POLAR HEAT SEAT (KOLHEATSEATREVBO/CAM) @ Outdoor Gear online store

Fully multi-coated optics. Twoextra lenses improve resolution, color correction, minimize aberration. Blackened reticle assembly. Black anodized internal tube with crinkle finish minimizes unwanted reflection. Four-fold power change range. Tube & saddle carved from same piece of aircraft grade aluminum. 1/4'' or finer audible & finger-adjustable clicks. Reticle attached with screws, metal ring & sealant. Features RainGuard, a special water repellent coating which causes condensation to form in much smaller droplets when scope is exposed to rain, fog or snow. Water sheets off the coated lenses.
SKU: 49742
Category: Optics & Sights Scopes Bausch & Lomb

Unique design; made of soft plastic, with heavily textured surface for sure grip in dog's mouth. Stays flexible in cold weather. Will not rot; cleanable; ideal for water retrieves. Hollow construction with built-in, self-adjusting valve. White for sight training.Blaze orange for scent training, but is visible to humans. Jumbo: 12"Lx3"dia., 16 oz. Regular: 12"Lx2" dia., 8 oz.
SKU: 52087
Category: Pet Supplies Dog Training

Fully adjustable to hold most handheld radios. Radio can be carried antenna up or down, just by reversing tie-down and harness straps. Quick-release buckle is secure, particularly when radio is carried upside down.
SKU: 82198
Category: Law Enforcement/Military Radio & Phone Cases

Waterproof.Molded foam provides the ultimate in comfort. Ribbed to grip the shoulder. Adjustable length. Black with cartridge or shell loops.
SKU: 48630
Category: Shooting Gun Accessories Leather & Nylon Slings

Cast from pure lead. Perfectly round. 100 of a size in abox. *50 per box.
SKU: 47102
Category: Shooting Black Powder Guns & Accessories Balls, Bullets & Sabots

A new level of quality, accuracy & performance in a factory load. PREMIER SAFARI GRADE & PREMIER PARTITION provide the perfect mix of accuracy, weight retention& on-target energy. Safari ammunition incorporates the Swift A-frame dual core bullets which expand reliably at long ranges. Versatile Premier Partition bullets mushroom completely while providing excellent weight retention.
SKU: 46945
Category: Shooting Ammunition Centerfire Rifle Ammunition Remington

Designed for prolonged seating comfort. Versatile weatherproof seats, double-contoured, roomy, and produce a combination of multidirectional flexibility w/full support, increased shock absorption and reduced seating fatigue. Molded w/deep-rolled front edges to eliminate pressure points, seats and backs have textured surfaces for sitting traction. Seats may be upholstered in a variety of ways. The fold-down back features self-lubricating hinge points. Molded rib pattern accommodates spiders w/5" x 5" or 5-5/8" x 5-5/8" hole pattern for easy customer installation offour 1/4-20 insert nuts (not included). Dimensions: 18-1/4"W x 17"D x 16-1/2"H.
SKU: 58733
Category: Marine Boat Seats & Accessories Boats Seats

The first specially designed bullet for use with a Sabot for muzzleloading shooting. Made of soft, pure lead with a truncated cone. A large hollow point combined with a boat-tail base assures flatter trajectory and maximum expansion at all muzzleloading distances.Sabots are color-coded as per caliber. Packaged in both reusable plastic boxes and blister packs.
SKU: 47282
Category: Shooting Black Powder Guns & Accessories Balls, Bullets & Sabots

TC43344 set of both halves; TC43354 trailer side; TC43364 tow vehicle side; TC45824 bracket, wire and hardware. Bubble pack.
SKU: 59599
Category: Automotive/ATV Trailer Accessories Trailer Wiring And Accessories

Athletic Fit, Lightweight, Leather, Fabric Boot designed for Law Enforcement Professionals. - Full Length YKK Zipper with Velcro Closure - FullGrain and Split Leather Upper - 1000 Denier Nylon - Triple Stitched Upper - Steel Shank - Stitched Outsole - Carbon Rubber, Multi-Tred Traction, Self-Cleaning Outsole - Compression Molded EVA Midsole - Removable Molded Orthotic Innersole - Synthetic Moisture Wicking Lining - Rust Proof Hardware - Weight - 32oz/pair (size 7)
SKU: 98132
Category: Footwear Footwear Original SWAT Original SWAT

Features replacement motor which allows you to carry a spare motor, providing and extra level of security and protection. Removalof the motor also allows cleaning of the strainer and impeller area in the event that the pump becomes clogged. Completely submersible. Silent and vibrationless operation. Ignition protection. Anti-airlock protection. No burn-out when run dry. SS shafts. Rust and corrosion protection. Replacement motors are sold separately.
SKU: 74631
Category: Marine Pumps Hoses And Fittings Bilge Pumps And Float Switches Rule

Protects both eyes & image. Black frames. Sporty & Lightweight. Polycarbonate Unilens. Wrap-around side shield provides excellent peripheral vision. Ultradura hardcoatguards against abrasion & scratching.
SKU: 52355
Category: Hearing & Sight Protection Shooting Glasses/Safety Glasses

De-skunked formula. Seals ports, thru-hull fittings, hatches, windows, topside fittings. Adheres to fiberglass, glass, metal and wood. Stops leaks and waterproofs. Permanently flexible, fast curing. Non-shrinking, non-cracking. One-part genuine marine grade silicone rubber. Will withstand years of the marine environment. Not intended for continuousunderwater use.
SKU: 62240
Category: Marine Boat Cleaning & Repair Products Caulk, Sealant & Adhesives

While expanding the case w/perfect flare, charge the case through the hollow expanding plug.Includes powder funnel adaptor. Also used w/Lee Auto-Disk Powder Measure for automatic case charging.
SKU: 49097
Category: Shooting Reloading Dies & Accessories

Constructed of HDPE (white poly) and polypropylene, U.V. stabilized tubes. Lifetime guarantee. All racks come with HDPE mounting boards. Fully assembled with hand tag. 65621: 11-1/4''L x 11-15/16''H x 2-5/8''D. 65622: Has knife and pliersholder. 17-7/8''L x 11-15/16''H x 2-5/8''D. 65623: 15-7/8''L x 11-15/16''H x 2-5/8''D.
SKU: 58296
Category: Marine Fishing Equipment & Accessories Rod Holders/Racks

Athletic Fit, Lightweight, Leather, Fabric Boot designed for Law Enforcement Professionals. - Full Grain and Split Leather Upper - 1000 Denier Nylon - Triple Stitched Upper - Steel Shank - Stitched Outsole - Carbon Rubber, Multi-Tred Traction, Self-Cleaning Outsole - Compression Molded EVA Midsole - Removable Molded Orthotic Innersole - Synthetic Moisture Wicking Lining - Rust Proof Hardware - Weight - 31oz/pair (size 7)
SKU: 98135
Category: Footwear Footwear Original SWAT Original SWAT

New feature enhancements to this versatile, lightweight 3-season tent make it and exceptional value. Clear windows on each side, plus built-in mud mat. Hinged gear loft easily converts to hang as a handy mesh organizer. Hooded fly front and rear permits venting in any weather. Free-standing, 2-pole dome design for fast and easy set up. 75D StormShield polyester cloth fly for exceptional UV and acid rain resistance. Side opening door for easy entry Twin-track zippers for separate operation of doors and windows Self-supporting, free-standing, 2-pole dome design Major floor and fly seams factory taped and sealed 2 mesh storage pockets, 2 gear loft/clothesline attachments and a flashlight loop Ring and pin assembly Storm loops on the fly for guyout points in wind Hooded fly front and rear for all-weather ventilation, zippered roof vent Clip attachments quickly and easily attachtent to frame sections 6 lbs 3 oz
SKU: 101275
Category: Camping/Hiking Tents & Accessories

American legend with oval shaped Kraton G thermoplasticelastomer handles. High carbon steel blades, epoxy powder coated, buff polished edges. Powder-coated, powdered metal butt caps, carbon steel guards. Leather sheath.
SKU: 54337
Category: Knives & Edged Tools Knives Ka Bar

100% cowhide. 1" harness brown strap with slide leather buckle. Pad has 2 inner layers of foam, lined with suede. Stitched in nylon thread for extra strength.
SKU: 47915
Category: Shooting Gun Accessories Leather & Nylon Slings

Federal's most comprehensive assortment of loads forvirtually every shooting situation. components for each load are matched for superior performance.
SKU: 46927
Category: Shooting Ammunition Centerfire Rifle Ammunition Federal

High system capacity.3" blower produces 170 CFM; the4" blower 240 CFM. DetMar's in-line design translates into higher system airflow under pressure for any hose, collector box or vent configuration. HIGH EFFICIENCY: Specially designed 5 blade bullet-nosed impeller and chambered stator vanes to provide high pressure with minimum of air turbulence, reducing motor loading, maximizes efficiency and prolongs motor life. Reliability. DetMar uses professional third-party testing and certification using Underwriter's Laboratories UL 1128, a 31 part analysis that includes testing of salt spray corrosion resistance, humidity exposure resistance, vibration and shock resistance, housing and fan durability, low and high temperature performance, ignition protection, capacity, locked-rotor and blocked-inlet performances. Meets or exceeds ABYC H-2, NMMA Certified USCG 33 CFR Sections 183.410 and 183.425 as well as ISO 9097. CONSTRUCTION: Housing is molded of corrosion-proof ABS plastic with built-in mounting brackets. Molded tabs on all hose flanges provide positive hose connections. 3 year Limited Warranty
SKU: 59652
Category: Marine Pumps Hoses And Fittings Bilge Blowers And Vents Detmar

Black & red w/gold-embroidered Browning signature. Corduranylon, heavy-duty mesh. Includes belt, quick-release buckle.
SKU: 48377
Category: Shooting Gun Accessories Shotgun Accessories

Designed for home protection or police work. Makes on-off flashlight attachment as easy as changing magazines. Maintain lighted visual control, gun control, use of free hand to open doors, key 2-way radio contact etc. Allows comfortable firing with both hands.
SKU: 51614
Category: Flashlights & Lighting Flashlights & Accessories Quik 2 See

Made for the professional hunter, guide, or outfitter but sure to be appreciated by sportsmen everywhere the Pro Lites can do it all. If you're skinning muskrat, moose, or just cleaning a catfish for supper, one of these blades is sure to be right for the job. Available in clip point, drop point, or tanto point configurations, both blades are big and wide with plenty of belly and ground thin at the edge so they will sheer deep and cut cleanly into anything. The tough, 440A Sub Zero Quench blades are honed to hair shaving sharpness for an edge that will stand up to skin or scale. Extra hearty, durable handles were the only choice for knives like the Pro Lites so Cold Steel made theirs out of Zytel. They're injection molded in two parts then reinforced with stainless steel liners and locked together by five bolts. They are lightweight and tough beyond belief. To protect your fingers from their super keen edges, the blades are rigidly locked in place with strong leaf spring locks. This locking mechanism has been extensively tested and will reliably hold 100 pounds without catastrophic failure making it the equal of any lock in the world when it comes to safety. Your Pro Lite wouldn't be very useful if you couldn't keep it handy or open it quickly in an emergency. That's why the blade is equipped with a thumbhole for easy, ambidextrous, one-handed opening and the handle is equipped with a strong pocket clip. No Sheath. Features: Black Teflon Coated Blade Specifications: Weight: 5.6oz Thick: 9/64" (3.5mm) Blade: 4" Overall: 9 1/8"
SKU: 98814
Category: Knives & Edged Tools Knives Browning

Moly is a dry film lubricant. No jacket fouling in barrel. Enhance accuracy of bullets. Non-toxic,environmentally safe.
SKU: 49376
Category: Shooting Reloading Bullets Hornady

2-7/8'' clear anodized posts, 9'' dia. machined bases. Meet/exceedABYC standards. Positive-locking handles w/SS components. J-slot locking channels. Gas powered cylinder. PowerLock handle controls swiveling/height adjustment. TrimLine friction control. TwinGlide bushing system. EZ-Lock cam-action mechanism; when engaged, seat mount is positively locked to post, swivels freely.
SKU: 58900
Category: Marine Boat Seats & Accessories Boat Seat Accessories

Great for practice or league shooting. Triple-Plus plastic wad column. Extra hardshot. Eight segment crimp. 25 rounds/box, 10 boxes/case.
SKU: 46951
Category: Shooting Ammunition Shotshells Federal

Makes an old gun shoot straight and true. Both have special .360 dovetail cuts that fit most European imports. MODEL 16AML - Folding leaf,fully adjustable for elevation. model 37ml - White bead front for low light conditions. 1994 SET: Includes one each - 16AML, 37ML.
SKU: 50283
Category: Shooting Black Powder Guns & Accessories Sights

12" x2-1/2" straight roller. Hole size 5/8". Long life polyurethane will not mark or discolor boat. Retains shape.
SKU: 59489
Category: Automotive/ATV Trailer Accessories Bow And Keel Rollers/Stops/Guides And Accessories

Traditional lightweight fluke-type anchor. Specially formulated full protection coating. Coated and undercoated for maximum protection from scratches and abrasions fromnormal use.
SKU: 60657
Category: Marine Anchors, Paddles, Poles, & Accessories

2roller covers made of rayon w/paper cores.
SKU: 62172
Category: Marine Boat Cleaning & Repair Products Painting Accessories

This 9/16"x50' tube rope has a 3/8" diameter bungee cord spliced inside. Rated at 4,150 pounds tensile strength, conforming to WSIA recommendations for 1-4 ride tubes. It reduces wear and tear on tubes and riders too, by absorbing sudden jerks from slackin the line. A Rope Keeper is included.
SKU: 74439
Category: Watersports Ropes, Harnesses & Accessories

Super absorbent, with an excellent tooth for added cleaning action. The patches come in a variety of sizes for rifle/pistol, shotgun, and universal use. In clam packs, oreconomy size bags.
SKU: 51115
Category: Shooting Cleaning & Maintenance Cleaning & Maintenance Products

6270 (Complete) Fits Late Model Mercury Outboard 225-275 HP Using Oildyne Pump Mercury Nos. 823653A5, 92459A4 TR218 Brush Kit
SKU: 61521
Category: Marine Motor Accessories Replacement Tilt/Trim Motor And Repair Kits Arco

Athletic Fit, Lightweight, Leather, Fabric Boot designed for Law Enforcement Professionals. - Full Grain and Split LeatherUpper - 1000 Denier Nylon - Triple Stitched Upper - Steel Shank - Stitched Outsole - Carbon Rubber, Multi-Tred Traction, Self-Cleaning Outsole - Compression Molded EVA Midsole - Removable Molded Orthotic Innersole - Synthetic Moisture Wicking Lining - Rust Proof Hardware - Weight - 31oz/pair (size 7)
SKU: 98135
Category: Footwear Footwear Original SWAT Original SWAT

Thumb loop.Stamped with traditional Remington "R". USA made. Lifetime warranty.
SKU: 48598
Category: Shooting Gun Accessories Leather & Nylon Slings

Vibrant multi-colored silk screen prints.100% pre-shrunk cotton.
SKU: 73333
Category: Clothing Novelty T's And Sweats

The AccuMold Elite Expandable Baton Holder is made of Trilaminate construction. 2 ¼”web belt loop. Plain Black, Basketweave Black or Hi-Gloss Fits: ASP, Monadnock and similar expandable batons Small: 16”-21” Large: 26”
SKU: 83058
Category: Law Enforcement/Military Baton/Flashlight Holders

Attaches to any StingRay or Sting Ray Junior Hydrofoil Stabilizer to neutralize propeller steering torque. They act like miniature rudders to help the boat track straight and minimize the propeller's natural pull to the right. This reduces steering effort for the driver. Skin pack.
SKU: 60746
Category: Marine Motor Accessories Trim/Tilt Units Tabs Lifts Stabilizers And Accessories Sting Ray

Plastic shell with nylon camouflaged cushions. Comes with heavy-duty zinc plated swivel. Dimensions:20" across seat, 15"H x 17" front to back.
SKU: 58961
Category: Marine Boat Seats & Accessories Boats Seats

For .850 track.Bolt size: 3/16"x5". Nylon.
SKU: 59159
Category: Marine Boat Covers, Bimini Tops & Accessories

Uniformthickness of .015, these economical patches are 100% cotton. Non-toxic and biodegradable.
SKU: 47100
Category: Shooting Black Powder Guns & Accessories Shooting Patches

One part Thiokol¨ Base Polysulfide sealant cures to a positive waterproof seal. Resists oil, gas, brine, water, weather & most chemicals. Bonds to wood, fiberglass, metal, plastic & glass. No priming required except on oily woods such as teak. Colors: white, black, mahogany & teakbrown.
SKU: 62350
Category: Marine Boat Cleaning & Repair Products Caulk, Sealant & Adhesives

A long-sleeve shirt for cold weather. Quiet, warm and comfortable with a full-bodied cut and extra-long tails.Made from rugged 100% 9.5 oz. cotton chamois. Color: Mossy Oak Breakup Size: XXLarge Neck: 18 ½”-19” Chest: 50"-52" Sleeve: 36"-37"
SKU: 82542
Category: Clothing Camouflage Clothing

100% waterproof, fogproof, shockproof. Fully multicoated lenses. Advanced ClearCoat optics. Extended eye relief. Positive click adjustments for windage/elevation. One-piece construction, Nitrogen filled, O-ring sealed.
SKU: 49638
Category: Optics & Sights Scopes Nikon

Urine collected from a single doe. Attracts both buck and doe deer all season, and is especially effective inearly season. A great cover scent all season long.
SKU: 53006
Category: Hunting Scents

Provides 4-1/2'' of fore-aft travel. 12 locking positions.Low profile. 13''L x 7-1/4''W x 3''H.
SKU: 59000
Category: Marine Boat Seats & Accessories Boat Seat Accessories

Used to stop water flow through drains from baitwell or livewell. Plugworks great with T.H. Marine overflow drain tubes. Black injection molded. Features a large ring for easy removal. It also has a double ring seal.
SKU: 60307
Category: Marine Pumps Hoses And Fittings Valves Fittings Connectors And Deck Plates T. H. Marine

Strong , resilientexterior impact absorption. Padded interior, dimensions 51-3/8"x12-5/8"x1-7/8". Holds two rifles. Pair of key locks and padlock receptacles (padlocks not included).
SKU: 48517
Category: Shooting Gun Cases Hard Long Gun Cases

Aluminum Chive - Smoke Black/White Steel: 420HC Stainless Steel Handle: 410Stainless Steel Blade: 1 15/16" Closed: 2 7/8" Weight: 1.9 oz
SKU: 99237
Category: Knives & Edged Tools Knives Browning

Rigid molded plastic. 19" dia. Flush mount base plate and 26" removable stanchion.
SKU: 58981
Category: Marine Boat Seats & Accessories Boats Seats

The Neoprene knee pads are an all black nylon laminated pad to provide substantial protection for SWAT and Corrections use. Made of incredibly durable neoprene on the outer layer, they feature shock absorbing 10mm mamory foam and a layer of pu foam on the inside. They can be worn under or over clothing, and are very flexible for greater body movement. Designed to provide optimum comfort for extended wear. Velcro closures on the pads secure fit when crawling, kneeling, or running.1 Size Fits All.
SKU: 64307
Category: Law Enforcement/Military Protection & Body Armor

Vehicle mount system-includes truck mountable 12-voltDC direct wire mounting rack and shoulder strap. (No AC charger.) High-intensity 8-watt spot lamp. High impact ABS thermoplastic housing; rubberized impact bumper, lens ring and cushioned grip handle. Dual filament offers instant back up. Battery: 6 Volt, 10 amp hour, sealed lead acid; rechargeable up to 500 times. Bulb: High-intensity halogen 8 watt spot, Par 36 Material: High impact ABS thermoplastic housing; rubberized impact bumper, lens ring and cushioned grip handle. Color: Orange Weight: (with battery) 7.4 pounds Dimensions: 11.5" (L) x 5.1" (W) x 7" (H) Run Time: 8 watt = 8 hrs. Candlepower: 8-watt spot up to 50,000
SKU: 82651
Category: Flashlights & Lighting Flashlights & Accessories Streamlight

Redesigned in accordance with ABYC H31.6.1. Components snap together and lock toprevent accidental detachment. Seat mount: Black E-coat steel. 2''H installed, 3 deg. tilt. ABYC Code: AN-Type A: Non-operator. Post: 13''H fixed. Clear anodized finish. Base: 9'' round, aluminum, w/2.75'' dia. mounting hole or 7'' x 7'' SS finish with 2.5'' dia. mounting hole. ABYC Code: AN-Type A: Non operator.
SKU: 58977
Category: Marine Boat Seats & Accessories Boat Seat Accessories

Leather dim.: 7" x 6-1/2". Button dim.:1/2" x 13". Consists of 2 leathers & 2 buttons.
SKU: 60294
Category: Marine Anchors, Paddles, Poles, & Accessories

1-piece, multi-function universal quiver system. Soft Loc Rail Gripper, pair of rubber grippers similar to the arrow gripper on the quiver, are mounted to a riser mounting platethat permanently mounts to the bow. Two aluminum guide rails allow infinite vertical adjustments.
SKU: 56022
Category: Archery Quivers & Accessories

For standard Kleen-Bore cleaning equipment.
SKU: 51043
Category: Shooting Cleaning & Maintenance Cleaning & Maintenance Products

Features: - Genuine horsehair handle offers an attractive and unique design - Full-tang construction - Beautiful walnut case doubles as display stand - Excellent gift idea - A must have for knifecollectors Specifications: - Steel: AUS-8A - Handle: hitched Horsehair - Blade Length: 3 3/8" - Type: Fixed Blade
SKU: 99117
Category: Knives & Edged Tools Knives Browning

SL-3 SINGLE-LEVER CONTROLS for outboards & I/O & inboards Easy to install. Provides dual-function, single-lever control for virtually all sterndrive, outboard & inboard engines. Push-button locks in place & dis- engages clutch for engine warm-up. Power tilt switch on trim plate of deluxe models for beaching & trailering. Crisp, positive detents for clear feel of each gear selection. Gear mechanism completely enclosed & permanently lubricated. Neutral interlock trigger in handle of side mount controls help prevent accidentally starting in gear. Adjustable brake prevents throttle creep. Removable cover for simplified installation or adjustment. Side mount control mounts either port or starboard& from front or rear of panel. Power trim switch in handle grip of deluxe models for easier trimming w/safe & convenient one-hand operation.
SKU: 62233
Category: Marine Controls & Steering

Perfect companions for the shotgun grip models. Made specifically for TacStar front & rear shotgun grips. Enhancesthe unique handling qualities. Soft rubber construction. Provide soft feel, added control. Fits all models of TacStar grips.
SKU: 50330
Category: Shooting Gun Accessories Grips

Horizontal carry for fast draw. Compact, lightweight. Shell made of tough grade smooth nylon to avoid chafing under arm. Elastic back strap adj. for best fit, attaches to harness yoke w/spring clip. Molded thumb break, non-stretch retention strap.Removable elastic tie-down w/nickel plated clip, anchor holster without belt. Ambidextrous. HOLSTER SIZE GUIDE - CLICK BELOW "VIEW HUNTING CATALOG PAGE". PAGES 838-840.
SKU: 48023
Category: Shooting Holsters, Leather & Accessories Holsters Uncle Mike's

Die cast aluminum handle. SoftGrip injection molded rubber inserts. 440A stainless steel blade. Stainless steel pocket clip. Stainlessfasteners. Locking liner. Lanyard hole. One-hand opening.
SKU: 54383
Category: Knives & Edged Tools Knives Gerber

Made of a tough, weatherresistant composite material. #11 percussion caps.
SKU: 47503
Category: Shooting Black Powder Guns & Accessories Cappers & Accessories

Down garments are appreciated for their warmth and versatility, an excellent choice to be worn alone as outerwear oras a layering garment in the X-Change System. Down is nature's original insulation, proven all over the world to be perfect for the coldest, most extreme conditions. - Downproof Microfiber shell - 650 fill-power goose down insulation - Taffeta lining - Full length front zipper closure - Stand-up, zip-through collar - Drawcord adjustable bottom - Elasticized cuffs - Two lower slash pockets and single inside pocket with zippered closure - Stuffs into included stuff bag - X-Change System compatible _________________________________ Men's Apparel Sizing Information: Small: Chest = 37-39", Waist = 38-31", Neck = 14-14.5", Arm = 32-33" Medium: Chest = 40-42", Waist = 32-35", Neck = 15-15.5", Arm = 33-34" Large: Chest = 43-45", Waist = 36-39", Neck = 16-16.5", Arm = 34-35" XLarge: Chest = 46-48", Waist = 40-43", Neck = 17-17.5", Arm = 35-36" XXLarge: Chest = 49-51", Waist = 44-46", Neck = 18-18.5", Arm = 36-37" XXXLarge: Chest = 52-54", Waist = 47-49", Neck = 18-19", Arm = 36-37"
SKU: 98923
Category: Clothing Odor Management Clothing

Wide beltloop provides stable carry. Integral thumbsnap enhances handgun retention. High ride for maximum comfort. Open muzzle. 1-3/4" belt slot. FIT GROUPS-CLICK BELOW "VIEW HUNTING CATALOG PAGE" LINK FOR COMPLETE CHARTS.
SKU: 48495
Category: Shooting Holsters, Leather & Accessories Holsters Bianchi

High performance, built to meet orexceed stringent law enforcement standards, including tough barrier tests. Using Uni-Cor technology of bonding the jacket to the core, eliminates core/jacket separation.
SKU: 49274
Category: Shooting Reloading Bullets Speer

All purpose, adhesive backed, noise eliminating. 3" x 7". 2-Pack. Black.
SKU: 55725
Category: Archery Silencers - Noise Eliminators

Sidekick laminate of Cordura nylon. 1/4'' foam padding & nylon lining. Body of holster is suspended within co-polymer exoskeleton. Belt loop clamps holster tightly to 2'' or 2-1/4'' duty belt. Retention strap, thumb break stays open for easy re-holstering. Contoured design. Jacket slot belt loop providesoffset to position holster outside of Ike or Tuffy jacket. Molded sight track. Accepts Spacer Pack. HOLSTER SIZE GUIDE - CLICK BELOW "VIEW HUNTING CATALOG PAGE". PAGES 838-840.
SKU: 48140
Category: Shooting Holsters, Leather & Accessories Holsters Uncle Mike's

The only way to improve on the design and technology of the X-Bullet was to add something to it. The XLCCoated X-Bullets have been coated with the Barnes high-tech, solid dry film lubricated coating. This coating reduces friction in the bore, reduces fouling for high velocity shooting, reduces heat build up and improves accuracy. This has all the benefits of the X-Bullet and more. The XLC Coating is a proprietary formula, which is applied wet by state-of-the-art spray equipment, one bullet at a time and cured in an infrared oven. Because of the composition and method used to apply and cure the coating, it will not rub off. The XLC coated bullets will reduce pressures by more than 11% and reduce cleaning time by 37%. Due to the reduction in friction, accuracy is staying consistent for a longer period of time as well as a reduction in cleaning time and frequency. Unlike the other coatings, with Barnes XLC Coated X-Bullets you can expect an increase up to 185 f.p.s. in velocity. Features: - X-Bullet Technology - All copper construction - No fragmentation - Four razor sharp cutting edges for deeper penetration - More one-shot kills - Coating reduces pressure & fouling - Coating is permanent (moly) - Coating keeps barrels cooler - Coating enhances accuracy - Coating does not coat the bore - Coating increases velocity
SKU: 82727
Category: Shooting Reloading Bullets Barnes