Motorola Flexible Ear Receiver @ Tools, Equipment & Painting online store

"Powerful, easy-to-use and versatile, this loader carrier features dual torque tubes with double welded areas to create a strong, rugged support to the loaders mainframe. 8ft. 5in. lift height and 60in. bucketsize. High tensile steel pedestal for years of use. High strength mounting brackets for load distribution and GB tractor mounted joystick provides permanent dual remotes for the tractor. For use with Item# 188004. Truck ship."
Manufacturer: Northern Tool and Equipment
SKU: 188021
Category: Ag Equipment + Excavating

Gallons: 7 Suction Port: 2in. Return Port: 1in. Mount: 2-Bolt Dimensions: 16in.L x 10in.Wx 10 1/2in.H
Manufacturer: Northern Tool and Equipment
SKU: 4051
Category: Hydraulics

30ft. roll of 3/16in. round general purpose plastic weldingrod. U.S.A.
Manufacturer: Northern Tool and Equipment
SKU: 164742
Category: Automotive

"10 micron filtration system prevents tool and equipment damage and corrects air plumbing. Removes 12 oz. of moisture per minute. Has reverse–flow technology, noncorrosive coated interior and super large sump. Features best float drain and largest stainless steel element. Installs atpoint of use and is virtually maintenance free."
Manufacturer: Northern Tool and Equipment
SKU: 1502041
Category: Air Tools

"Turn on your generator during power failure and keep appliances and lights working! Automatic transfer switch monitors incoming voltage from utility lines and immediately signals the generator when power is interrupted. Within seconds, your standby generator begins supplying electricity. Internal adjustment on this 3-phase switch allows voltage changeover by owner/installer to 120/208V, 120/240V, 277/480Vor 347/600V. U.S.A. Three phase225 AmpsNEMA-3R ratedU.S.A.Model SPC-225-CH3"
Manufacturer: Cutler-Hammer
SKU: 162337
Category: Generators

"Truxedo is an all-climate, soft roll-up tonneau cover for pickups. Black vinyl-coated, leather-grainfabric is the strongest in the industry. Kits are preassembled and easily installed in about 20 minutes. Side rails mount to the inside lip of the truck b"
Manufacturer: Truxedo
SKU: 390101
Category: Automotive

Full Flite auger bitsfor item 191156. U.S.A. Bit Size: 6in. Flite: Full
Manufacturer: Hoffco
SKU: 1911572
Category: Ag Equipment + Excavating

Same great features as the7" discs but designed for use on 4" and 4 1/2" electric grinders. Maximum speed: 10,000 rpm. NOTE: Requires (31073) 4-1/2" Backing Pad. Fits grinders with 5/8-11 shaft.
SKU: 31094
Category: Auto Body Body & Fender Cleaning & Stripping

"Complete driveline is economical and easy to install, so you dont have to spend time trying to repair damaged or worn shafts. Can be cut to desired length to meet your driveline needs. Meets all ASAE standards. Series: 2Common use: Post hole diggersHP: 20Compressed length: 47in.Tractor yoke: 1 3/8in. x 6 spline quick-disconnectImplement yoke: 1 3/8in. x6 spline quick-disconnectModel CS23911"
Manufacturer: Northern Tool and Equipment
SKU: 11982
Category: Ag Equipment + Excavating

"With its generous load capacity, the Explorer XL trailer is designed for hauling larger payloads, whether its bails on the farm or gear in the woods. Features a 25 cu. ft. (55 cu. ft. with cover) polyethylene body, knobby flotation tires,high–speed tapered roller bearings, 2in. ball coupler, tipper latch for dumping and a 1¬in. black powder–coated steel frame. Outside dimensions: 85in.L x 46in.W x 18¬in.H. In olive drab. Truck ship. Model #XL42500 lb. load capacity4 &; 18in. tires"
Manufacturer: Northern Tool and Equipment
SKU: 125714
Category: Trailers + Trailer Parts

"Cast iron pump features new Enbloc design, 15,000+ hour pump life, high-efficiency stainless steel reed valves with backstops, deep cast cooling fins, interstage coolers and directional airflow pattern. Industrial-grade piston assembly. Oversized roller main bearings. Provides maximum compressed air cooling at 100% continuous-duty operation. User adjustable to 230 or 460 Volts (instructions included). Fully packaged compressor with low oil level switch, after cooler and automatic tankdrain. Extended 2-year warranty when you use start-up kit Item# 1592146 (sold separately). Truck ship. U.S.A. 5 HPFully packaged 80-gallon vertical tank17 CFM @ 175 PSI maximum230 or 460 Volts3 phase2 stageMaintenance kit: 1592151Truck shipU.S.A.Model TS51N5FP"
Manufacturer: Ingersoll Rand
SKU: 1592132C
Category: Air Compressors

"8in. blade on this shear/brake allows cutting or bending up to 7 7/8in. long. Thickness capacities: aluminum or circuit board to 1.5mm; copper, tinplate sheet metalor brass to 1mm. Base dimensions 9in. x 5in."
Manufacturer: Northern Industrial Tools
SKU: 143361
Category: Metal Fabrication

Magnum 500 Wheel Paint Kit - Includedin this kit are 3 cans of Satin Black Wheel Paint (10085Z), 2 cans of Argent Silver Wheel Paint (10001Z), and 15" Magnum 500 Wheel Stencil Kit (10193) which can also be trimmed to fit 14" wheels. Enough to do a set of 5 wheels.
SKU: 10505 Z
Category: Specialty Coatings Wheel & Suspension Coatings Wheel

One-piece construction eliminates stress build-up. Double ball bearings and seal ring keep lubrication in and dirt out. Corrosion-resistant grey epoxy finish. 2 5/8in. to 3in. x 3in. to 3 5/8in. bolt hole spacing. 3/4in. king pin. Top plate size 4in. x 4 1/2in. Caster has a roller bearing. U.S.A. Wheel Size: 8in. x 2in. Mount Height: 9 1/2in. Capacity: 1200 Lbs. Bolt Pattern: 2 5/8in. to 3in. x 3in. to 3 5/8in. Top Plate: 4in. x 4 1/2in. Wheel Type: SwivelSemi-Steel with Roller Bearings
Manufacturer: Fairbanks
SKU: 189307
Category: Casters

"Unique system stores tools securely in a trucks right or left wheel well or behind a vans third passenger seat. Stainless steel door hinge at the bottom of the universal door locks and opens from the top down to a stop at 90­. Antitheft keyed cam locking system helps keep contents secure. Fits pickups with bedliners, tonneau covers and caps. 6 ft. bed model with 4 drawers.Designed fit under tonneau covers. U.S.A. Signature seriesFits 6ft. bed4 drawer19in. deepAluminum diamond-plate exterior"
Manufacturer: NI Truck Boxes
SKU: 3491140
Category: Automotive

"Sleek unisex styling, impact protection, and affordability. Lightweight design – less than 1 oz. Contoured, flexible temples for comfortable fit. 99.9% UV protection. Meets ANSIZ87.1. U.S.A. Clear templeIndoor/outdoor lens"
Manufacturer: AO Safety
SKU: 174689
Category: Safety

3/8in. drive chrome vanadium 3/4in. SAE socket.
Manufacturer: Northern Industrial Tools
SKU: 558110
Category: Hand Tools

"Galvanized steel shed features a high gable roof for extra storage and headroom — nearly 7 feet. Mid–wall brace and double–braced sliding doors provide extra strength. 55 1/2 in.W x 60 in.H door opening. Baked–onpolyester enamel paint provides a durable finish. All parts are numbered, pre–cut and pre–drilled for simple, do–it–yourself assembly. 12–year limited warranty. U.S.A. Truck ship. Factory shipped. Style: 10 ft. x 14 ft. OakbrookInterior dimensions: 118.25 in.W x 157.5 in.D x 80.13 in.H"
Manufacturer: Arrow Storage Buildings
SKU: 183452
Category: Tarps + Covers

Securely attaches to an ATV rack tosafely transport firearms or remove from the bracket for a convenient carry case. Adjustable bracket lets you position the scabbard at several angles. Lightning Lid flips back for fast access. Lifetime limited warranty. U.S.A.
Manufacturer: IPI
SKU: 46614
Category: Sporting Goods + Toys

"Model GX160T1QX25.5 HPHorizontal shaft; dimensions: 3/4in. x 2-7/16in.shaft, end tapped 5/16in.-24, 3/16in. keywayApproximate mounting base dimensions: 6.38 in. x 3.15 to 3.35in.PTO height: 4.17in. with 3-5/8in. bolt circleOverall engine dimensions: 12.3in.D x 14.3in.W x 13.2in.HLow oil alertRecoil startCounterclockwise shaft rotation63 qt. oil capacity8.7:1 compression ratio3600 RPMMax torque: 7.9ft. lbs. at 2900 RPMSingle cylinder4 stroke overhead valve (OHV)Air cooled.97 gallon fuel capacity2 year limited warranty"
Manufacturer: Honda Engines
SKU: 6059
Category: Engines

Muscle Gloss 1050square foot system Light Gray
SKU: 43587ZP 03
Category: Tools & Equipment Shop Equipment Clean Up & Maintenance

Hydraulic jack has over 9in. of lift and tilts wheel assembly 7in. to prevent wheel seat damage. Features swivel casters and a 6ft. support chain to hold load in place. TruckShip.
Manufacturer: OTC
SKU: 153772
Category: Automotive

The correct color and quality engine paint is the foundation of a well detailed engine compartment. Quick drying acrylic enamel, high 80-90% gloss finish is heat resistant to 300 degrees F. Colors shown are approximate. 12 oz. net wt. Enough to cover 6 square feet.Buy 2 or more and SAVE!
SKU: 10035 Z
Category: Specialty Coatings Underhood Coatings Engine Paints

Armature operates in oil system so impact is cushioned and noise is reduced. Seal wear is eliminated for longer valve life. Moisture and dirt-resistant molded coils. Complete with bolt kit and electrical junction box. Spool Style: 3-Position Spring Center Closed Size: D05 GPM: 31 12V DC
Manufacturer: Northern Tool and Equipment
SKU: 202502
Category: Hydraulics

Select flux cored steel wire to weld without using gas as a shielding agenton straight polarity MIG welders. Choose mild steel wire for auto body repair and similar types of welding applications. U.S.A. Spool Size 2 lbs.
Manufacturer: Northern Tool and Equipment
SKU: 164897
Category: Welding

Flakes may be added to any of our SHIMRIN Universal Bases,Kandys, Clears or Kustom Bases. Built from ultra thin polyester, our flakes are the lightest and easiest to use. This finish is usually applied over BC-25 (8513ZP 001 QT) Shimrin Black Base. Mini Flakes come on fast with greatly reduced surface roughness. These flakes have the brilliance of a much larger flake, combining the ultimate in a flake look and ease of use.
SKU: 8543 002 6OZ
Category: Auto Body House of Kolor Specialty Products

"Fixed center shelf for maximum rigidity. Features two die cast, cam locking handles for great security. One year limited warranty. Truck Ship. U.S.A. 36in. x 25in.x 72in."
Manufacturer: Northern Tool and Equipment
SKU: 1521660
Category: Storage

Wet/Dry Abrasive Sheets - These autobody shop grade sheets feature silicone carbide abrasivesfor long lasting leveling action. Anti-Slip waterproof paper can be folded/cut to any size. Grit is electrostatically applied to assure uniformity.
SKU: 31353
Category: Auto Body Sandpaper Sandpaper

"1–3/4 HP, 11 Amp, 24,000 RPM motorTactile Soft–Grip D–HandleExclusive Linear Height Adjustment systemExclusiveabove–the–table depth adjustment for table routing applicationsModel 5619–29U.S.A."
Manufacturer: Milwaukee
SKU: M0160
Category: Power Tools

"Milwaukees Band Saws are the choice of professionals. With high torque and powerful motor this band saw will maintain a steady, optimum blade speed. The excellent balance, high visibility, and quick blade change system make this band saw easy to work with. Using an all ball and roller bearing construction, and worm gear and chain drive mechanism, this tool is built to last. A self-lubricating system is used for maximum wear resistance and long life. No oiling is needed. Cuts up to 3 1/2in. dia. round stock; or up to 3 1/2in. x 4 1/2in. rectangular stockGrease-lubricated gear driveOperates at 200 OR 250 feet per minuteDraws6 Amps at 120 VoltsYou get speed and accurate cutting power in a 20in. long portable tool!Includes steel case and bladeModel 6232U.S.A."
Manufacturer: Milwaukee
SKU: 15320
Category: Power Tools

"You dont have to sacrifice the convenience of running both 120 and 240 Volts — the solution is the Yamaha EF12000DE generator. Its dual voltage capability provides the versatility of 120 and 240Volt operation, delivering an unbeatable combination o"
Manufacturer: Yamaha
SKU: 167707
Category: Generators

"Heavy duty 6 pt. chrome moly sockets. All for usewith 1/2in. impact guns. Set includes sizes 29, 30, 32, 34, 35, 36 and 38mm sockets. Also comes with blow molded storage case."
Manufacturer: Northern Tool and Equipment
SKU: 90931
Category: Hand Tools

Keep the technology you use the most right at your fingertips.Use the metal clip for attaching to your belt or sun visor.
Manufacturer: Mossy Oak
SKU: 178631
Category: Storage

"Auxiliary fuel tank with toolbox built in! Diamond treadplate aluminum. Auxiliary tank has fittings so it can connect to your factory lines. (Dieselinstall kits are available). Tank comes with suction tube, manual sight gauge, baffles, return and"
Manufacturer: Northern Industrial Tools
SKU: 3490104
Category: Fuel Transfer + Lubrication

"Razor thin .045 (3/64in.) profile makes this the fastest cutting choice for metal, stainless and alloys. Unmatched wheel life for any product in its class. Fully reinforced. U.S.A. Diameter: 5in. Thickness: .045in. Arbor: 7/8in.Type: 27"
Manufacturer: Flexovit
SKU: 35539
Category: Abrasives

"The ultimate replacement motor for an electric winch High temperature components with ball bearings eliminate motor wear problems Fits Ramsey, Braden, Cam, Hickey, DesertDynamics, Tulsa and Pierce winches Replaces the following Prestolite MBJ models: 4201, 4302, 4204, 4207, 4209, 4402, 4403, 4405, 4407, 4409, 4410, 4411, 4412, 4415 and 4416"
Manufacturer: Northern Tool and Equipment
SKU: 3309074
Category: Winches

"Convenient, dependable compact pressure washer mounts to a wall in your garage, barn or workshop. Quality construction with a 5 HP Leeson motor and CAT belt drive pump, as well as 50ft. of Goodyear non-marking hose. Quick couple injector allows low pressure chemical spray; disconnects for maximum pressure. Includes safety relief valve and 80 mesh filter bowl. 22.5in. L x 24.5in. W x 18in. H. Truck Ship. U.S.A. Pressure (PSI): 2000Flow (GPM): 3.5Motor: Leeson 5 HPPower: 208-230 Volt, draws 30 AmpsPump: Cat5CPDrive: BeltGun: Industrial rear entry 4000 PSINozzle Type: Quick connect 0°,15°,25°,40° and chemical nozzleHose: 3/8in. x 50ft. 3/8in. quick couplers, non-marking rubberCart: StationaryExtras: Adjustable pressure, Chemical injector, Thermalprotector, Autostart"
Manufacturer: NorthStar
SKU: 157559
Category: Pressure Washers

Comfortable seat cover protects new seats and makes old seats look like new. Fits any golf car seat in minutes with elastic hems and strap system. Cushioned polyester fleecefeels warm in winter and cool in summer. Machine washable.
Manufacturer: Classic
SKU: 450511
Category: Tarps + Covers

This high quality tool manufactured by Martin Tools (originally manufactured by Fairmount) are hand-ground and polished to the perfect shape for bodywork and balanced for ease of use. For prying behind header panels and hinge anchors in doors. Weight 1 1/2lbs. Length: 10 1/2", Face: 2" x 7".
SKU: 31038
Category: Auto Body Body & Fender Files / Spoons

This kit contains 2 FrontFender Wheel Well Stripes (w/ "Grabber" cutout), 2 Door Stripes, 2 Rear Quarter Panel Wheel Well Stripes, squeegee and instructions. Decal color is black.
SKU: 11045 001
Category: Styling, Care & Custom Phoenix Graphix Ford

"Let nutrients into your lawn with our mid-sized Spiker Aerator. Spike aerators use a series of rotating star-shaped tines that slice into the soil to allow seed, fertilizer, water, air, light and nutrients to reach the grass roots. Best for black dirt and loamy soils. Frame: steel weight traySpike disks: 12 - 9in. dia.disksTransport wheels: 7in.x 1.5in. semi-pneumatic46in. Wide overallModel 45-0346U.S.A."
Manufacturer: Agri-Fab
SKU: 250246
Category: Grounds Maintenance

"Brass movement with C shaped Boudon tube up to 600 PSI. Helical over 600 PSI. 1/4in. NPT male connection. For use with air, gas, oil or water. Black enameled aluminum pointer, white aluminum dial and temperature compensating polycarbonate window. Glycerin filled to dampen pulse and vibration. Accuracy: ASME/ANSI B40.1 Grade A (2-1-2%). Range PSI: 0-15"
Manufacturer: Northern Tool and Equipment
SKU: 53733
Category: Gauges

Electric Tachometer - Operates on 4, 6, or 8cylinder engines with standard, electronic, and most high performance racing ignitions with 12 volt power.
SKU: 75007
Category: Performance & Tune-Up AutoMeter Phantom

Holds lots of great gear! No brackets required. Mounts underneath the bed of largertrucks or to the side of any pickup bed. 12-gauge steel door has a stainless steel paddle-handle lock and a heavy duty door chain. Built-in rain gutter surrounds door to keep the elements out. Corrosion-resistant finish inside and out. Truck Ship. U.S.A. Inside Measurements: 48in.L x 18in.W x 18in.H
Manufacturer: Contico
SKU: 444292
Category: Automotive

"Powerful router is quiet (81dB) and smooth, so your hands wont go numb using it. Features variable speed control up to 24,000 RPM. Sub-base accepts industry standard template guides. Soft start offers smooth start–ups. 11 Amp motorVariable speed 8000-24,000 RPMElectronic speed control maintains speed under loadSoft startRugged aluminum motor housing with small 3 1/4in. diameterSub-base accepts standard template guidesDurable, stable flat top for easy bit changesIndustrial cam lock for fast, easy depth adjustmentFront knob can be placed in two locations for left or right handed operatorsAll ball bearing constructionLarge calibrated depth control ring for easy depth adjustmentAccepts 1/2in. and 1/4in. shank bitsIncludes 1/4in. collet, 1/2in.collet and 2 wrenchesModel RD1101"
Manufacturer: Makita
SKU: 1591978
Category: Power Tools

"Replace worn-out corrugated bins permanently with these tough, durable, high density plastic bins. Quantum Shelf Bins are the industry standard forquality. These durable polyethylene bins feature a molded in label holder, built-in rear hanglock which allows bins to tilt out for complete access. A wide hopper front allows complete access to contents. Edges are reinforced for added strength. They are designed for 12in., 18in. and 24in. deep shelf units, racks or standard shelves. Bins are waterproof, impervious to most chemicals and unaffected by grease or oil. Sold in cartons only. U.S.A. 17 7/8in. x 8 3/8in. x 4in. Black"
Manufacturer: Quantum
SKU: 278507BK
Category: Storage

"Powered by a reliable Perkins diesel engine, known worldwide for its durability, performance and value. This completepackage includes radiator, muffler with rain cap, engine block heater, battery rack and cables, control panel with hour meter, volt meter"
Manufacturer: Stateline Power
SKU: 162321
Category: Generators

"7in. brakes fit on 2000-lb.capacity axles, 10in. brakes fit 3500-lb. capacity axles. 12in. brakes fit on 6,000 and 7,000 capacity axles. You get one set, one for each side of the axle. Order drums and hubs separately. Size: 7in. Description: Electric Brake"
Manufacturer: Reliable
SKU: 12497
Category: Trailers + Trailer Parts

A collection of the finest quality finishes available in the custom coatings industry today. This SHIMRIN basecoat is available in twelve traditional pastel colors that will complete a perfect restoration or enhance a new custom project.For best results use these pastel bases over BC-26 (8513ZP 002 QT)Shimrin White Base.
SKU: 8515ZP 001 QT
Category: Auto Body Painting House of Kolor Paints

"A non–metallic blend used to permanently color the surface of freshly placed concrete usingthe shake–on or broadcast method. Formulated to produce uniform, consistent color. Designed to be used alone or with BonWay True Color Release Agent when imprinting concrete with texture mats. Available in a 5–gallon pail that contains 63 lbs. of material. Coverage requirements vary according to the color selected and intended use. Hardener should be applied at a rate of 60 lbs. per 100 sq. ft. Lighter or pastel colors may require as a much as 100 lbs. per 100 sq. ft. U.S.A. Factory shipped. Dark Gray"
Manufacturer: BonWay
SKU: 999830
Category: Construction

"3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 and 7/8in.."
Manufacturer: Northern Tool and Equipment
SKU: 15482
Category: Hand Tools

E-Z Rest Door Hanger - Remove/install doors for bodyworkor hinge repair with your trolley jack, the E-Z Rest Door Hanger fits most trolley jacks with removable saddles hole dimension 1.17" to 1.19" (30mm). Also great for bumpers. Imported. 90-day manufacturer's warranty. (floor jack not included)
SKU: 43496
Category: Tools & Equipment Shop Tools Body & Fender Tools

"This burly hammer has a powerful 11 Amp motor and spline drive system to power through the toughest jobs. Switches from rotary hammer to hammer–onlymode. Air cushion design enables hard–hitting, fast drilling. 11 Amp motor260 RPM2100 blows per minuteRotary Hammering and Hammering–Only modesSpline–type drive system for maximum powerAll ball and needle bearings for long tool lifeLarge comfortable grip swivels 360° for easy handlingAutomatic brush cut–out systemAir cushion design for hard hitting and fast drillingTorque limiter clutch for smoother operationFactory grease packed for reduced maintenanceIncludes straight handle, D–handle, depth gauge, bit grease and plastic tool caseModel HR5000C"
Manufacturer: Makita
SKU: 1591963
Category: Power Tools

"Quick release style with 1/4-turn fasteners allows removal of windshield in less than 10 seconds for servicing or hauling on a trailer or in a truck. Made of tough,shatter-resistant polycarbonate with black edge trim all around. U.S.A. 34in.W x 21in.HHeadlight cutout is 9in.W x 6in.HIncludes mounting hardware and instructionsDoes not fit Honda Rincon, TRX400, 450S, ES4X4, 300 Rubicon; Kawasaki Prairie 650"
Manufacturer: Northern Tool and Equipment
SKU: 48001
Category: Sporting Goods + Toys

For 120-lb. full open head drums. Comes with drum cover and 5in. clear vinyl dischargehose with curved nozzle.
Manufacturer: Zee Line
SKU: 109053
Category: Fuel Transfer + Lubrication

"Electronic goose repeller discourages Canada geese for up to 7 acres. The goose repeller uses natural sounds to signal danger,causing geese to leave instinctively. Includes 110V system with 4 speakers, each with 100 feet of cable. Durable and weatherproof for use season after season. U.S.A."
Manufacturer: Bird-X
SKU: 168370
Category: Grounds Maintenance

For best results with our Windshield Repair Kit #40008 use this diamond coated burr to make a precise hole in the damaged glass and make a stronger resin bond.Shank diameter is 1/8", use at 1500 rpm or less.
SKU: 52030
Category: Styling, Care & Custom Plastic & Glass Repair Windshield repair

"High strength steel housing is designed to weld onto frame members set at 50° angles. Heavyduty coupler has a 25,000-lb. mobile home rating. 10,000-lb. GVW capacity. Patented wedge latch — The only replaceable ball clamp assembly in its classSAE class IVPrimed finish"
Manufacturer: Fulton
SKU: 128140
Category: Towing

"Industrial poly concrete sprayer sprays up to 35% solids! Viton seals and gaskets resistchemicals to extend the life of your sprayer. Includes Chapin holster to hold wand, pump and nozzles. U.S.A. Female brass fan nozzle attaches directly to shutoff or extension (.5 GPM and 1 GPM included).Shutoff has lock-on featureWide-mouth top for easy filling and cleaning12in. poly pump24in. curved brass extensionFlexible 36in. heavy-duty hoseHolster to hold wand, pump and nozzlesU.S.A.Model 2218"
Manufacturer: Chapin
SKU: 261194
Category: Grounds Maintenance

"Holds or turns flywheel while you adjust timing. Toolhooks into flywheel teeth to rotate crankshaft. Spring tension for solid hold. Great for installing rings, transmissions, etc. U.S.A."
Manufacturer: T & E Tools
SKU: 154076
Category: Automotive

All arespecially formulated for top performance. All NorthStar© chemicals are biodegradable. Description: Degreaser/Cleaner Size: 5 Gallon Feature: Corrosion Inhibitor Makes Up To: 640 Gallons
Manufacturer: Northern Tool and Equipment
SKU: 22208
Category: Pressure Washers

"Toughest! Rugged tarp fabric is highly resistant to cold weather, fraying and tearing, thanks to a tough mesh weave of 420 denier polyester cords. Waterproof coating of polyvinyl chloride resists the suns ultraviolet rays. Heat-welded corners. Non-rust brass grommets every 2ft. along all 4 edgesand at corners. Excellent cover-ups for equipment, truck and wagon loads, hay stacks and many other heavy duty purposes. Total thickness 16 mil. Charcoal gray. Finish Size: 12ft. x 52ft."
Manufacturer: Northern Industrial Tools
SKU: 118514
Category: Tarps + Covers

Thesespecially designed tools have an etched Kurt Busch signature and the #97. A special trading card has ben added with all the statistics on IRWIN racing.
Manufacturer: Irwin Vise Grip
SKU: 962296
Category: Hand Tools

No special tools are required to apply patches. Bothstyles easily install from the inside and universal style combos can also be patched from the exterior. U.S.A.
Manufacturer: XtraSeal
SKU: 134732
Category: Automotive

"Fills instead of spills!™ PETRO PUMPs nozzle goes right into the tank of whatever youre filling, and the 5–gallon can stays on the ground. 4–ft. hose with nozzle plus pump, pour spout and seal–tightcap. Two handles for easier use."
Manufacturer: Northern Tool and Equipment
SKU: 16947
Category: Fuel Transfer + Lubrication