"Ingersoll Rand 5.3 CFM @ 40 PSI, 2 HP Air Compressor, Model # DD2T2" @ Tools, Equipment & Painting online store

The most important tool to any pinstriper is a good pinstriping brush. Hand madeof choice blue squarrel hair. Ferrules are treated with adhesive to keep bristles from pulling out. Round handle lets you easily roll the brush on tight corners. The 2" bristle load well for long lines. Brushes come in plastic storage tubes. Stripes in six sizes from 1/8" to 1/2" wide.
SKU: 37056
Category: Auto Body Pinstriping / Airbrushing Pinstriping Brushes

"Use a flex coupling to mount your engine to pump. Synthetic rubber inserts between the coupling halves. When ordering, get one to fit the motor and one to fit the pump shaft diameter. Order two halves plus insert for complete coupling. Standard HalfLO 90 and LO 95 series, up to 11.16 HP at 3600 RPM. Maximum torque is 194in.-lbs. Size: 1/2in. Keyway 1/8in. W x 1/16in. D x 1in. L Inside Hole Diameter: 1/2in. Hole Length: 1in. Body: 2 1/8in. OD x 1in.Thick 3 Ears: 15/32in. Long 11/16in. Wide tapering in to 1/4in. 1/2in. Thick Set Screw: 5/16in. Diameter x 7/16in. Length"
Manufacturer: Northern Tool and Equipment
SKU: 3002
Category: Hydraulics

Ultralight thermoplastic shell with barbwire graphics and skull/iron cross logo. 2-year limited warranty. Turbo lens has 0.08 milliseconds switching speedAdjustable sensitivity and delay9-12variable shadeClear state of 4Two flash sensors1.59in. x 3.86in. viewing area4 1/4in. x 5 1/4in. complete lens size2-year limited warrantyModel 951P
Manufacturer: Northern Tool and Equipment
SKU: 164760
Category: Welding

Adapts JIC 37 degree tube to SAE straight thread O-ring boss-style fittings. U.S.A. Size: 3/4in. M JIC37x 1/2in. M STOR
Manufacturer: Buyers
SKU: 51GSM128
Category: Hydraulics

48in. W x 24in. D x 78in. H cabinet is 14-gauge. 137 removable Ultra Bins in high-impact polypropylene/polyethylene. U.S.A. Factory shipped 64 bins5 1/2in x 4 1/8in x 3in 64 bins 7 1/2in x 4 1/8in x 3in 3 bins 14 3/4in x 8 1/4in x 7in 6 bins 14 3/4in x 16 1/2in x 7in Black
Manufacturer: Quantum
SKU: 178513BK
Category: Storage

Decorative lens cover forlighted or unlighted receiver hitch covers. Fits Item# 331980.
Manufacturer: Northern Tool and Equipment
SKU: 331985
Category: Towing

One-piece construction eliminates stress build-up. Double ball bearings and seal ring keep lubrication in and dirt out. Corrosion-resistant grey epoxy finish. 2 5/8in. to 3in. x 3in. to 3 5/8in. bolt hole spacing. 3/4in. king pin. Top plate size 4in. x 4 1/2in. Caster has a roller bearing. U.S.A. Wheel Size: 6in. x 2in.Mount Height: 7 1/4in.Capacity: 750 Lbs.Bolt Pattern: 2 5/8in. to 3in. x 3in. to 3 5/8in.Top Plate: 4in. x 4 1/2in.Wheel Type: SwivelZinc-Plated Forks with Polyurethane Tread/Polyethylene Core Wheels
Manufacturer: Fairbanks
SKU: 18996
Category: Casters

"Great features and a great price make this air sander a good addition to your air tool collection. Uniqueergonomic design and rubber overmold create an excellent non-slip feel, while the rubber coating insulates from the cold. Composite body is lightweig"
Manufacturer: Northern Industrial Air Tools
SKU: 157781
Category: Air Tools

This kit contains 2 Front Fender Stripes, 2 Door Stripes, 2 Rear Quarter Panel Stripes with "R/T" Lettering, 1"R/T" Pinstripe Hood Decal, squeegee and instructions. Decal color is black.
SKU: 10834 001
Category: Styling, Care & Custom Phoenix Graphix Dodge

"Constructed from select kiln-dried hardwoods, this tough dolly features non-marking, polyolefin 4in.swivel hard-rubber casters. Platform, 18in. x 30in. 900 lb. capacity."
Manufacturer: Northern Tool and Equipment
SKU: 001871
Category: Material Handling

4-wheel cart with independent axle and high speed bearings make it easy going over rough terrain. Two I-beams with centered metal bushings provide an additional 12in. of clearance. Assembly required. Truck ship. U.S.A. Bed is 16-gauge steel and measures 58in. x 34in. x 14 3/4in.Powder-coat finish3/4in. solid steel axle16in. turftires750-lb. load capacityAssembly requiredTruck shipU.S.A.Model LC170RC
Manufacturer: Northern Tool and Equipment
SKU: 250456
Category: Grounds Maintenance

2in. x 3in. mirror with 16in. extension lets youlook behind and around things. Swivel ball joint and vinyl grip. U.S.A.
Manufacturer: Northern Tool and Equipment
SKU: 558489
Category: Automotive

Large 11in. x 8in. stainless steel platform provides smooth surface foroperations. Bright LED displays results with 0.005-lb. gradations and 66-lb. capacity. Scale is 11in. x 11in. x 4 3/4in. UL adapter.
Manufacturer: Northern Industrial Tools
SKU: 19391
Category: Measuring Tools

"Instructional video introduces the SMAW (Arc) welding process, featuring close-up welding demonstrations as seen through the welders helmet. Covers equipment setup, welding machines, AC/DC, DCRP and DCSP, electrode holders, amperage settings and more. Descriptions and demonstrations of common welding rods are provided.An excellent video for beginners to intermediate welders. DVDs sold individually. Approx. 44 min. U.S.A."
Manufacturer: Northern Tool and Equipment
SKU: 164207
Category: Welding

"Quick, easy approach for connecting different styles of accessories. Usewith chain of equal or lower working load limit. Each with screw pins. 1/4 in. bow diameter5/16 in. pin diameter1 1/4 in. inside length1/2 in. inside width25/32 in. bow width2000 lb. safe working load"
Manufacturer: Peerless
SKU: 336774
Category: Material Handling

Working pressure of 4500 PSI. 3/8in.pipe thread. Length: 120in.
Manufacturer: Apache
SKU: 50255
Category: Hydraulics

Keep it Clean. These grease fitting caps snap on and seal out dirt and moisture from entering critical areas thus helping to prolong the life of parts that need to be greased often. They feature a retaining ring that prevents them from being lost while servicing. The caps fit most automotive grease fittings(SAE J534). Both colors come in bags of 100.
SKU: 49057
Category: Styling, Care & Custom Car Care & Protection Vehicle Storage

UV resistant makes them ideal for use outdoors. Packagesof 1000 Size (:L x W): 7in x 3.6mm
Manufacturer: Northern Tool and Equipment
SKU: 171255
Category: Shop Supplies

Reach around corners with this angle driver! Replace those hard to use universal socket adapters - works with existing sockets and drivers. Durable heattreated alloy steel rods. Size: 1/4 in.
Manufacturer: Northern Tool and Equipment
SKU: 90961
Category: Hand Tools

This Hood is used with either (34054) or (34051) Half Face Mask HobbyAir System. This option greatlyenhances the protection provided by the HobbyAir Half Mask System and allows the use of eyeglasses.
SKU: 34042
Category: Auto Body Painting Breathing Apparatus

"3/4in. Super Duty Air Impact WrenchHammer action 1000 blows per minuteMax. torque to 1100 ft.-lbs. with less vibrationWorking torque 200 to 900 ft.-lbs.Pressure-feed lube for longer tool life9.5 average CFM38CFM @ load1/2in. minimum hose, 3/8in. inletFree speed 5500 RPM1in. bolt capacityModel IR-261-3one year limited warranty"
Manufacturer: Ingersoll Rand
SKU: 15409
Category: Air Tools

Heavy-Duty Anti Rust's spray-on brown wax film sticks to bare metal or painted surfaces. Won't crack, flake or peel. Will self-heal if scratched. Use inside doors and rockers, where painting will not be required. Forms an air and water tight barrier which prevents and slows rust. Product can also be used to protect fresh machined surfaces and baremetal parts during storage, and works great to seal body seams that are inaccessible. Buy 3 or more and SAVE!
SKU: 16017 ZP
Category: Rust Treatment Rust Prevention Bare Metal Coatings

"Projects horizontal and vertical beam with 1/16in. accuracy at 100 feet. Up to 2000 ft. range. Scanning feature. CW and CWW head positioning for fast, easy alignment in vertical/horizontal uses. Anti-driftsystem signals operator when unit is moved out of position. Horizontal and vertical beam with 1/16in. accuracy at 100 feetUp to 2000 ft. rangeScanning featureCW and CWW head positioning for fast, easy alignmentAnti-drift systemColor LED battery level indicators. Includes instructions and heavy-duty carrying case. 2-year limited warranty. U.S.A."
Manufacturer: David White
SKU: 433150
Category: Measuring Tools

"Includes1/16in., 1/8in., 3/16in., 1/4in., 3/8in., 1/2in., 5/8in., 3/4in., 7/8in. sizes."
Manufacturer: Performance Tool
SKU: 178216
Category: Shop Supplies

Random Orbit Action! Researched and developed for ultra fine finishing because the low profile design and vibration free motor insures full contact sanding without pad-wobble. Unique air efficiency designcreates more power with less air. The Flex Cover gives a comfortable grip and has a built in pad release feature.
SKU: 34147
Category: Tools & Equipment Shop Tools Body & Fender Tools

"Fits all popular folding camper trailers. Elastic bottom edge fora tight, custom fit. Rugged gray polypropylene cover is treated to repel and resist water. Reinforced stress points and interlocking seams. Tie-down rope. Fits Trailers: 14ft. to 16ft. Long"
Manufacturer: Northern Tool and Equipment
SKU: 450672
Category: Tarps + Covers

"Protect your ATV, sporting vehicle, boat or yard equipment with this economicalall-steel shelter. Measures 15ft.L x 12ft.W x 6ft.H. Features patented “Slip-Fit” connections for quick assembly and galvanized 2in. x 2in. steel tubing. Engineered to withstand 40 PSF snow and 90 MPH wind loads. Includes ground anchors. Truck ship. U.S.A."
Manufacturer: VersaTube
SKU: 65473
Category: Tarps + Covers

Rails stand 7 1/4 in. high for better load containment. Classic wood railshelp stabilize BIG loads
Manufacturer: Northern Tool and Equipment
SKU: 143603
Category: Grounds Maintenance

The legendary Gerber® EZ Out Jr.™ opens with one hand. Features a durable 2¬in surgical stainless steel blade and pocket clip for easy access. Soft Grip™ insertsare fused into virtually indestructible polycarbonate handles for superior grip and feel. Limited lifetime warranty. Blade Type: Fine Edge
Manufacturer: Gerber
SKU: 179004
Category: Sporting Goods + Toys

3/4in. drive chrome vanadium 1 1/4in. SAE standard socket.
Manufacturer: Northern Industrial Tools
SKU: 558204
Category: Hand Tools

Long-lasting zirconia abrasive discs take the place of resin fiber discsand grinding wheels. Help make weld joints almost undetectable and reduces need for final filler. Flap design runs cooler to reduce panel warping and won't gouge metal like ordinary grinding discs. Each flap disc will out last approximately 15 resin fiber discs. Order 1-2 grits coarser than resin fiber discs. Use on your high-speed grinders.
SKU: 19060 A
Category: Metal Shop Fabrication Prep & Finishing

"Includes straight pick, 90° hook, compound bend hook and round hook. Limitedlifetime warranty. U.S.A."
Manufacturer: Pratt Read Tools
SKU: 429960
Category: Hand Tools

Shieldsand protects garage floors and work surfaces Nonslip backing Cut to any size or shape
Manufacturer: Oil-Dry
SKU: 1095082
Category: Shop Supplies

"Medium-duty cord is designed for contractor and industrial uses. Ultra-flexible for cold weather use. Water resistant, ozone resistant and flame retardant. Orange. Molded-on connector and 3-wire grounded plug. UL listed and meetsOSHA standards. STJW: 16/3Length: 50ft.Amps: 10Watts: 1250"
Manufacturer: Prime
SKU: 162466
Category: Electrical

"Use to join two tarps together,create a waterproof seam or reinforce stress areas. Completely and UV resistant. Repairs tents, awnings, boat covers and more. U.S.A. Color: Blue"
Manufacturer: BAC Industries
SKU: 17700
Category: Tarps + Covers

"Die cast zinc top cap and one filter. For use with gasoline, gasohol and diesel fuels. Filters microscopic particles of rust, sand, dirt, scale and lint to 10 microns. Working pressure up to 50 PSI with a flow of 12 GPM. 510 sq. inches offiltering surface."
Manufacturer: Goldenrod
SKU: 170301
Category: Fuel Transfer + Lubrication

"Heavy duty service jack has a compact, low profile. Lift of 20in.. Min. height is 7in., max. is 27in.. Engineered in U.S.A. Manufactured by an ISO-9002 certified factory to comply with the applicable American National Standard. 57 3/4in.L x 167/8in.W. Ships by truck."
Manufacturer: Blackhawk
SKU: 144612
Category: Automotive

4 grade 8 hex head cap screw chrome plated 1/2 in. 20 x 2 1/2 in. bolts lock nutsplus flat and lock washers
Manufacturer: Northern Tool and Equipment
SKU: 129213
Category: Towing

Lifts motorcycles up to1500 lbs. to a full 47in. rise in 25 seconds. Operates on standard 110V current. Advanced locking system provides 5 locking height positions. Rear tie downs (included) can be moved anywhere on the side track and clamped down tight for secure lifting. Rear section detaches for complete rear–wheel access. Front wheel stop and vise helps position and secure bike while preventing wheel movement during lifting and maintenance. Minimum height: 6¬in.. Platform dimensions: 87¬in.L x 28¬in.W. Includes adjustable tool tray/side stand. Optional side extensions for ATVs Item# 144916 sold separately. Factory shipped.
Manufacturer: Rotary
SKU: 144915
Category: Automotive

"Unplug your vehiclesfactory wiring harness and plug in a TAP T-connector and extension. Trailer wiring has never been easier, with OEM connectors for a perfect, weather-tight fit. Fits 1998–2003 Jeep Wrangler"
Manufacturer: TAP
SKU: 632615
Category: Towing

"For use with worn-out gates or new installations. All-steel galvanized 1 1¬2in. square frame and fittings with a UV-protected powder-coated finish. Kit adjusts to fit all gate openings with a unique steel sleeve construction. Includes new hinges, lockable latch, assembly screws, adjustable diagonal truss cable systemand all steel gate frame. Your gate will never sag or drag again!"
Manufacturer: Northern Tool and Equipment
SKU: 25560
Category: Ag Equipment + Excavating

"1/4in.–, 3/8in.– and 1/2in.–drive ratchets each have 72 teeth, 5° sweep andoffset design for work in confined areas. Quick–release mechanism allows for easy socket changes. Limited lifetime warranty."
Manufacturer: Titan
SKU: 909100
Category: Hand Tools

"Lightweight helmet has a tough, impact-resistant thermoplastic outer shell and a soft, cushioned interior. Visor shades eyes from the sun. Choose from 5 colors in sizes Small, Medium, Large, or X-Large. Clear-coat graphicsAdjustable ventsNonslip goggle strap holderDOT approved Helmet Size Chart To determine head size, place a measuring tape approximately one inch above your eyebrows and just over your ears. Usethis chart to determine correct helmet size. Head Circumference Helmet Size 21 1/2in. - 21 7/8in. Small, 6 7/8 - 7 22 1/4in. - 22 5/8in. Medium, 7 1/8 - 7 1/4 23in. - 23 1/2in. Large, 7 3/8 - 7 1/2 23 7/8in. - 24 1/4in. X-Large, 7 5/8 - 7 3/4"
Manufacturer: Northern Tool and Equipment
SKU: 135875
Category: "Go-Karts, Mini-Bikes + Scooters"

"Set of 4. Cover snaps onto existing wheel in minutes with a full retaining ring to hold it in place. 8-lug design fits all yearsof Chevy, Ford and Dodge 2WD and 4WD dually rear-wheeled pickup trucks only. Center of cover pops out for 2WD and for 4WD access. Fits: 2 and 4 wheel drive Ford F350 models 1985-2004; Chevy/GMC 1973-current; Dodge 1969-2002. 1993 trucks and older with BUDD wheels will not fit. Easy to mount — no tools needed or lugnuts to remove. T304L stainless steel for lasting beauty and durability. 3-year limited warranty."
Manufacturer: Northern Tool and Equipment
SKU: 330900
Category: Tires + Wheels

You'll still need a manual, but these video guides are like an on-site expert when tearing down, inspecting and re-assembling popular automatic transmissions. Up close color - highlighted details and dialogue with sound. Watch and listen to those O-rings snap into place!VHS, 90 minutes.
SKU: 46021
Category: Performance & Tune-Up Drivetrain Books & Videos

"Whisper, our patented trimmer line, reduces noise levels by 50%. Comes with easy loading Pro T25 tap advance head. The E-TECH engine combines reduced emissions and low noise with a superior power/weight ratio. The straight shaft allows you longer reach. Transparent fuel tank for easy fuel level control. The easy adjusting loop handle can be adjusted without tools. Engine: 28cc, 1.1 HPCut Width: 16in.Line Feed: Bump feedShaft Style: StraightFlexAttachment Compatible: YesVibration Reduction: NoAdditional Features: Loop handle, solid trigger designWeight: 9.1 lbs.Model 123LU.S.A."
Manufacturer: Husqvarna
SKU: 195899
Category: Grounds Maintenance

Seals punctures of up to 1/4in. in tubeless tires. Works for two years. Wont freeze or dry up. Installs easily. Non hazardous. Water soluble. Not for punctures in sidewall or rim area. U.S.A. Slime Size: 1GallonFor: Multiple Tires with Pump
Manufacturer: Slime
SKU: 134706
Category: Tires + Wheels

Considered to be the finest quality toolstorage solution for serious enthusiasts, this unit can be used independantly or stacked in combination. Constructed entirely of 16ga powder coated steel, the unit features 120lb drawe slides, lockable 935lb sealed castors, welded side handles, secure cam lock system locks all drawers and cabinet doors, Industrial-quality welding througho Includes drawer liners. Dimensions: 30"w (762mm) x 32"H (851mm) x 26"D (660mm)
SKU: 11149
Category: Tools & Equipment Shop Equipment Storage

"Contractors 10-pack. Fully ground, 135° split-point tip."
Manufacturer: Northern Tool and Equipment
SKU: 98277
Category: Power Tools

Exclusive muffler/filter system produces half the noise of a standard impact wrench-the quietest air wrench on the market 1/2in. impact wrench features 640 ft.-lbs. of torquein both forward and reverse 4.0 CFM @ 90 PSI and 7000 RPM free speed 1/4in. air inlet; twin hammer mechanism with a patented ergonomic grip handle; U.S.A. 84 DB
Manufacturer: AirCat
SKU: 154170
Category: Air Tools

"Pumps come with cast iron sleeve and enough CFM to power most tools used on construction sites. Efficient compact design. CFM displacement - 18.115.9 CFM @ 90 PSIMaximum PSI - 175 PSIRated for 3 HP at 1200 RPM (170 psi max.), 4HP at 1450 RPM (130 psi max.)Bore - 2.36in., Stroke - 2.28in.Two stageTwo cylinderCast iron sleevePump rotates CCW as viewed from theflywheelUses one A groove beltOil sight glass13.8in. diameter flywheel/fan"
Manufacturer: NorthStar
SKU: 45930
Category: Air Compressors

"Tie rod construction, double acting, heavy duty, high strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 2500 and bursting PSI is 5000. These name brand cylinders carry a 3 year warranty. Seal kits are available also. The 2in., 3in., 3 1/2in., 4in. and 4 1/2in. bore cylinders have 1/2in. working ports and 1in. pins. One exception is 909708 which has 1 1/4in. pins. The 5in. bore cylinders have 1 1/4in. pins which are included and 3/4in. working ports. Bore: 4in. Stroke: 18in. Closed Pin Center Distance: 28 1/4in. Shaft: 1 3/4in."
Manufacturer: Prince
SKU: 909418
Category: Hydraulics

"Great sized tablefor tradesmen, garages, cookouts and more! Constructed of .125 aluminum and is strong enough to hold a complete disassembled engine. Tubular steel locking legs fold in for storage. Aluminum hat channel for bracing. 25in. x 64in. U.S.A."
Manufacturer: Northern Tool and Equipment
SKU: 3489922
Category: Shop Supplies

"Rope stays round, works great inpulleys, knots well. High quality nylon is elastic and absorbs sudden shocks. Works for marine, farm and many other uses. U.S.A."
Manufacturer: Northern Tool and Equipment
SKU: 45502090
Category: Material Handling

"From cutting plywood to drywall, IRWIN Hand Saws offer a complete product line. Featuring hard-point teeth that keep their edge and do not need resharpening. Comfortable, no-slip gripHigh quality steel bladeHard point teeth eliminatethe need to re-sharpen blade"
Manufacturer: Irwin
SKU: 962285
Category: Hand Tools

World-famous Autosol polish provides a brilliant gloss and long-lasting weather protection on all metals from aluminum to zinc. It removes rust and oxidation without excessive abrasion - perfect for chrome and nickel plated parts. Great for polishing fiberglass and plastics, too. Madein Germany.
SKU: 13175
Category: Metal Buffing & Finishing Buffing Compounds

"Cut perfect holes in METAL, wood or drywall for conduit, plumbing, door lock installation and more. Wear-resistant bi-metal construction and welded high speed steel teeth cut smoother and faster. Includes 7/8in., 1 1/8in., 1 3/8in., 1 3/4in., 2in. and 2 11/16in. hole sawsplus 2 mandrels and carrying case."
Manufacturer: Northern Industrial Tools
SKU: 56242
Category: Power Tools

This brightly colored mini jack is the exact scale model of an actual race jack! Makes a great conversation piece in a shop or office. Measures 8 in.L x 4 1/2 in.W x 2 1/2 in.H witha lift range of 1 in. to 3 in. Handle is 6 1/4 in. long. Blue color
Manufacturer: Torin Big Red
SKU: 144887
Category: Automotive

Standard-size heavy duty latch designed to mount in a 3 3/8in. x4 5/8in. recess opening.
Manufacturer: Buyers
SKU: 332311
Category: Shop Supplies

Curved bar clamp with non-marring swivel pads. Combines speed and convenience with controllable pressure just squeeze to adjustand lock! Easy one-handed operation; quick release trigger. U.S.A. 2in. Clamp Durable Resin Construction
Manufacturer: Northern Tool and Equipment
SKU: 189596
Category: Hand Tools

Working in closed areas? Don't take chances with your lungs! These Hobbyair systems deliver a steady supply of fresh, outside air while you work inside. The lightweight facemask, beltline hookup and snap-tight fittings combine to make this respirator system not only safe but comfortable and easy to wear. Fresh, ambient air is fed from a remote two-stage pump, via 40 feet of FDA- approved, kink-resistant hose, to the silicone rubber facemask. Motor runs on standard 110V AC current. All fittings are made of stainless steel and brass. NIOSH-approved units. Limited 1year manufacturer's warranty.
SKU: 34050
Category: Auto Body Painting Breathing Apparatus

Set of 7 Reamers - Precisely sizes holesin steel, aluminum, and bushing materials. Reamers can be turned by hand or with a wrench. Size can be adjusts by loosening one nut and tightening the other. Includes 1/4" to 9/32", 9/32" to 5/16", 5/16" to 11/32", 11/32" to 3/8", 3/8" to 13/32", 13/32" to 7/16", 7/16" to 15/32" Reamers in a wooden box. Imported. 30 day Eastwood warranty.
SKU: 43536
Category: Metal Shop Fabrication Accessories

Includes: 300–4in. Natural 400–4in. Colored 150–8in. Natural50–11in. Natural
Manufacturer: Northern Tool and Equipment
SKU: 171283
Category: Hand Tools

"For easy access to tools, hardware and supplies. 15 1/4in. L x6in. W x 8in. H."
Manufacturer: Mossy Oak
SKU: 178624
Category: Storage

"The small ratcheting box end design allows access to tight spots where a ratchet and socket or a conventional racheting box end will not fit. The GearWrench™ moves a fastener along anylength threaded rod without ever having to remove the wrench from the fastener. Surface Drive box end virtually eliminates the rounding of fasteners. Limited lifetime warranty. 18mm standard combination GearWrenchAll metal constructionFully hardened with nickel-chrome plated mirror finishMeets or exceeds ANSI, DIN and federal torque specificationsGearWrench needs as little as 5° to move a fastener, a standard 12 point wrench requires 30° or six times the roomLimited lifetime warranty"
Manufacturer: GearWrench
SKU: 558023
Category: Hand Tools

"24 CFM 175 PSI.Air cooled after-cooler, prewired magneticstarter, automatic condensate drain. Voltage availability: 200/3/60, 230/3/60, 460/3/60. Uses our #1592008 start-up kit. Truck Ship. U.S.A. Vertical design Fully packaged 80 Gallons"
Manufacturer: Ingersoll Rand
SKU: 15920030
Category: Air Compressors