775. Flag: 4in. x 5in.Wire stake: 21in."
Manufacturer: Northern Tool and Equipment
SKU: 35490
Category: Outdoors

The Easy Way to Clean Windshields - Thorough glass detailing is now much easier! Triangular paddle system with 14" offset extension handle easily reaches into corners. Includes 2 triangular sponge faced paddles, and 3 reversible cleaning bonnets (one each: microfiber, cotton terry and nylon mesh) and instructions. Soft foam handle provides excellent control and comfort. Handle end is threaded to use with all common extensionpoles. Also works well on metal, plastic and wood! Replacement packs of 3 bonnets
SKU: 52243
Category: Styling, Care & Custom Car Care & Protection Cleaning & Polishing

Original type wheel as used on the 1967-1968 Mercury Cougar. Qualityaccurate reproduction of the original wheel. Wheel size is 14"x6" with a 4" backspace. Configuration is 5-lug with a 4.5 inch bolt pattern. Compatible with disc brake applications. Made in the USA.
SKU: 62040
Category: Styling, Care & Custom Specialty Wheels Ford Wheels

2 1/16" Boost-Vac30InHg/30 psi press gauge (M)
SKU: 74426
Category: Auto Accessories and Gifts

2" BY 12" P-DOLLY designed for Eastwood by Eddie Paul. Currently used in the Eddie Paul design studios, these are essentially "T" dollies with an offset and 3 various sized grooves machined into diameter. Perfect for forming channels, beads, bending tubing and bar stock. Machined of round 4140 steel,the heads are welded to 1/4" plate stock measuring 2" wide by 9" long. 4 evenly spaced 1/2" holes help to secure "P" dollies to their holder or vice. Made in USA.
SKU: 28393
Category: Metal Shop Fabrication Bending

Made of hard rock maple for long service. Use with tallow (#31016) to prevent solder from sticking and to keep the woodin top condition. Sold in sets only.
SKU: 31058 E
Category: Auto Body Panel Repair & Prep Leading / Body Solder

COURTESY LIGHT KIT #30702 -Easily install courtesy lights in your vehicle. Kit includes: door switches, wires and light sockets. For GM trucks 1967-72 use item no. 60109.
SKU: 60105
Category: Performance & Tune-Up Electrical & Diagnostic Relay Kits & Connectors

"Rebate Available DEWALT built high torque motor delivers 500 in-lbs of maximum torqueXRP™ extended run-time batteries provide long run-time & battery lifePatented 3-speed transmission features a max 3rd speed at 2,000 rpm1/2in. metal ratcheting chuck with carbide jaws helps to prevent bits from slippingSuperior ergonomics provides optimal balance, comfort and controlVoltage: 18 VChuck Size: 1/2in.Max. Torque: 500 in-lbsNumber of Speed Settings: 3RPM: 0-450/0-1,450/0-2,000Chuck Type: metal, single sleeveClutch Settings: 22Tool Weight: 5.9 lbsIncludes:1 hour charger, (2) 18V XRP™ batteries, 360° side handle, double-ended screwdriver bit and heavy-duty kit boxModel DC987KA"
Manufacturer: DEWALT
SKU: 399641
Category: Power Tools

Eight Piece Fiberglass Body and Fender Tool Kit- Includes one each of the following: 31216, 31226, 31036, 31039, 31063, 31032, 31072 (2 pieces).
SKU: 31284
Category: Auto Body Body & Fender Body Hammers

This Charcoal Gray/Dark Argent Paint has the correct tone, sheen, and original equipment look. Rally Wheel Charcoal Gray Paint is appropriate for styled steel wheels and backgrounds for chrome rims and center caps, especially for the Muscle Era cars. This high solids paint covers 6 sq. ft. or two to four wheels, depending on application. Acrylic Lacquer formulation. 50-60% gloss. Max.temp 250 degrees F. Net wt. 12 oz. Buy 3 or more and SAVE!
SKU: 10003 Z
Category: Specialty Coatings Wheel & Suspension Coatings Wheel

Ideal for any damagedreflective surface such as light bezels, inside of bumpers, bumper guards (overriders) and more! Apply over clean, rust-free surfaces. This acrylic lacquer is the closest paint to chrome plating and polished aluminum. NOT RECOMMENDED FOR PAINTING THE OUTSIDE SURFACES OF CHROME TRIM. One can covers 6 sq. ft., withstands up to 250 degrees F, low 3-6% gloss. For greater durability top coat with Diamond Clear Gloss for Painted Surfaces (10196Z). Buy 3 or more and SAVE!
SKU: 10005 Z
Category: Specialty Coatings Detail Coatings Metal Finishes

SMALL SWITCH KIT #80120 - 3 position headlight switch,a floor mounted dimmer, and two GM style grounding door jam switches.
SKU: 60298
Category: Performance & Tune-Up Electrical & Diagnostic Switch Controls

"5000 lbs. max. working pressure, 20,000 lbs. min. bursting pressure. 1/4 in. I. D., 1/4 in.NPT male both ends. Fits #109507 and other high pressure, air operated chassis pumps and hose reels. 10 ft. Z-Line"
Manufacturer: Northern Tool and Equipment
SKU: 50341
Category: Fuel Transfer + Lubrication

5/pk 24 Tooth ReciprocatingSaw Blades for 43377
SKU: 43377 B24
Category: Metal Shop Fabrication Cutting

4 CIRCUIT ATO FUSE CENTER #30002 -Use on any vehicle where additional circuits are needed. Ideal for in-line wiring applications, such as trailer wiring or when adding vehicle accessories. Uses ATO blade type automotive fuses up to 30 amps.
SKU: 60089
Category: Performance & Tune-Up Electrical & Diagnostic Auxilliary Fuse Boxes

Double-ball race swivel casters have double braking feature to lockthe swivel and prevent the wheel from rolling at the same time. Thermoplastic non-marking wheel protects floors and resists corrosion. 1 3/4in. x 2 7/8in. to 3in. bolt hole spacing. Top plate size: 2 3/4in. x 3 3/4in.. Wheel Size: 4in. x 1 1/4in. Mount Height: 5 5/16in. Capacity: 225 Lbs. Wheel Type: Swivel
Manufacturer: Fairbanks
SKU: 189703
Category: Casters

10 Gauge wire required for Amp gauge hook-up. Includes hardware.CAUTION:Use ammeter only on an alternator with a maximum output of 60 amps or less. Higher output alternators must use a voltmeter. Ammetermust be installed by an experienced mechanic.
SKU: 74269
Category: Performance & Tune-Up AutoMeter

"Deluxe aqueous brake washer with 15 gallon capacity includes heavy duty airpump, flo-thru brush and easy fluid adjustment valve. Flexible metal spigot with on-off valve and heavy duty drum dolly with two locking casters and two regular casters. Dual filtration system includes prefilter screen and asbestos sock filter which are designed to ensure clean solution at all times. Can be used as a portable parts washer or brake washer. KT model # 1435. Truck Ship. U.S.A."
Manufacturer: Kleentec
SKU: 38790
Category: Parts Washers

Cold-forged steel construction with steel ball bearings. Swivel castershave double ball bearing raceways. Riveted king pin. 2 1/2in. x 3 3/4in. top plate with a bolt hole spacing of 1 3/4in. x 2 3/4in.. Wheel Diameter: 4in. Capacity: 255 Lbs. Top Plate: 2 1/2in. x 3 3/4in. Bolt Pattern: 1 3/4in. x 2 3/4in. Wheel Type: Swivel
Manufacturer: Gleason
SKU: 18970
Category: Casters

"These heavy-duty, tough and dependable stack-and-nest totes are the ultimate reusable container for storage and transporting your valuable items in any application. These proven containers areavailable in nine sizes and three colors for efficiency and inventory control. U.S.A Bin size 19 1/2in x 13 1/2in x 8in Capacity .80 Cu. Ft. Blue"
Manufacturer: Quantum
SKU: 278594B
Category: Storage

Programmable speedo with LCD odometer will work with any 500 to 400,000 pulse/mile sender. (May be used with existing sender if car has one.) See sender options to convert from mechanicaltakeoff.
SKU: 74558
Category: Performance & Tune-Up AutoMeter Sport-Comp

Platform Fits the High-LiftingHydraulic Fork Truck. 8-gauge steel lift is 44 1/2 in. L x 20 1/2 in. W x 4 1/4 in. H.
Manufacturer: Northern Tool and Equipment
SKU: 143808
Category: Material Handling

4 SWITCH WATERPROOF SWITCH KIT WITH 4 TOGGLE ON/OFF SWITCHES #50840 - Durable, fully waterproof kitis perfect for off-road or other open vehicles. Includes push button start switch, toggle and accessory switch with pre-terminated wiring harness.
SKU: 60192
Category: Performance & Tune-Up Electrical & Diagnostic Switch Controls