Charger/Spr Bee Ramcharger Hood Scoop Decals-Black @ Tools, Equipment & Painting online store

Hi-Lite Interference Colors are used over any background color for ghostlike, color-highlighting effects. Hi-Lite Interference Colors are intended for use in very light layers of 1-3 coats.Their color-shifting effect is less pronounced than the GemChameleon Colors. The colors work well for subtle highlighting effects which are seen whenexposed to sunlight or a direct light source.
SKU: 34462 001
Category: Auto Body Water Based Paint

Auto Air Candy Colors are true candy colors. Candy Colors are transparent, brilliant colors that allow the underlying coat to interact with the light passing through the candy color. For awesome candied metal-flake finishes, mix Candy Colors directly 4500 Series Hot Rod Sparkle Series. Candy Colors may be intermixed with one another for custom candy blends. Please note: The Candy Colors will not look good until the clear is applied. The clear?s gloss will bringto life the Candy Colors.
SKU: 34526 001
Category: Auto Body Water Based Paint

12 volt DC accessory power outlet charges cell phones and other 12 volt accessories. High-intensity halogen bulbsWeather-resistant aluminum bodyCan be usedeither cordless or cordedBattery recharges from home or car
Manufacturer: Vector
SKU: 45694
Category: Lighting

Get back to the original look of a high performance set of instruments with the "Designer BlackT series. The classic black dial face with bold numbering, clear domed lens, and black chrome bezel makes this series the choice of top show car builders. Choose from a red or white pointer and use the red and green bulb covers (included) for fun night driving. Includes LCD odometer and trip odometer (requires sender if car does not have one).
SKU: 74071
Category: Performance & Tune-Up AutoMeter

"Includes 15in., 18in. and 24in. long bars."
Manufacturer: Grip
SKU: 152632
Category: Hand Tools

This kitcontains only the front and rear bumper insert names. The decal color is chrome.
SKU: 10709
Category: Styling, Care & Custom Phoenix Graphix Chevrolet

The most important tool to any pinstriper is a good striping brush. Handmade of choice 100% camel hair. Ferrules are treated with special adhesive to keep bristles from pulling out. Round handle lets you easily roll the brush on tight corners. The 2" bristles load well for long lines. Brushes come in plastic storage tubes. Stripes in six sizes from 1/8" to 1/2" wide.
SKU: 37059
Category: Auto Body Pinstriping / Airbrushing Pinstriping Brushes

These Auto gage 6000 RPM 2-3/4" Mini Tachometer and 1-1/2" Mini Gauges are specificaly desinged for limited space installations. Low RPM range offers maximum dial legibility.Auto gage instruments are engineered to monitor your engine with accuracy and tested to function with reliability. These compact instruments are easy to install. These tachs operate on 4, 6, or 8 cylinder engines with standard, electronic ignitions with 12volts. Bezel Dia.=2-1/4", Case Dia.=2-3/4", Case depth =3-1/4".
SKU: 74209
Category: Performance & Tune-Up AutoMeter Auto Gauge

"Permanent anchoring system is recommended for year-round Instant Garage installations. Manufacturer recommends a 30in. anchor for every 4in. of length. 30in. auger anchors with clamps are for dirt, sand and gravel.Auger anchor kit with clampsQuantity: 8"
Manufacturer: Canopy Factory
SKU: 65502
Category: Tarps + Covers

Medium Felt Bobs - Hard enoughfor good cutting action, soft enough to shape to the surface. Sold in 4 popular profiles. All bobs measure 3/4" dia., by 1 1/2" tall overall and are mounted on a 1/4" shaft. 15,000 rpm maximum operating speed.
SKU: 13289
Category: Metal Buffing & Finishing Buffing Buffs

Now you too can achieve show-winning finishes with the safest paint polishing system available! System includes: set of 3 pads, backing plate, microfiber wipe, large sponge, quartof System One Polish, instructional CD and written instructions.
SKU: 52215
Category: Styling, Care & Custom Car Care & Protection Cleaning & Polishing

"Drums rounded ends wont gouge or make ruts! Packs down new sod, seed and mole ridges. Durable polyethylene wont dent or rust. Handle included; 18in. X 24 in. sizeships UPS. U.S.A. Brinly-Hardy Push/Tow Type 18in. x 24in. Dimensions 28 Gals. Capacity 270 lbs. Filled Weight"
Manufacturer: Northern Tool and Equipment
SKU: 250595
Category: Grounds Maintenance

The KD Tool Power Bar goes where impact tools can't. Remove stubborn harmonic balancer bolts that arerusted or held with thread compound. Delivers a quick impact up to 600 ft/lbs. to break the most stubborn of fasteners free. Also great for lug nuts, pinion nuts, and other hard to reach under car fasteners. Imported.
SKU: 43668
Category: Performance & Tune-Up Engine

Ultra Lite gauges are the hottest instruments in professional motorsports today. High quality aluminum construction substantially reduces excess weight, making Ultra-Lite mechanical gauges the perfect choice for anytype of racing. A satin anodized aluminum finish and bright red pointers bring a new aspect of style to conventional performance interiors. Includes 1/2" NPT fittings and 8ft capillary tubing.
SKU: 74668
Category: Performance & Tune-Up AutoMeter Ultra-Lite

"Awesome electric bike will be a big hit in the neighborhood. It is propelled by DC motor to a top speed of 18 MPH. Chopper design features 20in. wheel in rear and 24in. in front, plus drag handlebars. Travels 18 to25 miles between charges. 450 Watt earth magnet 24V DC motor Speeds up to 18 MPHCruises 18 to 25 miles between chargesElectro Drive direct chain drive with built-in freewheelingChopper design20in. x 4.25in.rear wheel and 24in. front wheelDrag bar handlebars with twist grip throttleLinear pull brakesChrome double crown chopper fork with oversized chrome headsetKickstand40 Amp PWM controller protects battery and motorRemovable twin 12V 12AH sealed lead acid battery packBattery pack recharges in 5 to 6 hours with included Smart Charger6-month limited warranty on components;3-month limited warranty on battery; 1-month limited warranty on tiresModel IZ0BK500-BK"
Manufacturer: I-Zip
SKU: 13186
Category: Sporting Goods + Toys

Not glossy, not dull, just right! Authentic 60-70% gloss looks great on suspension parts and frame. Proper for all makes and models. Tough modified epoxy formulation resists chips,corrosion and temperatures up to 300 degrees F. Works great over bare metal or Eastwood Rust Encapsulator. NOT RECOMMENDED for use over SINGLE STAGE SELF-ETCHING PRIMERS. Each Gallon covers 160 square feet. Provided in sprayable consistancy. Just stir, strain andspray. Buy 3 or more and save.
SKU: 10425 ZP
Category: Rust Treatment Rust Prevention Bare Metal Coatings

Lens Repair Kit - Replacement tail lamp lenses can be expensive. Now it's easy to repair cracks and small missing sections with the Lens Repair Kits from Plasti Fix. This kit includes 30 grams of each color; Red, Amber and Clear, 230 ml. of PlastiFix Liquid, 3 disposable mixing cups, mixing sticks, Dropper Bottle, 2 needle applicators, FlexMold molding bar, pipet, and complete instructions.Enough materialsfor several repairs in red, amber and clear lenses.
SKU: 52242
Category: Styling, Care & Custom Plastic & Glass Repair Headlight / Taillight Repair

The correct color and quality engine paint is the foundation of a well detailed engine compartment. Quick drying acrylic enamel, high 80-90% gloss finishis heat resistant to 300 degrees F. Colors shown are approximate. 12 oz. net wt. Enough to cover 6 square feet. Buy 2 or more and SAVE!
SKU: 10122 Z
Category: Specialty Coatings Underhood Coatings Engine Paints

Thiskit contains 2 Large front door stripes, 2 Front fender stripes, 2 Front air deflector stripes, 1 Front air dam stripe, 3 Rear spoiler stripes (Left, Center, Right), 1 Inner hood decal (teardrop style), 1 Outer hood decal (teardrop style), 1 Front header panel Z28 logo, squeegee and instructions. Decal color is light gold and dark gold.
SKU: 10668 001
Category: Styling, Care & Custom Phoenix Graphix Chevrolet

Remote Master Disconnect Kit w/ Emer. PushButton
SKU: 60435
Category: Auto Accessories and Gifts

Electric gauges provide a no-nonsense installation and are theperfect choice to be used with Gauge Works mounting accessories.
SKU: 74963
Category: Performance & Tune-Up AutoMeter Phantom

"For Wide Area Walk Behind mowers with a manual clutch.This engine does not have a 15 amp unregulated charging system. This engine has a remote oil filter which can be mounted in the most accessible spot. Truck Ship. Fits Ransomes, Exmark and other air-cooled vertical shaft unitsRemote oil filter mountingKohler model# CV15T-41583OHVElectronic ignitionRecoil startFull pressure lubricationSpin-on oil filterCast iron cylinder linerQuiet pillow mufflerSMART-CHOKE™ carburatorDual element air cleaner426 CC displacement2 qt. oil capacityCast iron cylinderAluminum block17.8 in.L x 17.67 in.W x 14.1 in.H overall dimensions1in. x 3.15 in. shaft with 1/4in. keyway"
Manufacturer: Kohler
SKU: 70152
Category: Engines

Under floors, in doors, behind dashboards - short circuits can happen anywhere, and can be difficult to locate. Connect the leads of theshort circuit tester at the fuse box, move the meter along the circuit. When the needle stops,you've found the short. Includes case.
SKU: 25026
Category: Performance & Tune-Up Electrical & Diagnostic Diagnostic Testers

Includes 1/8" NPT sender and 1/4" NPTfittings.
SKU: 74567
Category: Performance & Tune-Up AutoMeter Lunar

Cosmic Sparkle Colors create a refined, star-like subtle shimmer effect. Cosmic Sparkle Colors have a more narrow size particle effect pigment then the Hot Rod Sparkle Colors. Cosmic Sparkle Colors are semi-translucent colors with a semi-gloss finish.Cosmic Sparkle Colors are best used over Auto Air Base CoatSealer Dark or Auto Air 4200 Series Deep Black Graphic Colors Apply 1-2 light coats of Auto Air Base Coat Sealer Dark and 2-4 coats of Cosmic Sparkle Colors.
SKU: 34481 001
Category: Auto Body Water Based Paint

Ideal for mobile applications. Clockwise rotation. Low power-to-weight ratio and low noise. Hydraulically balanced to reduce wear and eliminate bearing loads. 4-bolt split flanged ports. SAE 2-bolt mounting flange. Maximum at 1200 RPM: 42 Maximum PSI: 2250 Inlet RPM: 2200 Keyed Outlet: 3in. and 1 1/2in.Mounting Shaft: 1 1/4in. Flange Type: C
Manufacturer: Northern Tool and Equipment
SKU: 104542
Category: Hydraulics

Use this laser-cut freehand airbrush template to expand your repertoire of custom graphic effects. Made from a solventproof flexibleplastic for easy use on flat or curved surfaces like fenders, motorcycle tanks, and helmets. This Patriotica Template "Eagle One" (PTR-4SP) by Craig Fraser provides another dimension for your next work of art. See our website www.eastwood.com for this and other template images.
SKU: 37294
Category: Auto Body Pinstriping / Airbrushing Airbrushing Stencils & Templates

SHIMRIN Designer Pearls (PBC) are universal base coats that may be cleared for a final finish, or used as a base coat for Kandys or Pearls. Due to their unique chemistry make-up, they may be top coated with either acrylic lacquer or urethane enamel. These Designer Pearls are usually applied over 8514ZP Shimrin White BC-26. See the Materials Guide pgs. 67-68 of the Tech Guide orour website for required quantity.
SKU: 8507ZP 008 QT
Category: Auto Body Painting House of Kolor Paints

Heavy-duty 8-gauge staples are barbed for superior holding power. 352 staples per box; 16 stripswith 22 staples per strip. U.S.A. 1 1/4in.
Manufacturer: Northern Tool and Equipment
SKU: 143973
Category: Ag Equipment + Excavating

The Model 130 MIG welds up to 3/16" steel. 4 heat settings and infinitely adjustable speed control dials-in the perfect setting. Max. output 100 amps with 30% duty cycle. Requires 120 Volts 60cycle 15-amp circuit. Welder measures 11" wide by 15" high by 19" deep. includes cart, dual gauge regulator, helmet, 1# spool of.035" flux core wire, gas conversion kit with 1# spool of.023" mild steel wire and written and video instructions. Clarke welders carry a 1-year manufacturer's warranty plus 10-year warranty on power transformer. Made in Italy. Welder weighs 53 lbs. Pkg weighs 91 lbs. Heavy Charges Apply.
SKU: 19225
Category: Metal Shop Welding Welders

2-1/16" Dual Pod Honda Civic 1996-98 CarbonFiber
SKU: 75365
Category: Performance & Tune-Up AutoMeter Pods

Reproduction style replacement center cap used on the Oldsmobile SS-1 Wheel. A quality reproduction, these caps complete and complement the new replacementwheels.
SKU: 62150
Category: Styling, Care & Custom Specialty Wheels

Kevlar(R) Hose Kit- Kevlar Hose is lightweight* yet extremely strong and flexible. Perfect for pressure gauges, these hoses have a working pressure of 2900 lbs. and aburst pressure of 8,800 lbs. The blue color also creates a clean custom look under the hood for the ultimate in strength and style. Half the weight of the Braided Stainless Steel Hose Kits Includes -4AN Fittings.
SKU: 74413
Category: Auto Accessories and Gifts

Ultra Lite gaugesare the hottest instruments in professional motorsports today. High quality aluminum construction substantially reduces excess weight, making Ultra-Lite mechanical gauges the perfect choice for any type of racing. A satin anodized aluminum finish and bright red pointers bring a new aspect of style to conventional performance interiors. Includes 12ft tubing
SKU: 74659
Category: Auto Accessories and Gifts

Cleaner Contacts = Better Performance - Dirty contacts cause many poor running conditions, audio system "noise" and inoperative accessories. DeoxIT dissolves oxides and lubricates to restore switches, connectors, relay contacts, etc. DeoxITPen (25111) w/abrasive tapered application tip, reaches recessed areas. DeoxIT Spray (25110) with 3-5/8" extension wand reaches into relay housings, recessed contacts and plugs. The Complete Electrical Cleaning & Protection Kit (25112) includes the DeoxiIT Pen and Spray, Kopre Shield (25002), & Fiberglass Rust Brush (34119) to readily treat ground lugs, starter contacts and more.
SKU: 25110
Category: Performance & Tune-Up Electrical & Diagnostic Tools & Accessories

1/4in. capacity. Working load rating of 250 lbs. Max.breaking strength of 880 lbs.
Manufacturer: Northern Industrial Tools
SKU: 143109
Category: Material Handling

For Adapting Oil Pressureand Temperature Gauges to Most Foreign Cars. 1/8" NPT to M16x1.5
SKU: 74193
Category: Auto Accessories and Gifts

"National PipeTapered Thread fittings for fuels. Rated up to 10,000 PSI. U.S.A. Size: 3/8in. F NPTF"
Manufacturer: Buyers
SKU: 51CTF006
Category: Hydraulics

When doing bodywork and replacing panels, make sure the left is the exact same shape as the right. Profile gauge accurately duplicates shapes that are almost impossible to sight with the naked eye. Just press against any panel and the individually sprung plastic blades produce a mirror image. Hundreds of uses. Especially handy when fitting floor boards around steeringcolumns and pedals. Reproduces details as deep as 1 3/4". Imported.
SKU: 31065
Category: Auto Body Body & Fender Body Tools & Accessories

MBC Shimrin Metallic Bases feature the largest metallic particle size of all House of Kolor finishes for exceptional sparkle and brightness. Available in 3 unique finishes: Pale Gold, Platinum, and Black Diamond. When used as a base under Kandy finshes, 8560ZP QT001 (MBC01Q) is used to make bright dazzling Kandy colors while 8560ZP QT003 (MBC03Q) can be used to make dark Kandy colors. 8560ZP QT002 (MBC02Q) is a mediumcolor used to slightly darken Kandy colors.
SKU: 8560ZP QT 002
Category: Auto Accessories and Gifts

Phantom mechanical gauges are offered in both the popular 2-1/16" size and the race-styled 2-5/8" size. Oil pressure and water temperature are also available in a specialty 3-3/8" version for enhanced visibility. These 270deg "full sweep" gauges feature a quality engineered bourdon tube design and durable, performance grade movements for unsurpassed accuracy under the most demanding conditions. Includes6 ft. nylon tubing, 1/8" & 1/4" NPT fittings.
SKU: 74930
Category: Auto Accessories and Gifts

TOURING cover in grey, fits largest size touring motorcycles, 1100CC and up, equipped with fairing, windshield,mirrors, saddle bags, sissy bar or backrest, travel chest, light bar. Covercraft's Pack-Lite WeatherShield Cover is weatherproof, breathable, UV resistant and dustproof. Just shake the cover and it dries in minutes. It packs light and folds compactly.
SKU: CVTC100WG
Category: Styling, Care & Custom Car Care & Protection Motorcycle Covers

TOURING cover in grey. Fits 500CC to 1000CC bikes, equipped with fairing, windshield, mirrors, saddle bags, sissy bar or backrest, travel chest, light bar. Covercraft's Pack-Lite WeatherShield Cover is weatherproof,breathable, UV resistant and dustproof. Just shake the cover and it dries in minutes. It packs light and folds compactly.
SKU: CVTC101WG
Category: Styling, Care & Custom Car Care & Protection Motorcycle Covers

"Organize and store your small parts with these modular storage cabinets. QuantumÜs new cabinets have the unique ability to interlock horizontally and vertically allowing you to customize your storage needs. Predrilled holes on the back side of cabinet allow for wall mounting. Cabinets are made from high impact polystyrene. Drawers are removable and willnot rust or corrode. Drawers have a recessed handle and come with a slotted label holder. Drawers have seven divider slots molded in so that it may be divided into multiple compartments. Clear window allows easy identification of parts contents. Nine preconfigured Interlocking Storage Cabinet Units come complete with drawers, clear windows and two dividers per drawer. Additional dividers may be purchased separately. Complete units available in Gray only. U.S.A. 16 Drawers"
Manufacturer: Quantum
SKU: 278564
Category: Storage

Make lifting big loads easier! Hard-cast steel pressure pump is heat treated in stress areas. Polishedcylinder with die-cut threads protect seal from abrasion. Bypass mechanism prevents internal damage from over-pumping. 12-ton capacity9 1/2in. low height18 5/8in. maximum height3 1/8in. screw adjustment
Manufacturer: Blackhawk Automotive
SKU: 144605
Category: Automotive

"Lift and lower heavy cargo for smooth, easy loading and unloading! Ideal for transporting machinery and big tool chests, unloading trucks and more. Foot-pedal operates hydraulic tabletop. Handle-mountedpressure release. Three month warranty. Lift Capacity: 300 lbs.Lift Range: 8 1/4 in. to 28 3/4 in. HTabletop L x W x Thickness: 27 1/2 in. x 17 3/4 in. x 1 3/8 in."
Manufacturer: Northern Industrial Tools
SKU: 143825
Category: Material Handling

Fuel Level (16 ohm empty/ 158 ohm full)- For 1989 topresent Fords.
SKU: 74439
Category: Auto Accessories and Gifts

The Auto Wash Stick's unique patented design extends almost 4 feet to easily wash high areas while also eliminating bending. The only washing tool that holds 18 oz. Of solution in its handle. Simply push forward to release the solution when needed, making lesstrips to the bucket while hands are kept dry and out of the water. Kit also includes ergonomically designed EZI Dry Squeegee to whisk away water fast and provide exceptional drying with flexible, twin-blade design. Synthetic lambs wool replacement bonnet included.
SKU: 52207
Category: Styling, Care & Custom Car Care & Protection Cleaning & Polishing

"ß 2.2 in.-lbs. of torque for more grinding power ß 10,000RPM no-load speed ß Dust-sealed motor for long tool life ß Safety-slip clutch prevents tool kickback ß Hard-wearing die-cast aluminum gear housing ß Model W7-115 Grinding Wheel Size: 4-1/2 in."
Manufacturer: Metabo
SKU: 143694
Category: Power Tools

"Includes spool gun and20ft. cable. No module required for hookup to IronMan welders. Fits Item# 1646955. For first time hookup, request Item# 164995, toggle switch with gas diverter, at no charge."
Manufacturer: Hobart
SKU: 164991
Category: Welding

"Add a light to your shed, barn or anywhere else without an electrical outlet! No wiring required — you get a solar panel, rechargeable batteries and8 Watt light. The sun provides all the power needed, recharging the built-in battery during day and running the light by night. Includes 12 feet of wire and all mounting hardware. Weatherproof design solar panel; even works in cloudy conditions. 5-year limited warranty."
Manufacturer: Northern Industrial Tools
SKU: 336614
Category: Outdoors

"Gets the job done FAST with a powerful 35,000 BTU burner. Heavy wall cast construction stands up to frequent movement from one location to the next. Limitedone year warranty. For outdoor use only. Propane tank and connector hose not included. Overall Width: 14 7/8in. Overall Height: 7 3/4in. Diameter of Burner: 6 7/8in. Orifice I.D.: 1/4in. Orifice O.D.: 5/8in. 14in. Diameter from control valves to outer ring"
Manufacturer: Northern Tool and Equipment
SKU: 330973
Category: Food Processing

uel Level (73 ohm empty/8-12 ohm full) Formost Ford and Chrysler vehicles.
SKU: 74097
Category: Performance & Tune-Up AutoMeter

2 5/8" 0-1600 F Pro-Comp E.G.Tgauge(E)
SKU: 74911
Category: Performance & Tune-Up AutoMeter Pro-Comp

Pertronix Flame Thrower Performance Spark Plug Wires - These premium spark plug wires give you the ultimate in high performance with a classic black OEM look. These wires offer the following features: 2 current paths (spiral wound stainless steel and carbon impregnated fiberglass), low 500 ohms per foot, Siliconejackets to resist high temperatures, moisture, oil and chemicals, EPDM rubber inner insulation for superior heat resistance and prevent arcing and voltage leaks and Fiberglass reinforcing braid for strength and flexibility. Limited lifetime manufacturer's warranty. Made in the USA.
SKU: 70030
Category: Performance & Tune-Up Ignition Wire

The Sand Shaper Wheel allows the ultimate in flexibility with abrasive paper for your aggressive cutting needs. The unique design prevents gouging and provides a smooth wave-free surface. The perforation on the bias prevents the material from ripping and allows for a smooth flow into recessedsurfaces. Can be used with 13119 Grinder's Grease.
SKU: 13430
Category: Metal Buffing & Finishing Surface Conditioning Abrasive Rolls & Tapers

Steel construction with corrosion-resistant spring mechanism. 55-lb. capacity with 4-oz. gradations.Easy-to-read dial. Excellent scale for anglers.
Manufacturer: Northern Industrial Tools
SKU: 19392
Category: Measuring Tools

"Heavy–duty wire shelving mobile cart resists corrosion, prevents the buildup of dustand dirt, improves the visibility of stored parts and allows for sprinkler penetration and ventilation. U.S.A. 36in.W x 24in.D x 40in.H3 shelvesSupports 800 lbs. per shelfComes complete with 4 castersU.S.A.Model WRC–2436–3"
Manufacturer: Quantum
SKU: 38294
Category: Storage

"Economical standard-duty grinderUse for porting, weld breaking, deburring, polishing, grindingSuperior maneuverability1/4 HP27,000 RPM1/4in. colletFront exhaust3 CFM air consumption14 CFM @load1/4in air inlet, 3/8in. minimum hoseModel IR307A"
Manufacturer: Ingersoll Rand
SKU: 158331
Category: Air Tools

2-1/16" Triple Pillar SuperDuty 1999-2001
SKU: 75253
Category: Performance & Tune-Up AutoMeter Pods

1/2" DASH INDICATOR LIGHT - BLUE #80211 - Conventional filament style indicator lamp provides clear visual indication of accessory status.
SKU: 60324
Category: Performance & Tune-Up Electrical & Diagnostic LEDs & Bulbs

Removing glued-in windshields can be tricky. The clearances between the dash- board and the inside of the glass is often too small for a knife to fit and prying on the glass will almost certainly break it. This handy kit contains everything you will need to remove your windshield safely, with minimal risk of breakage. Includes 72 feet of heavy duty wire which can be cut to length, an awl to feedthe wire between the glass and the sealing tape, two handles with allen set screws and an allen wrench to secure them.
SKU: 40007
Category: Styling, Care & Custom Plastic & Glass Repair Windshield repair

"For connecting generator output receptacles and either Reliance Raintight™ power inlet box or transfer switches with appropriate power inlets. Four conductor 120/240 Volt. Sturdy,all-weather construction. UL listed. 5-year limited warranty. U.S.A. 10 ft. length50 Amps12,500 Generator WattL14-50 plug/connector"
Manufacturer: Reliance Controls
SKU: 100170
Category: Generators

Special metalworking belts for gentle grinding and polishing. Long lasting. Size is 1 1/2" x 18 15/16". Use with Grinder's Grease for a smoother cut on steel or when leveling aluminum orother soft metals.
SKU: 13072
Category: Metal Buffing & Finishing Surface Conditioning Expander Wheels

"Knee boot with cleated outsole to spit out mud, snow and debris. Great for construction, farming or gardening. 2-stage PVC injection molded construction. Upper material stays flexible in cold weather. Removable cushion insole wicks perspiration to keep feet dry. Easy to sanitize both interior and exterior of boots. Mens Size 10"
Manufacturer: Tingley
SKU: 18123
Category: Gloves + Apparel

Designed to be used with the Stud Welder System, this tool makes it easy to repair minor dings and dents, due to hail, parking lots, etc. Just weld adraw-pin (stud) to the surface, attach the tool to the pin, slowly squeeze the handles until the dent is flush with the surface, then snip-off the draw pin.
SKU: 31014
Category: Auto Body Body & Fender Dent Repair Kits