HEADSPACE GAUGES- RIFLE & PISTOL (LYMHEADSPACEGAGE308) @ Outdoor Gear online store

Produces all natural sounds to the Canada Goose. Easy to blow.Great volume.
SKU: 53753
Category: Hunting Calls Goose Calls

12097: Use for thinning Polypoxy paints. 12120: All purpose thinner for washing hull; equipment cleanup and thinning most Pettit paints and varnishes for brush application. 12121:Use for thinning most Pettit paints and varnishes for spray application. 12185: For thinning ACP-50 only.
SKU: 62452
Category: Marine Boat Cleaning & Repair Products Thinners

Single stage loaderlets you load all types of shotshells: field, hunting, target and magnum, in plastic or paper case, high or low brass, 6 or 8 segment crimp, 2-3/4" or 3" shells. Full length sizes the entire head including the rim. Large capacity hoppers hold over 5 lbs. of shot and enough powder for over 125 rounds. All operations end on a positive stop including wad seating. Patented one-piece wad guide and a spare. Includes safety charge bar with 24 shot and powder bushings, primer catcher and case head positioner at every station.
SKU: 48812
Category: Shooting Reloading Loading Presses & Accessories

Endorsed by NWF. In-Line tri-dot fiber optic system. Accuracy in extreme low-light conditions. Contrasting fiber colors in front &rear sights.
SKU: 50378
Category: Optics & Sights Sights & Accessories Truglo

See under allows use ofRear Sight. Built-in rail. Can be interchanged with short rail for compact scopes such as Beeman, Simmons. Built-in brass deflector. Quick windage adjustment using no shims. Works with regular or electronic scope. Repeats zero. Comes with 1" Tru-Fit rings, no gunsmithing necessary.
SKU: 49510
Category: Optics & Sights Scope Mounts, Rings, Bases Eagle

Surgical steel blades and "lubricatedfor life" bearings. 1-3/4" drop-point blade. Length open, 3-3/4". Closed, 2". Light, smooth and tough.
SKU: 54210
Category: Knives & Edged Tools Knives Gerber

Quality-made metal jags. Draped with apath, completely covers the bore for a thorough cleaning.
SKU: 73406
Category: Shooting Cleaning & Maintenance Cleaning & Maintenance Products

Easy to use push-button lock mechanism. Available in 1/2" or 5/8". Combination lock package includes 5/8" receiver lock and 1/4" coupler lock keyed alike. Barrel key of die cast steel. Protective cap guards against dirt and moisture getting into lock mechanism.
SKU: 59662
Category: Automotive/ATV Trailer Accessories Balls Couplers/Hitches Chains And Accessories

Redding Series A Deluxe 3-Die Sets (260 Remington) - #84531 Deluxe die sets for bottleneck cases contain three dies. The full length resizing die contains a decapping rod assembly with a neck expander. The seating dieincludes bullet guide, built-in crimping ring and the proper seating plug. Also includes a neck sizing die. Contains: - Full length sizing die (#91531) - Seating Die (#92531) - Neck Sizing Die (#81531) - Decap rod assembly (#33263) - Size button (#42263)
SKU: 72596
Category: Shooting Reloading Dies & Accessories

Holds two .45 or 9mm magazines. Velcro flaps and four-way beltloop for vertical or horizontal carry. Made of cordura nylon.
SKU: 48046
Category: Shooting Holsters, Leather & Accessories Magazine Pouches Uncle Mike's

For more than 35 years, AA Target Loads have reigned as the standard of excellence and overwhelmingchoice of serious target shooters the world over. The improved AA's will carry on this standard for years to come. Each AA load features improved components and an innovative new, high strength tube construction designed to improve upon the ballistics and performance of the traditional AA Compression formed hulls. The result? AA Target loads delivering higher velocities, increased reloadability and tighter bird busting patterns. One of the benefits of copper plated shot is that it adds lubricity and hardness to the shot, which reduces deformation and improves pattern performance. This year, dominate your sport-Load up with Winchester AA Target Loads. Symbol: AAHA127 Super Handicap Gauge: 12 Length of Shell: 2 3/4" Powder Dram Equivalent: 3 Shot Size: 7 1/2 Oz. Shot: 1 1/8 Velocity fps @ 3ft: 1250
SKU: 83016
Category: Shooting Ammunition Shotshells Federal

Deluxe die sets for bottleneck cases contain threedies. The full length resizing die contains a decapping rod assembly with a neck expander. The seating die includes bullet guide, built-in crimping ring and the proper seating plug. Also includes a neck sizing die.
SKU: 72640
Category: Shooting Reloading Dies & Accessories

Rifle Bullets 375 Caliber (.375) 220 Grain Flat Point InterLock Packed Per 100 No matter what kind of game you're hunting, you need the right bullet. And, for any hunter worldwide, the right bullet is Hornady InterLock. InterLock is designed for hunters who understand that a bullet must be evaluated two ways: first, on how consistently it can be delivered to an exact point of aim; and second, on what happens once it reaches that point. It's precisely that combination of accuracy and performance which makes InterLock the reliable choice for any hunting situation. The InterLock bullet is designed to be the most dependable bullet you can take with you into the field. The InterLock ring assures perfect mushroom expansion without jacket/core separation. As a result, thebullet retains more mass, energy and momentum after impact. This stopping power has earned InterLock its deadly reputation. Hunters worldwide use InterLock bullets to take everything from antelope to zebra and from whitetails to wildebeest. It's such a proven performer, Hornady selected it to load into our enhanced performance Light Magnum and Heavy Magnum ammunition. How the Interlock Bullet works: It all happens in less than 1 /100th of a second. Yet it takes decades of experience in the design and manufacture of bullets to make it happen the same shot after shot after shot. InterLock consistently performs under more shooting conditions than any other bullet. 1. On impact, the soft lead point is immediately pushed back and begins to expand in diameter. 2. The copper jacket, inner grooved at the bullet's point, folds back behind the leading edge of the expanding lead core. 3. The classic mushroom is achieved by the jacket and core expanding at the same rate. Expansion is controlled by increased resistance from the growing thickness of the copper jacket. 4. The InterLock ring, imbedded in the lead core, assures that the jacket and core will not separate as the bullet reaches its full expansion.
SKU: 82841
Category: Shooting Reloading Bullets Hornady

This hose addresses rigorousEPA standards by greatly reducing hydrocarbon permeation through the hose. Meets or exceeds ISO 7840 Type A1 standards. Approved by the USCG, NMMA, and the European community for all pleasure boat fuel systems - gasoline or diesel - inboard or outboard. High burst pressure ratings allow for use in fuel injection systems. OD: 1-1/32". Ply: 2. Burst Pressure: 175#.
SKU: 59799
Category: Marine Fuel Tanks & Accessories Hose & Hose Clamps

High performance. Super-Grex buffering. 5 rounds/box, 50 boxes/case.
SKU: 46852
Category: Shooting Ammunition Shotshells Winchester

For boatsto 39.4'/12 meters. One mile, 225 deg. visibility. Die-cast Zamak with Perma-Plate chrome finish. Housing encases socket. 2 holes for #8 flat or oval head screws. Size: 1-3/8''H x 2-3/4''L x 2-1/2''W (at base). Deck mount.
SKU: 57822
Category: Marine Lighting Boat Lights

Made of top grain leather. One holster loop & 25 cartridges. Heavy-duty buckle. Cuton a curve to hang low on the right hip. 2-5/8" wide. Add 2" to waist size. Tan.
SKU: 47693
Category: Shooting Holsters, Leather & Accessories Belts Hunter

Nearly indestructible polycarbonate lensesprotect your eyesight. Reduces UV rays that reach your eyes. Enhances contrast between target and background. Features adjustable temples and a protective carry case.
SKU: 88215
Category: Hearing & Sight Protection Shooting Glasses/Safety Glasses

Reshape steel or brass base shells to original size. Up date conventional reloaders and take advantage of Power Ring collet resizing device. Place a shell into Power-Ring and pull down the handle. Steel fingers encircle the base and apply even pressure around it until the metal base is reshaped back to its original size. It will handle high or low brass, and can be used with any make ofreloader not already equipped with the Power-Ring re-sizer.
SKU: 48968
Category: Shooting Reloading Loading Presses & Accessories

A cold chemical finish that will not produce a dimensional change. Requires no heat or specialequipment. Excellent for touch-up applications on scratched aluminum surfaces.
SKU: 50961
Category: Shooting Cleaning & Maintenance Cleaning & Maintenance Products

Complete with 30amp fuse and 12-gauge orange wire leads. 4-1/2" leads on both ends.
SKU: 60058
Category: Marine Electrical Accessories Electrical Accessories

Fuel tank fittings and hose fittings are suitablefor use w/ leaded, unleaded, and alcohol-blended fuels. Molded acetal, 3/8" I.D. hose barb.
SKU: 59861
Category: Marine Fuel Tanks & Accessories Miscellaneous Accessories

Light, compact. No assembly required. Washable, reusable. Built-in bronze brushes. Includes: BoreSnake, BoreCleaner, Bore Oil, 2 Anti-rust gun-cloths & a lever to aid in pulling theBoreSnake through the bore.
SKU: 51076
Category: Shooting Cleaning & Maintenance Cleaning Systems & Accessories

Fixedand variable power. Target style adjustable knobs. Superior image quality, excellent light transmission. Generous eye relief. Rugged/waterproof. Full lifetime warranty. Made in Oregon, USA.
SKU: 73187
Category: Optics & Sights Scopes Leupold

Protects outboard motors, marineengines and other internal combustion engines. Keeps pistons, rings and cylinder walls corrosion-free. Preserves fishing reels, tools and metal surfaces from rust and corrosion.
SKU: 62340
Category: Marine Boat Cleaning & Repair Products Lubes & Additives

8" round solid aluminum rod.One steel weight.
SKU: 54904
Category: Archery Stabilizers And Accessories

Load slugs for less than standard trap loads. Lee Drive Key slug is loaded in standard trap hull with standard wad and conventional folded crimp. Slug loads are produced with any standard shot shell reloading press. Drive key positively rotates the slugin rifled shotgun barrels. Key doubles as a support rib allowing use of a standard trap wad - no need for a support wad or base filler. Velocity & accuracy meet & exceed factory loaded rifle slugs. Molds have self centering automatic core pins.
SKU: 73144
Category: Shooting Reloading Shotgun Molds Lee Precision

Requires no sizing. Designed for use with a liquid lubricant. More accurate than ordinary cast bullets, they have a multi-grooved shank for liquid retention and a bevel base just behinda solid band. Handles included with the double-cavity molds. 6-cavity molds have a cam-operated sprue plate, less handles.
SKU: 73140
Category: Shooting Reloading Bullet Making

Water-resistance, improved high performance. Developed to meet the wet-weather needs of waterfowlers. Specialpolished, rust resistant steel shot. 25 rounds/box, 10 boxes/case.
SKU: 46880
Category: Shooting Ammunition Shotshells Winchester

Starts wetengines. Lubricates. Loosens rusted parts. Protects against corrosion.
SKU: 62335
Category: Marine Boat Cleaning & Repair Products Lubes & Additives

Browning shooting gloves are stylish, functional and most importantly, their quality is everything you expect from something that bears the name Browning. - Made from water-and perspiration-resistant Pittards WR100X leather - Washable, dries soft - Lined with CoolMax fleece - Stretch-mesh back panelfor more comfort and better fit - Adjustable hook and loop wrist tab closure with Browning logo _________________________________ Men's Gloves Sizing Information: (Measure around the flat of the hand just below the knuckles, excluding the thumb. Number of inches around hand equals glove size) XSmall = 7 - 7 1/2" Small = 8 - 8 1/2" Medium = 9 - 9 1/2" Large = 10 - 10 1/2" XLarge = 11 - 11 1/2"
SKU: 98821
Category: Clothing Gloves, Mittens & Handwarmers

6MM (.243) 58 Grain V-Max (Varmint Maximum) Moly Coated Packed Per 100 Hornady V-MAX bullets may be bad news for varmints, but they're great news for your favorite varmint rifle. Because now, V-MAX bullets are available with a performance-enhancing molybdenum disulfide coating. Moly-coating virtually eliminates copper fouling in the rifle bore if you start with a clean barrel, so you can fire more rounds without stopping to clean your barrel. That's a big timesaver when you're varmint shooting. And because moly-coating acts as a lubricant, you reduce barrel wear--your rifle will shoot straighter, longer. Plus, as an added bonus, moly-coated bullets offer faster speeds in most calibers. You can't ask for more from a varmint bullet. Upon impact, the V-MAX tip acts as a wedge, driving backwards into the bullet core and causing dramatic fragmentary expansion--even at low velocities. The light weight of the polymer tip helps place the center of the bullet in the proper relationship to the center of gravity, resulting in optimum flight stability for greater accuracy. The core is swaged up and around the stem of the tip and features a hollow cavity underneath the bottom of the tip, allowing for explosive augmentation once impacted by the tip. The copper jacket is precision engineered to perform in today's fast twist varmint rifles as well as in slower calibers. The overall V-MAX bullet design combines aerodynamic advantages of the polymer tipwith the secant ogive profile creating higher ballistic coefficients. The result is a flat-shooting bullet with better accuracy than comparable varmint bullets. The secant ogive profile, which was pioneered by Hornady for use in hunting bullets, results in low drag and flatter trajectory. The new V-MAX design combines the most ballistically efficient profile with the greatest possible bearing surface for added stability. Boattail and flatbase design both offer maximum stability.
SKU: 82852
Category: Shooting Reloading Bullets Hornady

Cleans gun bores in 10seconds. Clean guns in the field, on a bench or in the shop. Initial floss, built-in brushes and main floss removes powder residue, metal fouling & hardened deposits. Cleans from the breech without assembly. No debris in gun's action. No more broken rods or stuck patches. Washable and durable. Compatible with most solvents & oils. Built-in phosphor bronze bore brushes.
SKU: 47658
Category: Shooting Cleaning & Maintenance Cleaning & Maintenance Products

Horizontal and vertical shock absorbing hitch. Reduces wear on your drive train. Reduces driver fatigue. Design uses the same rubber torsion shocks as Tie Down's heavy-duty torsion axles. Progressive compression absorbs push/pull shocks as well as vertical shocks to your trailerand tow vehicle. Fits standard 2" receivers. 500 lb. tongue weight. Class 2.
SKU: 59691
Category: Automotive/ATV Trailer Accessories Balls Couplers/Hitches Chains And Accessories

Prevents debris from entering pump intake, cutrepairs, installs easily. Works in any position, and is ideal when remote mounting away from pump is needed for easy service access.
SKU: 60377
Category: Marine Pumps Hoses And Fittings Marine Toilets And Accessories Itt Jabsco

One end has traditional size bristles for cleaning large areas, other endfeatures smaller bristles for getting into tighter spots. Brushes are non-breakable, can dig out dirt without scratching metal. Perfect for cleaning breeches in firearms or great as all-purpose cleaning brushes.
SKU: 51273
Category: Shooting Cleaning & Maintenance Cleaning & Maintenance Products

Made of Fiberglass filled plastic. Measures 1-3/16" wide, 7-3/4" long and has 4-1/2"blade.
SKU: 54197
Category: Knives & Edged Tools Knives Choate

Since its introduction in 1989, the Barnes X-Bullet has been praised by gun writers and professional hunters as the most deadly and reliable hunting bullet available. Designed by Barnes' owner Randy Brooks, the X-Bullet is a solid copper projectile, heat treated for extra toughness. There's no separate jacket and no lead core. The bullet holds together for deep, dependable penetration---every time! A deep forward cavity causes the nose to peel back in four separate, razor-edged petals. Viewed head on, the appearance ofthese four petals gives the X-Bullet its name. The X-Bullet out-penetrates other hunting bullets, and has developed a reputation for delivering quick, one-shot kills on a wide variety of game.
SKU: 82724
Category: Shooting Reloading Bullets Barnes

Removes rust,oxidation without harming original metal. Converts rust to stable, solid form. Biodegradable.
SKU: 62714
Category: Marine Boat Cleaning & Repair Products Multi-Purpose Cleaners, Soaps, Conditioners/Protectants

This dress belt is perfect for dress or casual use. - 1 ½” wide - Unlined - Plain Tan - Buckle: Nickel finish
SKU: 83123
Category: Law Enforcement/Military Belt Keepers

No gunsmithing required. Easy to install. Uses Weaver style rings(not included).
SKU: 83592
Category: Optics & Sights Scope Mounts, Rings, Bases Taurus

316 Stainless steel; precisionformed. Carded.
SKU: 63077
Category: Watersports Skis And Ski Accessories

This Sightron SII Series has many features found on scopes costing hundreds of dollars. The one-piece body tube with multi-coated optics has become legendary with competitive shooters and hunters alike. The variable line of riflescopes is designed to allow you to carry one rifle and make easy adjustments for shots at both close and long range. This scopes features 1/4" adjustments on both the windage and elevation control, so making changes out in the field is a breeze. They also feature the patented ExacTrack Windage and ElevationSystem, so you'll know that all your adjustments are absolutely precise and won't be compromised even under heavy recoil. Thanks to Sightron's patented Windage and Elevation Adjustment System, this simple yet innovative advancement features an exclusive erector tube that keeps a positive, flush point of contact from zero alignment through even the most dramatic adjustments. In other words, you never experience drift. Sightron offers a lifetime warranty. They are certain their scopes and binoculars and spotting scopes will live up to your high expectations and never let you down. In fact, they are so sure of it they stand behind every Sightron instrument with a written Lifetime Warranty. -Finish: Stainless -Reticle: Plex -Tube Diameter: 1" -Weight: 16.07 oz. -Length: 13.88" -Field of View @ 100 yards: 22ft.-7.9ft. -Eye Relief: 3.6" -Click Value @ 100 yards: 1/4" MOA
SKU: 83012
Category: Optics & Sights Scopes Tasco

Camouflage, soft,lint-free cloth. Tie closure.
SKU: 48097
Category: Shooting Gun Cases Chaps, Sacks & Sleeves

Endorsed by Barbara Mandrel. 25 rounds/box,10 boxes/case.
SKU: 47052
Category: Shooting Ammunition Shotshells Fiocchi

Full function trim tabs that become powerful trolling motors in just 6 seconds at the touch of a button. Twin screw maneuverability and twice the power from standard stern located trolling motors. 164 lbs. of thrust at 24 volts. Laser cut 12 gauge 304 stainless steel powder-coated trim tabs and hinges. High impact, totally sealed waterproofelectric actuator. Full thrust and steering control with lightweight belt-clip hand control. KIT Includes: Trim tab/trolling motor set, remote control unit, all wiring, and complete instructions. Dash control switch now sold separately.
SKU: 74297
Category: Marine Trolling Motors And Accessories

Promotional game loads. For specific upland & small game hunting. 25 rounds box, 10 boxes percase.
SKU: 46855
Category: Shooting Ammunition Shotshells Remington

Compact,sealed lamp is polycarbonate. Use for many interior or exterior applications.
SKU: 59443
Category: Marine Lighting Courtesy/Utility Lights

Full size 9/16"W band with 1 piece housing and interlocked construction. 300 series stainless band, housing and screw. A marine-gradequality clamp designed for corrosive environments. High nickel alloy stainless steel meets the demands of in ground and marine applications.
SKU: 59787
Category: Marine Fuel Tanks & Accessories Hose & Hose Clamps

Internal tensioning device retains mag. Unique dual purpose loop allows use with belts up to 1-3/4" or can be clipped over the waistband like a paddle.
SKU: 103072
Category: Shooting Holsters, Leather & Accessories Magazine Pouches Uncle Mike's

Flip open lid/handle. Swivel ringfor key chain.
SKU: 54300
Category: Knives & Edged Tools Sharpeners & Accessories

This holster is made to fit inside the waistband. A heavy-duty spring-steel clip keeps the holster securely in place. Made for high ride is can be used for side or crossdraw use. It is double stitched for strength and durability. The thin profile provides optimum concealment along with an open muzzle design. Natural Suede Sizing Chart: Listed Alphabetical by Manufacturer Astra Constable-Size 07 Beretta 21 Bobcat, 3032 Tomcat-Size 08 Beretta 84, 84F Cheetah, 85 Puma-Size 09 Beretta 92/96D Brigadier, 92/96F Centurion, 92F, 92FCM, 96F-Size 13 Beretta 950 Jetfire, Minx-Size 05 Browning BDA .380-Size 09 Charter Arms Undercover 2”-Size 01 Charter Arms Bulldog, Undercover 2” to 2 ½”-Size 02 Colt Detective Special 2”-Size 01 Colt Commander, Officers ACP-Size 09 Colt Detective Special, SD2020 2” to 2 ½”-Size 02 Colt Government .380-Size 07 Colt Junior-Size 05 Colt King Cobra, Python 4”-Size 04 Colt Mustang-Size 08 Colt Python 3”-Size 03 Colt Government .45-Size 13 CZ 75 Compact-Size 09 Daewoo DP52, DH380-Size 07 Derringer Over/Under-Size 05 Detonics Combat Master .45-Size 09 Glock 19, 23, 36-Size 11 Glock 29, 30-Size 12 H&K USP .40/.45-Size 14 H&K USP Compact-Size 12 Interarms Firestar-Size 09 Iver Johnson Pony, TP22/25-Size 08 Llama IIIA-Size 07 Llama Martial, Comanche 4”-Size 04 Para Ordnance P12, P13, Not LDA Models-Size 09 Para Ordnance P14, P16, Not LDA Models-Size 13 Ruger GP1000 3”-Size 03 Ruger GP100 4”-Size 04 Ruger SP101 2”-Size 01 Ruger SP101 2” to 2 ½”-Size 02 Sig Sauer P228, P229-Size 10 Sig Sauer P230, P232-Size 07 Sterling .25, 300-Size 05 S&W 10, 19, 686 3”-Size 03 S&W 15, 19, 586, 686 and similar K&L frame models 4”-Size 04 S&W 36, 38, 40, 49, 60, 640, 649 and similar J frame models 2”-Size 01 S&W 36, 49, 640, 649 2” to 3”-Size 02 S&W 411, 457, 909, 910, 915, 1066, 1076, 1086, 3904, 3906, 3913, 3913LS, 3914, 4006, 4516, 4566, 4576, 4586, 5904, 5906, 5924, 5926, 5943, 5944, 5946-Size 09 S&W 1006, 4506-Size 13 S&W Sigma .380-Size 06 S&W SW40F, SW9F-Size 15 Springfield XD-9, SA-40 - Size 12 Taurus 66, 80, 82, 83, 669, 617T, 445T, 415T, 450T 3”-Size 03 Taurus 66, 80, 82, 83 4”-Size 04 Taurus 85 2”-Size 01 Taurus 85 2” to 2 ½”-Size 02 Taurus PT-92, PT-99, PT-100, PT-101=Size 13 TZ 75-Size 13 Walther PP, PPK, PPK/S-Size 07 Walther TPH-Size 08 Wesson 2H, 2VH, 2, 2V Series 3”-Size 03 Wesson M15, 2H, 2VH, 2, 2V Series 4”-Size 04
SKU: 83111
Category: Shooting Holsters, Leather & Accessories Holsters Bianchi

CLICK ON 'VIEW HUNTING CATALOG PAGE' LINK UNDERNEATH THE TABLE BELOW FOR THE GUNPARTS REFERENCE CHARTS
SKU: 54029
Category: Shooting Replacement Gun Parts Wilson Combat Wilson Combat

Training Batons reduce injury potential whileallowing dynamic, high level simulations.
SKU: 82487
Category: Law Enforcement/Military Training Equipment For Law Enforcement

Stainless steel mounting& keeper screws.
SKU: 62937
Category: Marine Hardware Hooks Hasps & Latches

Motor hoods are provided with NarrowSeries.
SKU: 74563
Category: Marine Boat Covers, Bimini Tops & Accessories

Doesn't gum, harden or turnrancid. For guns, reels and other fine mechanisms.
SKU: 50980
Category: Shooting Cleaning & Maintenance Cleaning & Maintenance Products

Open crown with an elastic band. Pro-vides excellent peripheral vision. Wire frame conforms to the face or fits around glasses.
SKU: 50509
Category: Clothing Warm & Cold Face Masks

TacStar's nylon bushings are designed to adapt smaller diameter flashlights and lasers to any 1 inch diameter mount ring. Has an outside diameter of 1" and an insidediameter of 3/4". Fits 3/4" Diameter Flashlights.
SKU: 82666
Category: Flashlights & Lighting Flashlights & Accessories Tacstar

Water-resistance, improved high performance. Developedto meet the wet-weather needs of waterfowlers. Special polished, rust resistant steel shot. 25 rounds/box, 10 boxes/case.
SKU: 46880
Category: Shooting Ammunition Shotshells Winchester

With the eTrex Legend, Garmin has loadeda full basemap of North and South America into one small unit. The Legend is also designed to provide precise GPS positioning using correction data obtained from the Wide Area Augmentation System (WAAS). This product will provide position accuracy to less than three meters when receiving WAAS corrections. The basemap contains lakes, rivers, cities, interstates, national and state highways, railroads and coastlines. The eTrex Legend is also equipped with additional memory totaling eight megabytes. The added memory allows the eTrex Legend to accept downloaded map data from Garmin's entire line of MapSource CD-ROMs, including Fishing Hot Spots. The eTrex Legend comes in a brightly-colored translucent blue case that really makes the unit stand out.
SKU: 57075
Category: Electronics GPS Systems & Accessories

Rugged, submersible, ultra compact. Powered by Alkaline or NiCad batteries. One, threeor six watt operation. Backlit keypad & display. Dual channel display. Scan. Seek. Tri-watch feature to monitor weather channel, working channel & priority channel. Displays working/priority channels simultaneously. 16 Plus key for channel 16 selection or preset priority channel.
SKU: 57000
Category: Electronics Depthfinders, Fishfinders & Accessories

Inside and out, the Black Ice flashlights are technically superior to other lights. Aluminum construction ensures these lights are tough, while lithium batteries (included) make them some of the lightest, most compact lights made. Models include Xenon/LED technology for long-range stream lighting or long-lasting flood lighting. Specifications: - Bulb: (1) 5mm 0.1W White LED - Batteries: (3) S736S - Battery Life: 12 Hours Note: Battery life varies. Maximum battery life listed. - Lamp Life: 100,000 Hours
SKU: 99122
Category: Flashlights & Lighting Flashlights & Accessories Mag-Lite

Kydex, the long time choice of custom concealment holster makers, has always been made in small numbers. Generally heat formed and shaped from sheet stock, these holsters were labor intensive, costly and often inconsistent. But, Sidekick Professional has drawn from its own injection molding capabilities to produce high quality, low cost Kydex holsters with a level of detailing and quality unmatched by other methods. The injection molded Kydex belt holster has an almost vertical “rake” that allows for conventional “Behind-the-Hip” carry. For some people and some applications, it can function as a “Crossdraw”. For smaller weapons it can be used as an “Appendix Carry” as well. The lead edge of the body is cut down to aid presentation of the weapon: this means a faster draw through a more fluid motion. To further assist the draw and to increase concealment of the weapon, the holster has been designed to ride close to the body and at a mid-length height. The loop is designed to engage a wide variety of belt widths from 1” to 1 ¾”. Right Hand Only - Size 12: Glock 26, 27 - Size 18:S&W 5900 & Certain 4000 Series - Size 19: Up to 5” Barrel 1911 Types - Size 20: Most Beretta 92 & 96 Models - Size 21: Glock 17, 22, 19, 23 - Size 22: SigArms 220, 226 - Size 24: SigArms 225, 228, 229, 245 - Size 25: Glock 20, 21 - Size 31: HK USP Compact (All Calibers) - Size 36: S&W J Frame 38/357 up to 2 1/8” Barrel
SKU: 83063
Category: Shooting Holsters, Leather & Accessories Holsters Bianchi

Designedto improve performance. Heavy duty support holds bottles steady, eliminates movement while reloading. Holds bottles securely when tipping back to change bars and bushings.
SKU: 73165
Category: Shooting Reloading Loading Presses & Accessories

For replacing damaged screws. Blued finish. Set of2.
SKU: 54640
Category: Shooting Gun Accessories Gunsmithing Tools & Accessories

Game Country Automatic Digital Feeder Kit with 6-Gallon Bucket with Hanging Bail. Up to 48 separate daily feedings, at 30 minute intervals, areavailable. Digital readout for accurate easy programming and viewing. Digital display will not freeze or become sluggish in winter. 24-hour electronic clock with AM/PM indicator. Motor speed and run time may be set differently for each feeding. Motor run time from 1 to 30 seconds in 1-second steps. Electronic features common to each timer: -Microprocessor controlled with Game Country’s exclusive software. -All electronic 24 hour digital clock. -Memory backup while changing battery. -Does not use old fashion mechanical clock. -Time delayed test button. -Snap-N-Place battery holder, no wires. -Single 6 Volt battery operation. Battery not included. -Heavy-duty high-torque motor. Mechanical features to each timer: -Heavy-duty, extruded aluminum construction. -Weather-proof, bug-proof and dust proof. -No plastic used, squirrel and coon proof. -Slide-Rods used to easily adjust for different size feed. -Includes all mounting hardware and drill template. -Mechanically, the industry’s most rugged, heavy-duty feeder timers available. -Made in U.S.A. Game Country's 6 gallon Hunter's Green steel bucket with hanging bail. Capacity: 50 lbs., feeds approximately 2-3 weeks. Painted outside with corrosion/rust resistant paint. Coated inside with an epoxy inner liner. A small compact feeder, easy concealment. Ideal for backyard feeding of game, birds and other wildlife.
SKU: 72563
Category: Hunting Game Feeders & Lures

Packs of 25 spark plugs.Great for Marine repair shops.
SKU: 61528
Category: Marine Motor Accessories Spark Plugs And Accessories

Compatible w/35 to 240 ohm remote-mounted gauges. Nonferrous components. SS float arm. 90 deg. rotation.Complete with gasket and screws. Made in USA.
SKU: 59747
Category: Marine Fuel Tanks & Accessories Gauges Capsules & Sending Units