SILICONE GUN MITT (GPCSILICONEGUNMITT) @ Outdoor Gear online store

Heavy weave ballistic nylon. Thick dense padding,black lining. Wrap-around web handles. Wide oval rubber protector muzzle end with exterior muzzle protector. Full length YKK nylon coil zipper.
SKU: 48280
Category: Shooting Gun Cases Soft Long Gun Cases

Preferred by many experienced boaters. Available in heavyno-mar plastisol protectant coating. Color: Black.
SKU: 60654
Category: Marine Anchors, Paddles, Poles, & Accessories

A. Outside Corner (Female) -Two 1/2'' welded tabs. Use w/male outside corner. Each leg is 10''Lx5''H. Part # 26521 B. Outside Corner (Male)-One 1/2" welded tab. Use w/female outside corner to connect docks end to end. Joint requires 3/4" bolt set (N) or connector pin (O). Leg is 10"Lx5"H. Part # 26522 C. Outside Corner End-Use at ends of fingers & docks. Ideal for swim floats & ski jump corners. Leg is 10"Lx5"H. Part #26523. D. Inside Corner-Use with outside corners. Leg with elongated holes. 8-1/4"Lx5"H. Part # 26524. E. Inside Corner/Pipe Holder 3" (Part # 26525) Inside Corner/Pipe Holder 2" (Part # 26526)-Use with outside corners. Internal pipe holder to be used with either 2" pipe (Part # 26525) or 1-1/2" pipe (Part # 26526). Welded gusset. 8-1/4"Lx5"H. Requires carriage bolt set(M) for attaching. F. Angle-Use for all cross supports. 2-1/2"Lx5"H. Part # 26527. G. Female T Connector-One welded 1/2" tab. Bolts to side of dock to attach fingers & ramps. Measures 5"Lx5"H. Part # 26528. H. Male T Connector-One welded 1/2" tab. Use with female T connector to attach fingers & ramps. Measures 5"Lx5"H. 3/4" bolt set(N) required for joint. Part # 26532. I. Washer Plate-Use 2 washer plates with each angle. 1-1/2"Lx5"H. Part # 24284. J. Chain Retainer-Bolts to side of dock. Use weights & chains to hold dock in place. Accommodates 1/4", 3/8" & 1/2" chain. 5"Lx5"H. Part # 26529. K. Pipe Holder/Outside 3"-bolts to outside of dock. Carriage bolt set (M) required for attaching. Use 2" pipe to hold dock in place. Part # 24280. L. Lag Bolt Set-bolt & flat washer hot dipped galvanized used to attach flotation drums to dock system. Part # 24288. M. Carriage Bolt Set-used to attach A thru K component parts. 3/8"x2-1/2" bolt, flat washer & nut. Hot dipped galvanized. Part # 26530. N. 3/4" Hex Head Bolt Set-for quick disconnect. Used to connect male & female connectors. Galvanized 3/4"x3-1/2". Part # 24278. O. Connector Pin Set-for quick disconnect. Used to connect male & female connectors. Galvanized 3/4" connector pin & hitch clip pin. Part # 26531. ALSO AVAILABLE - NOT PICTURED - Part # 26413. Back Up Plates. All Hardware is designed to use with 1-1/2" thick lumber, minimum width 6" and is mounted with 3/8" carriage bolts(M). All male & female dock to dock connectors are made with either 3/4" bolts with lock nut(N) or 3/4" connecting pins(O). Tie Downs' Wood Dock Plan Kit will show the basics on construction for this lightweight and long-lasting floating dock system.
SKU: 57326
Category: Marine Buoys, Fenders & Dock Boat Molding

If shooters are not comfortable in their clothing at the range, then more than likely, scores suffer. Binding sleeves, tight zippers, excessive recoil, weather, etc., all can distract. That’s why Browning takes the Shooting clothing line very seriously. They develop each garment, while shooting at the range, for the shooter. - Twill full-length shooting patch - Mesh body forventilation - Two-way front zipper - Four large front shell pockets - Bar tacks at all stress points - Side tab adjustments - Large back pocket for empties or other gear - Built in REACTAR pad system - Split shoulder for ease of movement - 60% cotton/40% polyester twill - 100% polyester mesh
SKU: 83070
Category: Clothing Blaze Orange Clothing

Great concealment holster, flattens profile against side. Velcro adjustable retention strap & thumbbreak. Reversible for ambidextrous use. Patented tri-laminate protects firearm. Reversible belt loop fits belts up to 2''. HOLSTER SIZE CHART - CLICK BELOW "VIEW HUNTING CATALOG PAGE".
SKU: 48299
Category: Shooting Holsters, Leather & Accessories Holsters Gunmate

The A.R. 3.25 Lock-Back is designed for heavy use. The 3.25" clip-point steel blade is forged from high grade surgical stainless steel. The sturdy frame is cut from aircraft-grade aluminum, over molded with SoftGrip textured rubber inserts for a non-slip grip. As a result, the user has a quality full size folding knife which feels good in the hand and is strong enough for any task. Technical Specs: Overall Length: 7.75'' Length Closed: 4.5'' Length of Blade: 3.25'' Weight: 4.4 oz. Lock Mechanism: Lock back Blade Style: Fine edge Blade Material: Surgical stainless steel Handle Material: Aircraft grade aluminum & non-sliptextured grip. Sheath: Ballistic nylon
SKU: 88509
Category: Knives & Edged Tools Knives Gerber

Two cable assemblies required for twin systems. NOTE: REPLACEMENT CABLE ONLY. (Previously SS127 kit).
SKU: 62129
Category: Marine Controls & Steering

Mushrooms quickly in acontrolled manner. 95% weight retention. Virtually hand-made, critical tolerances are held to exacting standards. Tapered sidewalls. A-frame cross member. Exclusive proprietary bonding process holds jacket and core together during tremendous forces of mushrooming.
SKU: 49313
Category: Shooting Reloading Bullets Swift

Convert guide open sight to a receiver peep sight. Replaces sight blade. Out diameter of aperture is 3/8".
SKU: 50054
Category: Optics & Sights Sights & Accessories Williams

A. Outside Corner (Female) -Two 1/2'' welded tabs. Use w/male outside corner. Each leg is 10''Lx5''H. Part # 26521 B. Outside Corner (Male)-One 1/2" welded tab. Use w/female outside corner to connect docks end to end. Joint requires 3/4" bolt set (N) or connector pin (O). Leg is 10"Lx5"H. Part # 26522 C. Outside Corner End-Use at ends of fingers & docks. Ideal for swim floats & ski jump corners. Leg is 10"Lx5"H. Part #26523. D. Inside Corner-Use with outside corners. Leg with elongated holes. 8-1/4"Lx5"H. Part # 26524. E. Inside Corner/Pipe Holder 3" (Part # 26525) Inside Corner/Pipe Holder 2" (Part # 26526)-Use with outside corners. Internal pipe holder to be used with either 2" pipe (Part # 26525) or 1-1/2" pipe (Part # 26526). Welded gusset. 8-1/4"Lx5"H. Requires carriage bolt set(M) for attaching. F. Angle-Use for all cross supports. 2-1/2"Lx5"H. Part # 26527. G. Female T Connector-One welded 1/2" tab. Bolts to side of dock to attach fingers & ramps. Measures 5"Lx5"H. Part # 26528. H. Male T Connector-One welded 1/2" tab. Use with female T connector to attach fingers & ramps. Measures 5"Lx5"H. 3/4" bolt set(N) required for joint. Part # 26532. I. Washer Plate-Use 2 washer plates with each angle. 1-1/2"Lx5"H. Part # 24284. J. Chain Retainer-Bolts to side of dock. Use weights & chains to hold dock in place. Accommodates 1/4", 3/8" & 1/2" chain. 5"Lx5"H. Part # 26529. K. Pipe Holder/Outside 3"-bolts to outside of dock.Carriage bolt set (M) required for attaching. Use 2" pipe to hold dock in place. Part # 24280. L. Lag Bolt Set-bolt & flat washer hot dipped galvanized used to attach flotation drums to dock system. Part # 24288. M. Carriage Bolt Set-used to attach A thru K component parts. 3/8"x2-1/2" bolt, flat washer & nut. Hot dipped galvanized. Part # 26530. N. 3/4" Hex Head Bolt Set-for quick disconnect. Used to connect male & female connectors. Galvanized 3/4"x3-1/2". Part # 24278. O. Connector Pin Set-for quick disconnect. Used to connect male & female connectors. Galvanized 3/4" connector pin & hitch clip pin. Part # 26531. ALSO AVAILABLE - NOT PICTURED - Part # 26413. Back Up Plates. All Hardware is designed to use with 1-1/2" thick lumber, minimum width 6" and is mounted with 3/8" carriage bolts(M). All male & female dock to dock connectors are made with either 3/4" bolts with lock nut(N) or 3/4" connecting pins(O). Tie Downs' Wood Dock Plan Kit will show the basics on construction for this lightweight and long-lasting floating dock system.
SKU: 57326
Category: Marine Buoys, Fenders & Dock Boat Molding

The bullet that delivers a TRIPLE IMPACT – One when it first strikes the game, another as the bullet begins opening, and a third devastating impact when the specially engineered cavity fully expands to deliver extra shock with maximum transferred energy. - Greater velocity - Lower pressure - Less fouling - Better accuracy - All copper construction - Nofragmentation - Penetrates 28% deeper than lead core bullets - More one-shot kills - High weight retention - Four razor sharp cutting edges for deeper penetration
SKU: 99274
Category: Shooting Reloading Bullets Speer

Poly, glass-impregnated construction. Marine-grade rubber squeegee.Black blades.
SKU: 57859
Category: Marine Boat Accessories Windshield Wipers, Wiper Motors & Accessories

Screw-on funnel replacesthe cap on a 1 lb. can. Attached snap-fit cap closes the funnel hole.
SKU: 47866
Category: Shooting Black Powder Guns & Accessories Flasks And Funnels

Rifle Bullets 7MM (.284) 100 Grain Hollow Point Packed Per 100
SKU: 82853
Category: Shooting Reloading Bullets Hornady

Rifle Bullets 338 Caliber (.338) 200 Grain Spire Point Packed Per 100 No matter what kind of game you're hunting, you need the right bullet. And, for any hunter worldwide, the right bullet is Hornady InterLock. InterLock is designed for hunters who understand that a bullet must be evaluated two ways: first, on how consistently it can be delivered to an exact point of aim; and second, on what happens once it reaches that point. It's precisely that combination of accuracy and performance which makes InterLock the reliable choice for any hunting situation. The InterLock bullet is designed to be the most dependable bullet you can take with you into the field. The InterLock ring assures perfect mushroom expansion without jacket/core separation. As a result, the bullet retains more mass, energy and momentum afterimpact. This stopping power has earned InterLock its deadly reputation. Hunters worldwide use InterLock bullets to take everything from antelope to zebra and from whitetails to wildebeest. It's such a proven performer, Hornady selected it to load into our enhanced performance Light Magnum and Heavy Magnum ammunition. How the Interlock Bullet works: It all happens in less than 1 /100th of a second. Yet it takes decades of experience in the design and manufacture of bullets to make it happen the same shot after shot after shot. InterLock consistently performs under more shooting conditions than any other bullet. 1. On impact, the soft lead point is immediately pushed back and begins to expand in diameter. 2. The copper jacket, inner grooved at the bullet's point, folds back behind the leading edge of the expanding lead core. 3. The classic mushroom is achieved by the jacket and core expanding at the same rate. Expansion is controlled by increased resistance from the growing thickness of the copper jacket. 4. The InterLock ring, imbedded in the lead core, assures that the jacket and core will not separate as the bullet reaches its full expansion.
SKU: 82838
Category: Shooting Reloading Bullets Hornady

Rubber grip with finger grooves and palm swells. 2-piece, free-floating, rubber OverMoldedaluminum forend tube.
SKU: 50350
Category: Shooting Gun Accessories Stocks & Accessories

Permanent lock downhardware included, quick release option, packaged for protection, durable plexiglass. Ship UPS. Color - Smoke
SKU: 58718
Category: Marine Boat Accessories Windshield Wipers, Wiper Motors & Accessories

Chrome-plated brass construction with rubber gaskets and threaded cap to give waterproof method of runningelectric wires and antenna cables through deck. Carded.
SKU: 57295
Category: Marine Audio, Video, Electronics & Accessories Antennas & Accessories

Miniature version of Protégé 450 FX. Non-slip black rubberized, thermoplastic handle. Partially serrated blade. Closed Length: 3".
SKU: 54321
Category: Knives & Edged Tools Knives Buck

Provides safe, secure means for shooter to carry Glock with mounted light. Constructed of special glass filledpolymer for additional rigidity. Open back allows pistol to be used with any current pistol mounted lights. Safety strap is positioned to be easily deactivated during draw, providing instant access. Tapered cone muzzle plug aids in reholstering pistol.
SKU: 73117
Category: Shooting Holsters, Leather & Accessories Holsters Fobus

Large digital depth/surface temp. readout, lighted directional arrow, SmartFoot power steering and breakaway mount. Built-in transducer allows motor to automatically steer boat on following depth contours. Traces out underwater points, breaklines, humps finding subtle fish hold structure. In the manual mode the SX features a rocker-style foot pedal that operates like a conventional mechanical trolling motor to provide the feel needed to steer boat without having to look at the motor. 3000 SERIES: Five built-in transducers relay information to a 32-bit microprocessor that can automatically track depth contours, the shoreline or submerged creek or river channels all at the touch of a finger. Network Fishing System compatible with any Pinpoint Sonar Imaging Display. SONAR IMAGING DISPLAYS: 18 pixels per second chart speed. 3 screen configurations and designed to plug into any Pinpoint motor. Works directly with the motor and uses the 240 kHz transducer builtright into the motor. Nothing to strap on and no power connections to make. All Pinpoint Sonar Displays offer Super-twist LCD screens. Easy-to-use on screen menus, Screen Re-Draw, History Review, 32-bit microprocessor and 450 RMS/3600 watts peak-to-peak power. Never interferes on Pinpoint Sonar Displays when running the Pinpoint Positioning Motor
SKU: 57486
Category: Marine Trolling Motors And Accessories

One-piece, molded, hinged fastener cover. Propylene inner core w/molded vinyl cover. Installs w/2 #12fasteners via thru-bolting or wood screws. 7-1/2'' centered hole pattern.
SKU: 58671
Category: Marine Hardware Lift Rings Pulls & Handles

The lightweight Mini Auto Clip is the only knife in the world with adjustable tension pocket clips. This patented device is easily operated with a quick turn thumb wheel. The Mini Auto Clip contains a thumb slot for easy, one-handed opening. Lightweight Zytel handlesfeature a cleverly woven texture for a secure, no-slip grip. The Mini AutoClip series is available in black, red, yellow, or green handles SPECIFICATIONS: - Blade: Plain Edge, AUS6 Stainless Steel, RC 56-57 - Blade Length: 2.9" - Overall Length: 6.75" - Weight: 1.5 oz
SKU: 82648
Category: Knives & Edged Tools Knives SOG

Compact, sturdy aluminum body, anodized against corrosion inside and out, with unbreakable Lexan lens. 7 3/8" long, 10 oz., up to 15,000 candlepower. Comes with adjustable focus and spare bulb in end cap. Battery: Nickel-cadmium 3.6 Volt, 1.8 amp hour, sub-C; rechargeable up to 1,000 times. Bulb: 3.7 Volt, 6 watt, xenon gas filled bi-pin; spare bulb in tail cap. Material: Machined aluminum housing anodized against corrosion inside and out; unbreakable polycarbonate lens. Color: Black Weight: (with battery) 10 ounces Length: 7.4 inches Run Time: 1 hour of continuous use between chargers. Candlepower: Up to 15,000 -DC charger for vehicle use -10-hour snap-in regular chargers
SKU: 82658
Category: Flashlights & Lighting Flashlights & Accessories Streamlight

For use with 450 Sizer-Lubricator. Sizes cast bullets to exact sizewith a swaging action. Size must correspond to the groove diameter of your rifle or pistol.
SKU: 48929
Category: Shooting Reloading Loading Presses & Accessories

Inside waistband, thin profile design for concealability. Heavy duty 1-3/4" clip keeps holster securely in place. High ride, open muzzle design. For side or crossdraw use. Double stitched seam in welt area for strength. Adjustable thumbbreak fits various firearms. FIT GROUPS-CLICK BELOW "VIEW HUNTING CATALOG PAGE" LINK FOR COMPLETE CHARTS.
SKU: 48145
Category: Shooting Holsters, Leather & Accessories Holsters Bianchi

1-piece, multi-function universal quiver system. Soft Loc Rail Gripper, pair of rubber grippers similar to the arrow gripper on the quiver, are mounted to a riser mounting plate that permanently mounts to the bow. Twoaluminum guide rails allow infinite vertical adjustments.
SKU: 56022
Category: Archery Quivers & Accessories

25 rounds per box/10boxes per case. SOLD BY THE CASE ONLY.
SKU: 88928
Category: Archery Bow Cases Allen

Contains 168 of the most commonly used repair and replacement stainless steel fasteners. Idealfor every boater.
SKU: 63047
Category: Marine Hardware Fastener Kits

This quality scope features multi-coated objective and ocular lenses for superior performance. Finger adjustable windage and elevationknobs provide precise click adjustments found in scopes costing much more. It is waterproof, shockproof and nitrogen charged and comes with Sightron’s over the counter Lifetime Warranty. Specifications: -Finish: Satin Black -Field of View @100 Yards: 35.3-9.2ft -Tube Diameter: 1” -Weight: 14.5 oz. -Length: 12.60” -Click Value: ¼ MOA -Eye Relief: 5.0-3.7” -Reticle Type: Plex
SKU: 72909
Category: Optics & Sights Scopes Tasco

- 100% cotton overdyed fabric - Crewneck _________________________________ Men's Apparel Sizing Information: Small: Chest = 37-39",Waist = 38-31", Neck = 14-14.5", Arm = 32-33" Medium: Chest = 40-42", Waist = 32-35", Neck = 15-15.5", Arm = 33-34" Large: Chest = 43-45", Waist = 36-39", Neck = 16-16.5", Arm = 34-35" XLarge: Chest = 46-48", Waist = 40-43", Neck = 17-17.5", Arm = 35-36" XXLarge: Chest = 49-51", Waist = 44-46", Neck = 18-18.5", Arm = 36-37" XXXLarge: Chest = 52-54", Waist = 47-49", Neck = 18-19", Arm = 36-37"
SKU: 98867
Category: Clothing Camouflage Clothing

20 Watt SpotLamp Assembly for use with LiteBox.
SKU: 83008
Category: Flashlights & Lighting Flashlights & Accessories Streamlight

FS box, black non-metallic with two 3/4": K.O.holes. Will accept all 15A 125V, 20A 125V, 30A 125V receptacles & 7420CR weatherproof covers.
SKU: 59992
Category: Marine Electrical Accessories Adapters, Connectors, Plugs & Receptacles

Top grain cowhide. Brown nylon stitching. Brown strap, pad lightly painted & antique background.
SKU: 47926
Category: Shooting Gun Accessories Leather & Nylon Slings

Hard modified-epoxy antifouling paint. For use in severe fouling conditions.
SKU: 62438
Category: Marine Boat Cleaning & Repair Products Bottom Paint/Coatings

Ideal for anchoring in shallow water.Vinyl and polyester yellow/purple anchor bag holds up to 35 lbs. rock or sand. Yellow buoy marks anchor's location. Heavy-duty, floating purple/red/yellow rope with large snap hook.
SKU: 58639
Category: Marine Flotation Personal Watercraft Accessories

All Sightron products are engineered with the highest quality in mind. With features like a one-piece body tube, multi-coated optics, and a unique 720-degree focus system, this scope is sure to be a must have on your next hunting trip into the woods. The Sightron SI39x40WA scope offers a high-qualityscope with affordable pricing. This scope is a 3-9 power hunting scope with finger adjustable windage and elevation turrets. It comes in a black matte finish and multi-coating on the ocular and objective lens. Specifications: -Finish: Dull Matte Black -Field of View @100 Yards: 38 Feet -Tube Diameter: 1” -Weight: 13.4 Oz. -Length: 12.8” -Click Value: ¼” -Eye Relief @3X: 4.5” -Reticle Type: Plex
SKU: 82364
Category: Optics & Sights Scopes Tasco

In-Line ignition. Full black Rynite classic stockwith pistol grip cap. Shoulder sealing universal breech plug. Accepts 150 gr. or 3 Pyrodex pellets. Hot ignition, equipped w/Flame Thrower musket cap nipple. QLA muzzle system. Includes No.11 nipple. Fiber optic sights. Extended range barrel.
SKU: 47454
Category: Shooting Black Powder Guns & Accessories Black Powder Rifles

Bullets for auto pistolsdesigned for reliable feeding and expansion. Box of 100.
SKU: 48848
Category: Shooting Reloading Bullets Hornady

For close-up, delicate jobs. Comes with 5 specially hardened industrial-grade bits ( 3 slot, 2 Phillips), and a storage pouch.
SKU: 50160
Category: Shooting Gun Accessories Gunsmithing Tools & Accessories

2 styles: Open Style or Retention Strap. Unique, ultra-thin 4-layer laminate no thicker than conventional suede holsters. Internal moisture barrier will not transmit perspiration to gun. Suede-like exterior helps anchorholster inside pants/skirt. Smooth nylon lining, easy draw. HOLSTER SIZE GUIDE - CLICK BELOW "VIEW HUNTING CATALOG PAGE". PAGES 838-840.
SKU: 47981
Category: Shooting Holsters, Leather & Accessories Holsters Uncle Mike's

1000D Cordura material, nylon webbing. Heavy-duty, double-stitched construction. Modular & daisy chain attachment points. Two zippered compartments hold food, water, gear & ammo. Padded wicking mesh harness system for extra comfort and stability. 2" removable belt &sternum strap.
SKU: 83572
Category: Camping/Hiking Water Carriers Camelbak

Attaches directly to firearm. Does not require traditional base. Machined from solid stock. Tolerances are markedly tighter. FOR LEUPOLD SPECS & MOUNTING CHARTS-CLICK BELOW "VIEW HUNTING CATALOG PAGE". PAGES 435-442
SKU: 89127
Category: Optics & Sights Scope Mounts, Rings, Bases Leupold

Compatible with Garelick hardware. Provides a solid base of support for a variety of seat hardware. This pedestal mounts Garelick fore and aft seat slides and 360 degree swivel spider combinations. Anodized protective finish helps prevent saltwater corrosion and weathering. Fits Fore and aft slides: 22000, 75080, 75082, 75083. Swivel spiders: 99023, 99036.
SKU: 59059
Category: Marine Boat Seats & Accessories Boat Seat Accessories

For cables installed down same side of boat (port or starboard). Steering tube is provided with grease-fittingand O-ring. All parts provided for simple hook-up. Stainless steel and gold-plated aluminum makes kit corrosion resistant. For use with engine manufacturer's steering arm; not included.
SKU: 62140
Category: Marine Controls & Steering

Works instantly to eliminateodors. With 10% more of the most effective, biodegradable, odor control ingredient available. Breaks down waste and tissue, keeps holding tank clean and freshens your bathroon with a pleasant, floral-mint fragrance. All-weather formulas are effective in both arctic and hot, steamy conditions. Reccommended for use in marine holding tanks, recirculating and portable toilets.
SKU: 74623
Category: Marine Pumps Hoses And Fittings Marine Toilet/Tank Treatments And Supplies Sealand

The foundation upon which Ultramax built in 1986 remains the same. They are dedicated to provide a top QUALITY product manufactured to exacting standards of PERFORMANCE at a fair market VALUE. Hard work, honest business dealings and fast, friendly service have made Ultramax one of the ammunition industry's leading suppliers. For these reasons Ultramax virtually covers America. Rifle Ammunition-Per 20 -223 Remington -52 Grain -Jacketed Hollow Point -Muzzle Velocity: 3000 FPS -Remanufactured Ultramax remanufactured grade ammunition uses recycled cartridge cases. Every returned cartridge must meet once fired quality standards. Then each cartridge is loaded under the same exacting specifications as the Match grade ammunition. 10-Step Quality Assurance Program: 1.Ultramax machine inspects all previously fired cartridge cases for flaws. Case inspection machines are fully automatic and perform several critical functions. All casesare probed for any foreign objects and pressure tested for cracks or dents. Spent primers are remover, flash holes are cleared of any foreign material, primer pockets are probed for flaws, and finally, primer pockets are reamed to insure compatibility with any new commercial primer. 2.Ultramax liquid washes all previously fired cartridge cases after they have been processed through the case inspection machines to insure the cases, primer pockets and flash holes are clean and devoid of any foreign material. All cases are then tumble dried to a high-luster finish. 3.Ultramax roll sizes all previously fired cartridge cases to meet S.A.A.M.I. specifications on new cartridge cases. Roll sizing is the only method available to insure that the previously fired cartridge cases are sized down to the rim of the case. This results in flawless functioning in semiautomatics and perfect chambering in revolvers. 4.Ultramax selects the optimum powder charges for each caliber and bullet type of ammunition after testing hundreds of loads for accuracy, velocity and pressure. 5.Ultramax selects powders for each type of ammunition that fill cartridge cases as close to capacity as possible. This step makes double or over-charges impossible. 6.Ultramax loads all ammunition on fully automatic loading machines which are preset to S.A.A.M.I. specifications for priming depth, powder charge and overall cartridge length. 7.All loading machines are equipped with state of the art electronic safety switches to insure powder charge accuracy to within a half grain of powder. If the powder charge is not within specifications, the switch will automatically shut off the loading machine and will indicate a powder charge problem has occurred. They check all safety switches three times per day for switch failure. 8.Ultramax has their own indoor underground range for testing. They test fire samples prior to starting a production run of ammunition, and every run is tested daily. Any change in powder lot numbers or primer type is tested before
SKU: 82682
Category: Shooting Ammunition Centerfire Rifle Ammunition Ultramax Ammunition

Athletic Fit, Lightweight, Leather, Fabric Boot designed for Law Enforcement Professionals. - Full Grain and Split Leather Upper - 1000 Denier Nylon - Triple Stitched Upper - Steel Shank - One Pull Speed Lacing System - Stitched Outsole - Carbon Rubber, Multi-Tred Traction, Self-Cleaning Outsole - Compression Molded EVA Midsole - Removable Molded Orthotic Innersole - Synthetic Moisture Wicking Lining - Rust Proof Hardware - Weight - 39oz/pair (size 9)
SKU: 98127
Category: Footwear Footwear Original SWAT Original SWAT

Strong yet lightaluminum bases offer a choice of finishes; scratch-proof textured or brushed satin.
SKU: 58895
Category: Marine Boat Seats & Accessories Boat Seat Accessories

Double J-hooks with keeper. Designedfor quick and easy adjustment. Rated strength - 1000 lbs.
SKU: 59572
Category: Automotive/ATV Trailer Accessories Tie Downs

A new level of quality, accuracy & performance in a factory load. PREMIER SAFARI GRADE & PREMIER PARTITION provide theperfect mix of accuracy, weight retention & on-target energy. Safari ammunition incorporates the Swift A-frame dual core bullets which expand reliably at long ranges. Versatile Premier Partition bullets mushroom completely while providing excellent weight retention.
SKU: 72966
Category: Shooting Ammunition Centerfire Rifle Ammunition Remington

Constriction reduced to .655''.Front of tube is knurled for good grip and easy removal. Extend 1'' beyond barrel.
SKU: 50385
Category: Shooting Gun Accessories Choke Tubes & Accessories

Closeout Item - New Reduced cost! Quantities are limited. The Fred Carter Utility 1 is part of Gerber's International line of knives, and the blade features the Fred Carter signature. The blade is AUS-8A stainless steel and has a regular edge. A CNCblack G-10 handle compliments the knife with a cut-out pattern. Specifications: Fred Carter Utility 1 Open Length: 8.62" Closed Length: 5.00" Blade: Regular edge, AUS-8A stainless steel Handle: CNC black G-10 with cutouts
SKU: 88144
Category: Knives & Edged Tools Knives Gerber

Automated case preparation. Unique 3 blade head configuration trims cases a standard cutting tool, inside blade chamfers case and outside blade deburrs it. Attacheseasily to either Trim-Pro case trimmer.
SKU: 49364
Category: Shooting Reloading Case Cutters, Trimmers & Accessories

Processes cases twice as fast as old style tumblers. Allows inspection of the cases without stopping the operation. Cleans and polishes all exterior surfaces simultaneously. Two styles are offered. The Turbo 1200 with a 12 lb. capacity, will clean and polish the equivalent of over 200.38 Specials or 100 .30-06 cartridges. The Turbo 600 cleans half the Model 1200 capacity. Comes with media. Auto-Flo system comes with a drain pan for automatic separation of polishing media bowl.
SKU: 49052
Category: Shooting Reloading Tumblers, Tumbling Media & Accessories

13" fixed height. Quad-Action swivel. Works with #1100002.
SKU: 58972
Category: Marine Boat Seats & Accessories Boat Seat Accessories

BAK-4 prisms. Fully multi coated optics. Heavy duty 100% waterproof/fogproof construction. RainGuardwater repellent lens coating. Large center focus knob. Trim ergonomic shape for easy, all day use. Textured, non-glare, non slip rubber armor absorbs shock. Diopter adjustment for precise, reliable adjustments. Pop up eyecups. Carrying case and neck strap included.
SKU: 73240
Category: Optics & Sights Binoculars & Accessories

Athletic Fit, Lightweight, Leather, FabricBoot designed for Law Enforcement Professionals. - Full Grain and Split Leather Upper - 1000 Denier Nylon - Triple Stitched Upper - Steel Shank - Stitched Outsole - Carbon Rubber, Multi-Tred Traction, Self-Cleaning Outsole - Compression Molded EVA Midsole - Removable Molded Orthotic Innersole - Synthetic Moisture Wicking Lining - Rust Proof Hardware - Weight - 31oz/pair (size 7)
SKU: 98135
Category: Footwear Footwear Original SWAT Original SWAT

Storage box with cover. Box features metal strip with "shanks" that hold Convert-A-Balls in place. Springloaded onto "shanks" for convenient storage and carrying. Top is rugged plastic. Storage box can be mounted anywhere and in any position.
SKU: 59410
Category: Automotive/ATV Trailer Accessories Balls Couplers/Hitches Chains And Accessories

Will not rust, corrode, or mar boat. Self-priming and easy to clean. Solvent welded construction. Will withstand temperature to120 degrees F. Removable foot valve for cleaning. Length: 18". Dia.: 1-1/4". Strokes/Gal.: 10. Pumps: 6 gal./min. Recommended for canoes, inflatables, kayak rowboat, sail (under 14') and home and RV.
SKU: 60039
Category: Marine Pumps Hoses And Fittings Hand Operated And Oil Change Pumps Beckson

Handy for bench and field cleaning. Bronze brush is sturdy for thorough cleanings. Threaded for all Traditions and similar ramrods. 10/32 Threaded.
SKU: 72808
Category: Shooting Black Powder Guns & Accessories Quick Loaders

M531 (Reservoir Kit) Fits ARCO PumpNo. 6227 Volvo No. 854531-1 Includes Reservoir, Cap, And O-Ring
SKU: 61477
Category: Marine Motor Accessories Replacement Tilt/Trim Motor And Repair Kits Arco

Compact, sturdy aluminum body, anodized against corrosion inside and out. Unbreakable Lexan lens. 7 5/8" long, 11.1 oz., up to 15,000 candlepower. Adjustable focus, spare bulb in end cap. Battery: Nickel-cadmium 3.6 Volt, 1.8 amp hour, sub-C; rechargeable up to 1,000 times. Bulb: 3.7 Volt, 6 watt, xenon gas filled bi-pin. Material: Virtually indestructible machined aluminum housing with non-slip rubber grip; unbreakable polycarbonate lens. Color: Black Weight: (with battery) 11.1 ounces Length: 7.7 inches Run Time: 1 hour of continuous use between chargers. Candlepower: Up to 15,000 Special Features: Tailcap switch lets you choose between momentary or constant operation. -AC charger for in-home use -DC charger for vehicle use -Piggyback, Steady 10 Hour Charger Double your battery power! Now you can charge your Stinger flashlight while simultaneously charging its spare battery with the Piggyback charger.
SKU: 82657
Category: Flashlights & Lighting Flashlights & Accessories Streamlight

Built to slightly different dimensions than regulardies. Allows optimum sizing, expanding, seating. crimping needed to load great lead bullet ammo. The dies look different, instead of the satin steel finish, they look ''case hardened'' with brass lock rings.
SKU: 49329
Category: Shooting Reloading Dies & Accessories

- Compact, polymer body, non-slip grip. - Battery: Nickle-cadmium 3.6 Volt, 1.8 amp hour, sub-C; rechargeable up to 1,000 times. - Bulb: 3.7 Volt, 6 watt, xenon gas filled bi-pin; spare bulb in tail cap. - Material: Super tough, non-conductive nylon polymer with non-slip grip; unbreakable polycarbonate lens. - Color: Black - Weight:(with battery) 8.7 ounces - Length: 7.4 inches - Run Time: 1 hour of continuous use between chargers. - Candlepower: Up to 15,000 - AC charger for in-home use - 2.5 hour Fast Charger
SKU: 82652
Category: Flashlights & Lighting Flashlights & Accessories Streamlight

A mixture ofAlox and beeswax formulated to NRA recommendations. Hollow stick design. Handy plastic tube.
SKU: 49000
Category: Shooting Reloading Loading Presses & Accessories

The Universal Pistol Laser is one of LaserLyte's most popular products. It offers 'constant on', push button activation and an ambidextrous switch. There is also the popular Pressure Pad Universal Laser. Both are available in standard and super high power versions - The Universal Laser is now totally redesigned. - More stable, easier to adjust windage/elevation. - Utilizes Kodak lens system manufactured in Germany to produce very small, precise and extremely bright dot. - Includes 24 pre-shaped polymer inserts to fit virtually all handguns. - Machined from aircraft aluminum and anodized for durability. - Less than 2-3/4" long. Standard 650 NM Laser Diode – 500 YD Range Internal Wireless Switch: PLW-0006-140 & PLW-0006-090 Remote Pressure Pad Switch: PLR-0006-140 & PLR-0006-090 Super Bright 635 NM Laser Diode – 1000+ YD Range Internal Wireless Switch:BLW-0007-140 & BLW-0007-090 Remote Pressure Pad Switch: BLR-0007-140 & BLR-0007-090
SKU: 49738
Category: Optics & Sights Laser Sights

Kit includes: table top, 26'' stainlesssteel leg & mount.
SKU: 58922
Category: Marine Boat Seats & Accessories Tables & Table Accessories

Superb accuracy. Terminal penetration.Easy to load. Self-lubricating. Sabot protects bullet in the bore, falls away once bullet exits muzzle
SKU: 47377
Category: Shooting Black Powder Guns & Accessories Balls, Bullets & Sabots